Get ready to pass the AD01 Exam right now using our Blue Prism Developer Exam Package [Q20-Q42] : Free Exams Dumps Materials : http://exams.dumpsmaterials.com

This page was exported from Free Exams Dumps Materials [ http://exams.dumpsmaterials.com ]
Export date: Thu Nov 21 17:10:52 2024 / +0000 GMT

Get ready to pass the AD01 Exam right now using our Blue Prism Developer Exam Package [Q20-Q42]

Get ready to pass the AD01 Exam right now using our Blue Prism Developer Exam Package

A fully updated 2022 AD01 Exam Dumps exam guide from training expert DumpsMaterials

How to Prepare For Blue Prism Developer AD01 Exam

Preparation Guide for Blue Prism Developer AD01 Exam

Introduction to Blue Prism Developer AD01 Exam

Blue Prism Developer AD01 Exam is related to Blue Prism Accredited Developer Certification. This Blue Prism Accredited Developer AD01 Exam validates the ability to keep sensitive data of session Logs and control room, work queues, creation and administration, process flow through decision, choice stages and sub-pages, correct use of action retrying from a process as per Blue Prism standard template. Object Layer Designers and Blue Prism Developers usually hold or will pursue this certification and you can expect the same job role after completing this Blue Prism Accredited Developer certification.

The benefit in Obtaining the AD01 Exam Certification

Get more job opportunities and increase their chances to get a better job
Proves their knowledge to work in Blue Prism development
Candidates can show their skills and expertise in developing solutions based on Blue Prism technology
Candidates can improved capabilities and performance as Blue Prism developer
Include a credential to your resume and help you stand out of the crowd

Difficulty in writing AD01 Exam

Blue Prism Accredited Developer certification is a most privileged achievement one could be graced with. But contrary to common views and opinions certifying with Blue Prism is not that difficult. If the candidates have proper preparation material to pass the AD01 exam with good grades. Certification questions contain the most exceptional questions answers and clarifications which cover the entire course content. Certification questions have a brilliant Blue Prism AD01 exam dumps with most recent and important questions and answers in PDF files. DumpsMaterials is sure about the exactness and legitimacy of Blue Prism AD01 exam dumps and in this manner. Candidates can easily pass Blue Prism AD01 exam with genuine AD01 exam dumps and get Blue Prism certification skillful surely. These exam dumps are viewed as the best source to understand the Blue Prism Accredited Developer well by simply perusing these example questions and answers. If candidate complete practice the exam with certification AD01 exam dumps along with self-assessment to get the proper idea on Blue prism accreditation questions and answers for successful completion of the certification exam. Then he can pass the exam with good grades easily.

Q20. Consider the following process flow from a sub-page of a process:

What is the problem with this sub-page flow?

There is nothing wrong with the sub-page flow shown in this image.

The sub-page process flow is missing any retry exception handling that should exist where a process calls object actions that interface with an application.

For better visibility of the process logic the flow steps shown in the image should be on the main page rather than in a sub-page of the process.

The exception stage within the flow should be removed and replaced with an End stage that returns the found data item as an output parameter.

Q21. Consider the following process flow:

Decision JA” properties are:

Decision “B” properties are.

Decision “C” properties are

What will happen when the process runs?

The flow will pass through calculation stage “A”

The flow will pass through calculation stage “B”

The flow will pass through calculation stage “C”

An exception will be thrown

Q22. Study the following process flow:

This is the Main Page of a simple process which calls the Page Calculation before completing.
The data items are configured as follows:
X is a Number data item with an initial value of 20

Y is a Number data item with an initial value of 5

Result is a Number data item with no initial value

The Calculation page stage is configured as follows:

The Calculation Page is as follows:

The Data Items are configured as follow:
X is a Number data item with an initial value of 10

Y is a Number data item with an initial value of 5

Result is a Number data item with no initial value

The Start Stage is configured pass through the X and Y values an input parameters The divide calculation stage expression is [X] / [Y] The end stage is configured to pass back the results value as an output parameter.
What will be contained in the Result Data Item on the Main Page following the execution of the Process?

No Value

Q23. Which of the following statements regarding the use of Work Queues are correct? (Choose two.)

Control Room allows filtering of the displayed queue items using exact tags and by using wildcards

Wildcards are not allowed in the Tag Filter property of the Work Queues business object Get Next Item action

Work Queue item Status can only be set to Completed or Exception

Tags can be used allow flexibility in the order items are worked within a single Work Queue

Q24. Which of the following indicates a case in a Work Queue is waiting to be worked?
A)

B)

C)

D)

C

Option A

Option B

Option C

Option D

Q25. A screen contains four buttons, Find, Save, Close and New. When the buttons are spied, the attributes are identical except for the Window Text attribute.
The values for the Windows Text attribute are Find’ for the Find button. ‘Save’ for the Save button, Close’ for the Close button and New’ for the New Button.
The Dynamic Button element has been spied and has the following attributes set:

What additional configuration is required to ensure the Close button is selected by the Navigate stage?

Set the Mouse Button value to Close’

The Params button must be selected and the parameter configured to override the Window Text attribute value to ‘Close’

It is not possible to select the Close button using the Dynamic Button element because the value is set to
‘Find in the Application Modeller

A new element is required with the Window Text value set to “Close and the Match Type set to equal

Q26. Which of the following flows can you not create in Blue Prism? (select 2 responses) A:

B:

C:

D:

Option A

Option B

Option C

Option D

Q27. Consider the following process flow from the Main Page of a process in Process Studio:

Thinking about the standard Blue Prism Process Templates, what is wrong with this Main Page process flow?

There is nothing wrong with the Main Page flow shown in the image, it is a copy of Blue Prism’s standard Process Template

The Stop? decision stage should be removed from the process flow, as Stop time is Configured either within the Scheduler process are stopped via Control Room.

The Mam Page process flow is too high level For better visibility of the process logic the flow steps hidden m the sub-pages should al be on the main page instead.

There is no exception handling on this Main Page so any exceptions that “bubble up” will cause the process to terminate rather than exceptions being handled correctly.

The Reset Global Data page is not required because sub-page within a process should always use input parameter rather than global data items. There should be no global data to reset.

Q28. Which of the following indicates a case has been worked successfully in a Work Queue?

B)

C)

D)

Option A

Option B

Option C

Option D

Q29. A process contains only 4 stages. Study the following process flow:

The data item ‘Result’ is a number data item with an initial value of 2.
The calculation stage is configured as follows:

Following the execution of the Perform Calculation stage, which of the following is true?

The data item Result will contain 3

The data item Result will contain 5

The process will throw an exception

None of these statements are correct

Q30. You identify an element in Application Modeller but when you highlight or use that element Blue Prism gives you an error message saying that duplicate elements were found.
Which of the following statements is true?

It is common for duplicate elements to be found based upon the attributes that are ticked by default using the Blue Prism product. Time needs to be spent experimenting with the attribute ticks until a unique, reliable, and consistent selection of attributes is found.

It will not be possible to interface with the element in a unique way. You will need to use Surface Automation techniques for this element.

A code stage interface will need to be created and used for this application, this will give you more flexibility to interact with the application elements.

You will need to make the attributes you have selected dynamic. This will allow your flow to loop around, incrementing the attribute value until the correct element is found and used.

Q31. Study the process flow below:

The outputs for the Get Next Case are configured below:

A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q32. The Work Queue ‘Account Closure has a number of Pending Items which may be tagged as “Current”,
“Saving” or “Loan” What is the correct configuration to get the next item from the queue that is tagged either
“Current” or “Loan”?

Configure “Current or Loan” in the Tag Filter parameter

Configure “-Saving” in the Tag Filter parameter

Configure “Current; Loan: in the Tag Filter parameter

Configure “Current + Loan'” in the Tag Filter parameter

Q33. Consider the following process flow:

Decision “A” properties are:

Decision “B” properties are:

Decision “C” properties are:

What will happen when the process runs?

The flow will pass through calculation stage “A”

The flow will pass through calculation stage “B”

The flow will pass through calculation stage “C”

An exception will be thrown

Q34. The Order System application has been successfully launched and Blue Prism has navigated the application to the following screen:

There is a requirement to ensure this screen is in focus before any further interfacing is done with the screen. Which is the correct configuration to ensure the New Order screen is in focus?

Option

Q35. Which of the following can you perform in Control Room? (select all that apply)

Refresh a Work Queue

Create a Work Queue

Encrypt a Work Queue

Rename a Work Queue

Q36. Consider the following process flow:

What is the problem with this flow?

There is nothing wrong with this flow.

The exception handling in this flow can be removed because an Attach action in a navigate stage should always work if configured correctly

The Attach Block should be enlarged to also include the Waited Long Enough decision stage.

The flow contains a recover stage and a route from it without a resume stage. This will cause internal errors on future exceptions thrown in the same session.

The 0.5 second wait stage should be removed so that the retries can be performed at full speed.

Q37. Examine the following Blue Prism Process diagram:

The Process contains logic in the ‘Control Room Stop Request?’ Decision stage, to recognise when a Process Controller has used the ‘Request Stop’ feature in Control Room, to bring the Process to a controlled stop.
What expression would you use in the ‘Control Room Stop Request?’ Decision stage, to ensure that the Process recognises that the Control Room ‘Request Stop’ command has been triggered?
(Remember, Blue Prism expressions are case sensitive)

Q38. The Order System application has been successfully launched and Blue Prism has navigated the application to the following screen:

There is a requirement to ensure this screen is in focus before any further interfacing is done with the screen. Which is the correct configuration to ensure the New Order screen is in focus?
A)

B)

C)

D)

Exhibit A

Exhibit B

Exhibit C

Exhibit D

Q39. The Order System application has been successfully launched and Blue Prism has navigated the application to the following screen:

There is a requirement to ensure this screen is in focus before any further interfacing is done with the screen.
Which is the correct configuration to ensure the New Order screen is in focus?

Q40. Study the following diagram which is an extract from a sub-page of a process being tested in Process Studio:

There are no breakpoints in the “Access Customer Account” subpage however there is an error.
What will happen if you choose to step out (SHIFT + F11) when debugging the process?

The process will work all stages in the “Access Customer Account” page until the error is thrown and then focus would move to the breakpoint at “Get Customer Details” stage.

The process will work all stages in the “Access Customer Account” page until the error is thrown and then focus would move to the “Recover1” stage.

The process will work all stages in the “Access Customer Account” page until the error is thrown and then focus would move to the stage containing the error on the “Access Customer Account” page.

The process will work all stages in the “Access Customer Account” page until the error is thrown and then focus would move to the “Exception1” stage.

Q41. Examine the flow below:

An error has been encountered on Page 1 and the exception has bubbled up to be recovered in the Recoverd stage The Yes’ path has been taken from the “Throw new Exception?” decision stage. Consider the Throw Exception stage properties below:

How should the properties be configured for the Process to throw a new Business exception, i.e. a different exception to the one encountered in Page?

Configure ExceptionType() in the Exception Type field and ExceptionDetail() in the Exception Detail field. Leave the Preserve the type and detail of the current exception checkbox un-ticked.

Tick the Preserve the type and detail of the current exception checkbox. Leave the Exception Type and Exception Detail fields blank

Leave the Exception Type field blank and type “Business Exception” in the Exception Detail field.

Type Business Exception in the Exception Type field and type a custom message in the Exception Detail field.

Q42. Consider the following flow in an object:

Which of these statements is true?

The flow shown in the diagram is correct, the wart stages are all adding a high level of robustness to the action

The wait stages after read and write stages should be removed they are not required and are lowing the flow down

The wait stages after read stages should be removed, the wart stages after write stages should be left because the application will have been changed

Only the first wait stage in this flow is required, all the other wait stages should be removed.

Master 2022 Latest The Questions Blue Prism Developer and Pass AD01 Real Exam!: https://www.dumpsmaterials.com/AD01-real-torrent.html

Post date: 2022-10-07 11:57:13
Post date GMT: 2022-10-07 11:57:13
Post modified date: 2022-10-07 11:57:13
Post modified date GMT: 2022-10-07 11:57:13