Pass Your Juniper Exam with JN0-363 Exam Dumps (Updated 265 Questions) [Q19-Q33] : Free Exams Dumps Materials : http://exams.dumpsmaterials.com

Q19. An Ethernet bridge is configured such that all interfaces are in a single broadcast domain.Which two tasks does the bridge perform in response to receiving a frame with an unknown unicast destination MAC address? (Choose two.)

It drops the frame.

It floods the frame out of all interfaces except the one on which is was received.

It learns the destination MAC address.

It learns the source MAC address.

Q20. How does a Junos device learn about MAC addresses when II is first connected to an Ethernet LAN?

The device sends out a network broadcast message asking tor all devices and MAC addresses on the network and stores this information In addition lo the interface from which the response was received.

The device learns the destination MAC addresses from traffic in the network and stores this MAC address in addition to the interface from which the traffic was received.

The device learns the source MAC addresses from traffic in the network and stores this MAC address in addition to the interface from which the traffic was received.

The device sends out a network multicast message asking for all devices and MAC addresses on the network and stores this Information in addition to the interface from which the response was received.

Q21. You are asked to configure and apply a new routing policy to influence routing advertisements received from a specific EBGP peer.
In this scenario, which statement is true?

The new policy should be applied as an export policy for the specific EBGP peer.

The new policy should be applied as an import policy for the specific EBGP peer.

The new policy should be applied as an export for the EBGP group in which the peer is defined.

The new policy should be applied as an import policy for the EBGP group in which the peer is defined.

Q22. You have two OSPF routers that are trying to form an adjacency. When you issue the command show ospf neighbor, you see that one router is in the loading state and the other is in the full state.Why are you seeing the router’s state as loading?

The router does not know about the received LSA header and has transmitted a link-state request.

The router has finished transmitting, but is still receiving database information.

The router is waiting for a start event.

The router has established bidirectional communication with its peer.

Q23. You are bringing a new network online with three MX Series devices enabled for STP. No root bridge priority has been configured. Which statement is true in this scenario?

The device with the lowest MAC address will be elected as the root bridge.

The device with the highest MAC address will be elected as the root bridge.

The device with the lowest numerical lo0 IP address will be elected as the root bridge.

The device with the highest numerical lo0 IP address will be elected as The bridge.

Q24. Click the Exhibit button. You have two routers connected over a Gigabit Ethernet link as shown in the exhibit It is required that an IS-IS adjacency be established without the need for a designated intermediate system (DIS)

Which configuration statement entered on both routers will achieve this goal?

set interface ge-0/0/2 unit 0 family iso no-dis

set interface ge-0/0/2 unit 0 family iso point-to-point

set protocols isis interface ge-0/0/2.0 no-dis

set protocols isis interface ge-0/0/2.0 point-to-point

Q25. Which prefix in the output shown in the exhibit is an external prefix injected by an OSPF router?

192.168.1.3

172.18.1.0/24

192.108.1.4

172.26.4.0730

Q26. The exhibit shows a topology with 1 Gbps interfaces between routers, and four RSVP LSPs operating with the respective bandwidth reservations.
Which path will be selected for a new LSP from R4 to R6 with a bandwidth reservation of 400 Mbps?

R4 -> R1 -> R2 -> R5 -> R6

R4 -> R5 -> R6

R4 -> R5 -> R2 -> R3 -> R6

R4 -> R1 -> R2 -> R3 -> R6

Q27. Referring to the exhibit, which two statements are correct? (Choose two.)

Prefixes in Level 1 will be redistributed to Level 2.

Prefixes In Level 2 will be not redistributed to Level 1.

Prefixes in Level 2 will be redistributed to Level 1.

Prefixes in Level 1 will not be redistributed to Level 2.

Q28. Which two statements are correct about the BGP MED attribute? (Choose two.)

BGP uses the MED value when peering to two or more connections to the same upstream AS

BGP routes require the MED attribute be defined

BGP uses the MED value when peering to two different upstream ASs

BGP assumes the MED value to be 0, if not already defined

Q29. What are three ways to configure IPv6 addresses in your network? (Choose three.)

Statically configure your IPv6 addresses.

Configure your IPv6 addresses using stateless auto configuration.

Configure your IPv6 addresses by setting up a DHCPv6 server.

Configure your IPv6 addresses by assigning your router a prefix list.

Configure your IPv6 addresses by configuring support for unicast-arp-negotiation.

Q30. What are three well-known mandatory BGP attributes? (Choose three.)

next hop

origin

community

MED

AS path

Q31. Click the Exhibit.

By default, at which router will the implicit null (Label3) action take place for LSP shown in the exhibit?

Q32. Exhibit button

Which two statements are correct about the service provider MPLS network shown in the exhibit? (Choose two.)

R3 will perform a label pop operation on the transport MPLS label.

Traffic from Network 1 to Network 3 and traffic from Network 1 to Network 4 each need their own unique label-switched path.

Traffic from Network 1 to Network 3 and from Network 1 to Network 4 can share the same label-switched path.

R3 will perform a label swap operation on the transport MPLS label.

Q33. Click the Exhibit button.

Both configuration hierarchies shown in the exhibit have been committed to your MX Series device.
Which two statements are true in this scenario? (Choose two.)

Traffic destined to 10.3.0.1 will use the R1-to-R6 LSP as a next hop

Traffic destined to 10.3.0.1 will not use the R1-to-R6 LSP as a next hop

The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 5

The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 7

Pass Your Juniper Exam with JN0-363 Exam Dumps (Updated 265 Questions) [Q19-Q33]

Juniper JN0-363 Exam Syllabus Topics: