This page was exported from Free Exams Dumps Materials [ http://exams.dumpsmaterials.com ] Export date:Tue Dec 3 17:26:07 2024 / +0000 GMT ___________________________________________________ Title: CheckPoint 156-315.80 Real Exam Questions Guaranteed Updated Dump from DumpsMaterials [Q25-Q49] --------------------------------------------------- CheckPoint 156-315.80 Real Exam Questions Guaranteed Updated Dump from DumpsMaterials Verified Pass 156-315.80 Exam in First Attempt Guaranteed How much 156-315.80 Exam Cost The price of The price of the 156-315.80 exam is $250 USD. Difficulty in writing 156-315.80 Exam CheckPoint 156-315.80 exam help Candidates in developing their professionals and academic career and It is a very tough task to pass CheckPoint 156-315.80 exam for those Candidates who have not done hard work and get some relevant CheckPoint 156-315.80 exam preparation material. There are many peoples have passed CheckPoint 156-315.80 exam by following these three things such as look for the latest CheckPoint 156-315.80 exam dumps, get relevant 156-315.80 exam dumps and develop their knowledge about CheckPoint 156-315.80 exam new questions. At the same time, it can also stress out some people as they found passing CheckPoint 156-315.80 exam a tough task. It is just a wrong assumption as many of the peoples have passed CheckPoint 156-315.80 exam questions. All you have to do is to work hard, get some relevant 156-315.80 exam preparation material and go thoroughly from them. DumpsMaterials is here to help you with this problem. We have the relevant 156-315.80 exam preparation material which are providing the latest CheckPoint 156-315.80 exam questions with the detailed view of every CheckPoint 156-315.80 exam topic. DumpsMaterials offered a 156-315.80 exam dumps which are more than enough to pass the CheckPoint 156-315.80 exam questions. We are providing all thing such as 156-315.80 exam dumps, CheckPoint 156-315.80 practice test, and CheckPoint 156-315.80 pdf exam dumps that will help the candidate to pass the exam with good grades   NO.25 The Firewall kernel is replicated multiple times, therefore:  The Firewall kernel only touches the packet if the connection is accelerated  The Firewall can run different policies per core  The Firewall kernel is replicated only with new connections and deletes itself once the connection times out  The Firewall can run the same policy on all cores NO.26 Check Pont Central Deployment Tool (CDT) communicates with the Security Gateway / Cluster Membersover Check Point SIC _____________ .  TCP Port 18190  TCP Port 18209  TCP Port 19009  TCP Port 18191 NO.27 When gathering information about a gateway using CPINFO, what information is included or excluded when using the “-x” parameter?  Includes the registry  Gets information about the specified Virtual System  Does not resolve network addresses  Output excludes connection table References:NO.28 Which of the following is NOT a VPN routing option available in a star community?  To satellites through center only.  To center, or through the center to other satellites, to Internet and other VPN targets.  To center and to other satellites through center.  To center only. NO.29 Which statement is not TRUE about Default synchronization?  Using UDP Multicast Broadcast on port 8161  Using UDP Multicast on port 8116  Quicker than Full sync  Transfer changes in the kernel tables between cluster members NO.30 SmartEvent does NOT use which of the following procedures to identify events:  Matching a log against each event definition  Create an event candidate  Matching a log against local exclusions  Matching a log against global exclusions ExplanationEvents are detected by the SmartEvent Correlation Unit. The Correlation Unit task is to scan logs for criteria that match an Event Definition. SmartEvent uses these procedures to identify events:* Matching a Log Against Global Exclusions* Matching a Log Against Each Event Definition* Creating an Event Candidate* When a Candidate Becomes an EventReferences:NO.31 In the Check Point Firewall Kernel Module, each Kernel is associated with a key, which specifies the type of traffic applicable to the chain module. For Wire Mode configuration, chain modules marked with____________ will not apply.  ffff  1  2  3 NO.32 Sticky Decision Function (SDF) is required which to prevent which of the following? Assume you set up an Active cluster.  Symmetric routing  Failovers  Asymmetric routing  Anti-spoofing NO.33 The Firewall Administrator is required to create 100 new host objects with different IP addresses. What API command can he use in the script to achieve the requirement?  add host name <New HostName> ip-address <ip address>  add hostname <New HostName> ip-address <ip address>  set host name <New HostName> ip-address <ip address>  set hostname <New HostName> ip-address <ip address> NO.34 What are the different command sources that allow you to communicate with the API server?  SmartView Monitor, API_cli Tool, Gaia CLI, Web Services  SmartConsole GUI Console, mgmt._cli Tool, Gaia CLI, Web Services  SmartConsole GUI Console, API_cli Tool, Gaia CLI, Web Services  API_cli Tool, Gaia CLI, Web Services Reference: https://sc1.checkpoint.com/documents/R80/APIs/#introduction%20NO.35 Which TCP-port does CPM process listen to?  18191  18190  8983  19009 NO.36 Pamela is Cyber Security Engineer working for Global Instance Firm with large scale deployment of Check Point Enterprise Appliances using GAiA/R80.10. Company’s Developer Team is having random access issue to newly deployed Application Server in DMZ’s Application Server Farm Tier and blames DMZ Security Gateway as root cause. The ticket has been created and issue is at Pamela’s desk for an investigation. Pamela decides to use Check Point’s Packet Analyzer Tool-fw monitor to iron out the issue during approved Maintenance window. What do you recommend as the best suggestion for Pamela to make sure she successfully captures entire traffic in context of Firewall and problematic traffic?  Pamela should check SecureXL status on DMZ Security gateway and if it’s turned ON. She should turn OFF SecureXL before using fw monitor to avoid misleading traffic captures.  Pamela should check SecureXL status on DMZ Security Gateway and if it’s turned OFF. She should turn ON SecureXL before using fw monitor to avoid misleading traffic captures.  Pamela should use tcpdump over fw monitor tool as tcpdump works at OS-level and captures entire traffic.  Pamela should use snoop over fw monitor tool as snoop works at NIC driver level and captures entire traffic. NO.37 Fill in the blank: The R80 feature _____ permits blocking specific IP addresses for a specified time period.  Block Port Overflow  Local Interface Spoofing  Suspicious Activity Monitoring  Adaptive Threat Prevention ExplanationSuspicious Activity Rules SolutionSuspicious Activity Rules is a utility integrated into SmartView Monitor that is used to modify access privileges upon detection of any suspicious network activity (for example, several attempts to gain unauthorized access).The detection of suspicious activity is based on the creation of Suspicious Activity rules. Suspicious Activity rules are Firewall rules that enable the system administrator to instantly block suspicious connections that are not restricted by the currently enforced security policy. These rules, once set (usually with an expiration date), can be applied immediately without the need to perform an Install Policy operation.NO.38 Office mode means that:  SecurID client assigns a routable MAC address. After the user authenticates for a tunnel, the VPN gateway assigns a routable IP address to the remote client.  Users authenticate with an Internet browser and use secure HTTPS connection.  Local ISP (Internet service Provider) assigns a non-routable IP address to the remote user.  Allows a security gateway to assign a remote client an IP address. After the user authenticates for a tunnel, the VPN gateway assigns a routable IP address to the remote client. Explanation/Reference: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk30545NO.39 Which Mobile Access Application allows a secure container on Mobile devices to give users access to internal website, file share and emails?  Check point Remote User  Check point Capsule Workspace  Check point Mobile web portalD .Check point Capsule Remote NO.40 What needs to be configured if the NAT property ‘Translate destination or client side’ is not enabled in Global Properties?  A host route to route to the destination IP.  Use the file local.arp to add the ARP entries for NAT to work.  Nothing, the Gateway takes care of all details necessary.  Enabling ‘Allow bi-directional NAT’ for NAT to work correctly. NO.41 Which command is used to set the CCP protocol to Multicast?  cphaprob set_ccp multicast  cphaconf set_ccp multicast  cphaconf set_ccp no_broadcast  cphaprob set_ccp no_broadcast Reference: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk20576NO.42 How often does Threat Emulation download packages by default?  Once a week  Once an hour  Twice per day  Once per day NO.43 Which one of the following is true about Capsule Connect?  It is a full layer 3 VPN client  It offers full enterprise mobility management  It is supported only on iOS phones and Windows PCs  It does not support all VPN authentication methods NO.44 In SmartConsole, objects are used to represent physical and virtual network components and also some logical components. These objects are divided into several categories. Which of the following is NOT an objects category?  Limit  Resource  Custom Application / Site  Network Object NO.45 You noticed that CPU cores on the Security Gateway are usually 100% utilized and many packets were dropped. You don’t have a budget to perform a hardware upgrade at this time. To optimize drops you decide to use Priority Queues and fully enable Dynamic Dispatcher. How can you enable them?  fw ctl multik dynamic_dispatching on  fw ctl multik dynamic_dispatching set_mode 9  fw ctl multik set_mode 9  fw ctl multik pq enable Explanation/Reference: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk105261NO.46 What SmartEvent component creates events?  Consolidation Policy  Correlation Unit  SmartEvent Policy  SmartEvent GUI Explanation/Reference: https://sc1.checkpoint.com/documents/R76/CP_R76_SmartEvent_AdminGuide/17401.htmNO.47 Which command will allow you to see the interface status?  cphaprob interface  cphaprob -I interface  cphaprob -a if  cphaprob stat NO.48 Ken wants to obtain a configuration lock from other administrator on R80 Security Management Server. He can do this via WebUI or via CLI.Which command should he use in CLI? (Choose the correct answer.)  remove database lock  The database feature has one command lock database override.  override database lock  The database feature has two commands lock database override and unlock database. Both will work. References:NO.49 Which statements below are CORRECT regarding Threat Prevention profiles in SmartDashboard?  You can assign only one profile per gateway and a profile can be assigned to one rule Only.  You can assign multiple profiles per gateway and a profile can be assigned to one rule only.  You can assign multiple profiles per gateway and a profile can be assigned to one or more rules.  You can assign only one profile per gateway and a profile can be assigned to one or more rules.  Loading … Download Real CheckPoint 156-315.80 Exam Dumps Test Engine Exam Questions: https://www.dumpsmaterials.com/156-315.80-real-torrent.html --------------------------------------------------- Images: https://exams.dumpsmaterials.com/wp-content/plugins/watu/loading.gif https://exams.dumpsmaterials.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2023-01-10 13:54:27 Post date GMT: 2023-01-10 13:54:27 Post modified date: 2023-01-10 13:54:27 Post modified date GMT: 2023-01-10 13:54:27