Updated Oct-2022 Test Engine to Practice JN0-663 Dumps & Practice Exam [Q36-Q55] : Free Exams Dumps Materials : http://exams.dumpsmaterials.com

NEW QUESTION 36
Exhibit:

Your network is connected to two different ISPs and you notice that they are using your network for transit traffic.
In this scenario, which two configuration statements will solve this problem? (Choose two.)

set policy-options policy-statement ISP term ROUTES then reject

set policy-options as-path LOCAL-ROUTES “()”

set policy-options policy-statement ISP term REST then reject

set policy-options as-path LOCAL-ROUTES ” (65310 I 65441)+”

NEW QUESTION 37
Exhibit.

You are the administrator of AS 65512 You are learning the 192 168 1 0/24 prefix from both AS 100 and AS
200 You want traffic destined to the 192 168 1.0.0/24 prefix to exit your AS towards AS 200 How would you accomplish this task’?

Configure an import routing policy on PE-2 to modify the origin attribute on the path learned from AS
100

Configure an import routing policy on PE-2 to append the AS path attribute on the path learned from AS
100

Configure an import routing policy on PE-2 to set a higher MED on the path learned from AS 100

Configure an import routing policy on PE-2 to set a higher local preference value on the path learned from AS 200

NEW QUESTION 38
Exhibit:

A Layer 3 VPN exists in the provider network and the CE devices are connecting to the PE devices using BGP. The PE devices are receiving BGP routes from the CE devices and the PE devices have the CE BGP routes in their respective routing tables. However, the remote CE devices are not receiving the BGP routes.
Referring to the exhibit, what is the problem?

The CE devices are detecting an AS loop

A VRF target community mismatch exists.

A route distinguisher mismatch exists.

The PE devices are detecting an AS loop.

NEW QUESTION 39

You are receiving the same 200.0.0.0/24 BGP route from four different ISPs.
Referring to the exhibit, which ISP’s route would be selected as active?

ISP-B

ISP-A

ISP-C

ISP-D

NEW QUESTION 40
Exhibit.

Referring to the exhibit, which two statements are correct for a route advertised by R1 towards R4? (Choose two )

The BGP next hop is set to 192.168.2 2 by R2

The BGP next hop is set to 14.1 1.1 byR2

The AS path is set to null by R2

The AS path is set to 150 by R2

NEW QUESTION 41
Exhibit:

Referring to the exhibit, you have recently established a Layer 3 VPN between PE-1 and PE-2, connecting the two CE sites. Rowing information is being shared between sites and the customer has two-way communication After adding this VPN to your core network, PE-1 and PE-2 are no longer able to forward traffic to the Internet.
In this scenario, what is the problem?

You must configure the inet unicast NLRI for the BGP session on both your PE devices.

You must configure a separate internal BGP group on both your PE devices specifically for Internet connectivity.

You must configure the inet-vpn NLRI for the BGP sessions on both your PE devices.

You must configure a multihop external BGP session between your PE devices and the Internet provider’s ISP-A device.

NEW QUESTION 42
Click the Exhibit button.

A network administrator is investigating why traffic from R2 is not being forwarded to R1 Referring to the show isis database command output shown in the exhibit, what is causing this problem on the network?

R1 and R2 are in different IS-IS areas.

The preferred interface between R1 and R2 is experiencing errors

R1 is configured to drop all incoming traffic.

R2 is ignoring specific LSPs from R1 in its SPF calculations.

NEW QUESTION 43
Exhibit:

Referring to the exhibit, which statement is true?

The route is learned from only one neighbor.

This is a multipath route.

The route is learned from three different neighbors.

This is a multihop route.

NEW QUESTION 44
Exhibit:

Referring to the exhibit, you are asked to summarize all routes in the 10.10.0 0/22 address range ensuring that a single summary route is present in area 49.0002 while the IS-IS internal contributing routes are restricted to area 49.0001. All other routes must not be affected.
Which two operations would have to be performed on R2 to accomplish this task? (Choose two.)

Create and apply a policy with a single term to accept only the summary route.

Include the from level 1 match criteria when referencing the summary route.

Include the to level 2 match criteria when referencing the summary route.

Create and apply a policy with two terms; one to accept the summary route and one to reject the contributing routes.

NEW QUESTION 45
Exhibit:

Referring to the exhibit, the local BGP router is receiving IPv4 routes from the BGP neighbor, but it is not receiving L3 VPN routes from the BGP neighbor.
Which two actions should you take to solve this problem? (Choose two.)

Configure the family inet-vpn unicast statement on the local BGP router.

Configure the family inet unicast statement on the local BGP router.

Configure the family inet unicast statement on the BGP neighbor

Configure the family inet-vpn unicast statement on the BGP neighbor.

NEW QUESTION 46
Exhibit:

Referring to the exhibit, which two statements about route reflectors are correct? (Choose two.)

RR2 adds its cluster ID when advertising routes from CHent4 to Client3.

RR2 advertises routes learned from Client3 to EBGP2 with itself as the next hop.

RR1 advertises routes learned from Client1to RR2 with itself as the next hop.

RR1 and RR2 need the same cluster ID to exchange routes learned from their clients.

NEW QUESTION 47
You have a mixed vendor EVPN environment and you need to ensure VXLAN interoperability between all devices.
In tins scenario, winch statement is correct?

You should only use pure Type 2 routes.

You should only use pure Type 5 routes.

You should only use Type 2 and Type 5 routes.

You should only use Type 6 and Type 2 routes.

NEW QUESTION 48

You have an established Layer 3 VPN between two PE devices. You are asked to only send certain routes from PE-1 over the VPN to the remote site while maintaining all the routes on the PE-1 device. You created a policy that matches the specific routes and then tags these routes with the appropriate target community values.
In this scenario, which configuration changes must be made to satisfy the requirement?

Configure the export parameter and apply the policy to the my-ext-groupBGP group configuration.

Configure the vrf-exportparameter and apply the policy under the edit routing-instances vpn-ahierarchy.

Configure a RIB group and apply the policy as an import policy to routes distributed into the bgp.13vpn.0 routing table.

Configure the import parameter and apply the policy to the my-ext-groupBGP group configuration.

NEW QUESTION 49

Referring to the exhibit, which path would traffic passing through R1 take to get to R6?

R1 -> R2 -> R4 -> R6

R1 -> R2 -> R3 -> R6

R1 -> R3 -> R5 -> R6

R1 -> R3 -> R4 -> R6

NEW QUESTION 50
Exhibit.

You are troubleshooting a problem with a BGP peer where BGP routes are not being accepted from that peer Referring to the exhibit, which two statements are correct*? (Choose two )

Term 0 is missing a terminating action that allows BGP routes to be accepted

You cannot have terminating actions outside of terms.

The reject at the end of the policy is preventing the routes from being accepted.

Term 0 is missing a route-fitter that specifies the allowed routes

NEW QUESTION 51
Exhibit:

The route shown in the exhibit is an example of which type of next-generation MVPN route?

Type 3 Selective MVPN autodiscovery route

Type 1 Intra-AS inclusive MVPN membership discovery

Type 2 Inter-AS inclusive MVPN membership discovery

Type 4 Selective MVPN autodiscovery route for leaf

NEW QUESTION 52
You want to allow the load balancing of traffic for an EBGP route from two different peers in the same AS.
Which three actions are needed to accomplish this task? (Choose three.)

A policy to load-balance traffic should be applied to the forwarding table

At least two interfaces should be connected to the same EBGP neighbor

The multihop parameter should be configured under protocols BGP

The multipath parameter should be configured under protocols BGP

An equal cost AS path for the route is required.

NEW QUESTION 53

Referring to the exhibit, there is a Layer 3 VPN setup that connects sites CE-A-1, CE-A-2, and CE-A-3 together. Host-1 can communicate with Host-3, but Host-1 cannot communicate with Host-2.
What must you do to solve the problem?

Change the route distinguisher in both routing instances to the same value.

Use the next-tableconfiguration statement for static routes in the corresponding routing instances.

Use BGP instead of static routing between the CE and PE devices.

Use the auto-exportcommand in both routing instances.

NEW QUESTION 54
Exhibit:

Your network is connected to two different ISPs and you notice that they are using your network for transit traffic.
In this scenario, which two configuration statements will solve this problem? (Choose two.)

set policy-options policy-statement ISP term ROUTES then reject

set policy-options as-path LOCAL-ROUTES “()”

set policy-options policy-statement ISP term REST then reject

set policy-options as-path LOCAL-ROUTES ” (65310 I 65441) +”

NEW QUESTION 55
Exhibit:

Referring to the exhibit, you need to implement VPLS between CE-A1 and CE-A2 You must ensure that no loops are created due to the multihoming of the connection from CE-A2 to PE2 and PE3.
Based on the type of VPLS, which two solutions will satisfy this requirement? (Choose two.)

In a BGP VPLS, configure a primary and backup neighbor.

In an LDP VPLS. configure multihoming and local preference on PE-2 and PE-3

In an LDP VPLS, configure a primary and backup neighbor.

In a BGP VPLS, configure multihoming and local preference on PE-2 and PE-3.

Updated Oct-2022 Test Engine to Practice JN0-663 Dumps & Practice Exam [Q36-Q55]

What is the duration of the Service Provider Routing and Switching, Professional JN0-663 Exam