Ultimate Guide to the C-THR86-2111 - Latest Dec 01, 2022 Edition Available Now [Q42-Q65] : Free Exams Dumps Materials : http://exams.dumpsmaterials.com

NEW QUESTION 42
Your customer requires the stock budget allocation for each employee to be visible on the compensation worksheet. How can you achieve this?
Please choose the correct answer

Add a new budget calculation based on “User” and use “STOCK_BUDGET_STOCK_AMOUNT” as the import key.

Create a custom field and pull data from the “STOCK_BUDGET_STOCK_AMOUNT” column of the user U data file (UDF)

Create a custom field and use the Direct Amount budget mode for stocks.

Add a guideline field in the design worksheet labeled as “Stock Budget Allocation”.

NEW QUESTION 43
In Admin Tools, you configure a merit budget based on a percentage ofthe current salary. In the ‘Based On’ dropdown option you select ‘User’. How would you define the budget percentage? Please choose the correct answer.

Import a percentage for each employee in the user data file (UDF).

Assign each user to a budget group and then assign group percentages.

Use default percentage for all users.

Assign a percentage to each user in the Budget Assignment section.

NEW QUESTION 44
Your customer needs to remove a compensation statement fromthe system for one employee that was NOT eligible for a merit increase. How can you accomplish this? Please choose the correct answer.

Recall the compensation statement for the employee.

Remove the employee from the compensation form and regenerate thse statement

Make the employee ineligible for a merit increase using the eligibility engine.

Remove the employee from the compensation form and run the ‘Update all worksheet’ job.

NEW QUESTION 45
In Admin Tools, you load a pay matrix table as shown in the attached screenshot. You map attribute 1 to business unit and attribute 2 department. On the compensation worksheet, anemployee is in the Operations department, the ABC business unit, and pay grade 3. The employee’s current range penetration is calculated as exactly 100% What is the employee’s current annual salary? Please choose the correct answer.

72000

90000

66000

85000

NEW QUESTION 46
You set the Reportable option of a custom field to true in the Column Designer. In which reports does this field appear?
There are 3 correct answers.

Executive review

Ad hoc

Aggregate export

Standard YouCalc widget

Rollup

NEW QUESTION 47
Each employee has a custom number code assigned to them, However, your customer wants to display the name instead of the code on the worksheet. If the code is NOT in the table, the customer wantsblanks to be displayed. What would you define as the last row in your lookup table? Please choose the correct answer.

A blank in the input agreement with blanks as the output.

N/A as the input agreement with blanks as the output.

FALSE as the input agreement with blanks as the output.

An asterisk (*) in the input agreement with blanks as the output.

NEW QUESTION 48
Yourcustomer is setting up a stock factor table based on job level, as shown in the attached screen shot. Which job level is properly configured? Please choose the correct answer.

MGR_3

MGR_4

MGR_1

MGR_2

NEW QUESTION 49
Which of the following functions in the Admin Tools can you use to delete compensation worksheets for active planners?
There are 2 correct answers.

Manage worksheets

Delete form

Update compensation worksheet

Delete employees

NEW QUESTION 50
What can you do with a compensation profile? There are 3 correct answers.

Import salary history into the profile

Promote an employee

Enter recommendations.

View budget.

Display salary history.

NEW QUESTION 51
You set up a merit guideline rule based on the performance rating. You import guideline formulas as shown in the attached screenshot. According to the imported formulas, what is the minimum merit guideline if an employee’s performance rating is 4? Please choose the correct answer.

NEW QUESTION 52
You create a test User Data File (UDF) for use with a compensation template. The template uses the Second Manager hierarchy. TheCEO is head of both hierarchies.
In the user record of the CEO, what values would you use for the MANAGER and SECOND_MANAGER columns? Please choose the correct answer.

MANGER: NO_MANAGER U SECOND_MANAGER: blank

MANGER: blank
SECOND_MANAGER: blank

MANGER: NO_MANAGER V U SECOND MANAGER: NO MANAGER

MANGER: blank
SECOND MANAGER: NO MANAGER

NEW QUESTION 53
Your customer uses a look-up table to calculate custom budgets as shown in the attached screenshot. The budget is based on an employee’s country and status. In the template, the country is defined with the field ID
‘customCountry’ and the status isdefined with the field ID ‘customStatus’.
You need to create a custom field that contains the look-up value foe the promotion budget percent. What is the correct syntax for the calculated field?
Please choose the correct answer.

lookupC’2012_Custom_Budget_Poor” customCountry, customStatus,3)

lookup(“2012_Custom_Budget_PooP customCountry, customStatus, 1)

lookup(“2012_Custom_Budget_PooP customCountry, customStatus,promotion)

lookup(“2012_Custom_Budget_PooP customCountry, customStatus)

NEW QUESTION 54
You want an administrator that is excluded from the route map to make compensation recommendations. What feature allows this?
Please choose the correct answer.

Compensation profile

Executive review

New compensation worksheet

Ad hoc reporting

NEW QUESTION 55
Which of the following options reflects a best practice for configuring compensation plan guidelines? Please choose the correct answer.

Add a formula without any criteria at the bottom of the guideline list to act as a default.

Make sure the Enable Guideline Optimization checkbox is selected if your customer has less than 1,000 ^ guidelines.

Allow planners to enter negative salary adjustment recommendations.

Always arrange guideline formulas in order by performance rating and comp ratio.

NEW QUESTION 56
You want to extract the entire compensation from SuccessFactors and import it to your own Human Resource Information System (HRIS). Which report must you run to capture compensation data from your current compensationplan? Please choose the correct answer.

Spreadsheet report

Aggregate export report

Compensation adjustment report

Budget roll-up report

NEW QUESTION 57
What does SAP recommend you do when you copy a compensation plan template for a new cycle?There are 2 correct answers

Create a new currency conversion table for the new cycle.

Update look-up tables referenced in the previous compensation cycle.

Update salary range tables referenced in the previous compensation cycle.

Recreate relevant rules in the eligibility engine for the new compensation cycle.

NEW QUESTION 58
Your customer has customized two compensation statements from the SuccessStore. One statement is used for employees in the Manufacturing department and the other is used for all other employees. How do you make sure that the Manufacturing employees receive the proper statement? Please choose the correct answer.

Use role-based permissions in Admin Tools

Assign statement groups under Complete Compensation Cycle.

Make theManufacturing statement template the default template.

Set default permissions for the statement template under Action for All Plans.

NEW QUESTION 59
According to SuccessFactors’ best practice, what must you include when you set up a compensation route map? Please choose the correct answer.

A staging step as the last modify step

At least five steps ofmanager review and approval

A signature step as the final step before completion

The Get Feedback button in the HR approval step

NEW QUESTION 60
In the user data file (UDF), what can you populate in the column
COMPENSATION_SALARY_RATE_UNITS? Please choose the correct answer.

8.3%

MONTHLY

$6,500

012

NEW QUESTION 61
You want to display the percentage of employees in each pay grade who are eligibleto receive a stock grant.
Which of the following activities must you perform to do this? Please choose the correct answer.

Create an eligibility engine rule in the Admin Tools which defines stock eligibility by pay grade.

Upload a stock participation guideline table CSV file in the Admin Tools.

Import the value TRUE in the STOCK_UNITS_ELIGIBLE column of the user data file (UDF) for users with eligible pay grades.

Create a custom stock field with a formula that calculates stock grant percentages per pay grade.

NEW QUESTION 62
Which compensation function requires the job code and pay grade mapping table? Please choose the correct answer.

Compensation History

Calculating Compa-Ratio

Cascading Budget

Job Selector

NEW QUESTION 63
You configure the following salary rule in the compensation plan template XML. <comp-salary-rule use For-‘merit” benchmark-‘range-penetration” actionOnExceed=”disallow”>

A popup message asks the planner if the exceeded amount should be assigned to lump sum. The ^ planner can save the merit recommendation by selecting “Cancel” in the pop-up message.

The rule alerts the planner that the range penetration threshold has been exceeded and the merit field ^ text turns red. The planner saves the merit recommendation.

The rule prevents the planner from saving the merit increase. The planner must go back and change their
^ merit recommendation.

A popup message asks the planner if the exceeded amount should be assigned to lump sum. The ^ planner cannot save the merit increase by selecting “Cancel” in the pop-up message.

NEW QUESTION 64
Your customer wants theguidelines for an employee’s merit recommendation to be prorated based on the employee’s date of last hire. The date of last hire is different than the employee’s original hire date. How can you fulfill this requirement? Please choose the correct answer.

Use salary proration and import the employee’s last hire date in the V U SALARY_PRORATING_START_DATE column of the user data file (UDF).

Use salary proration and set the review start date equal to the employee’s last hire date.

Use raise proration and import the employee’s last hire date in the
RAISE_PRORATING_START_DATE ^ column of the user data file (UDF).

Use raise proration and import a proration factor in the RAISE_PRORATING column of the user data file U (UDF).

NEW QUESTION 65
Your customer wants to change the background ofthe compa-ratio percent display. Which tag in the compensation plan template XML can you use? Please choose the correct answer.

showColorBar

backgroundColor

comp-benchmark-color

comp-guideline-pattern

Ultimate Guide to the C-THR86-2111 - Latest Dec 01, 2022 Edition Available Now [Q42-Q65]

SAP C-THR86-2111 Exam Syllabus Topics: