This page was exported from Free Exams Dumps Materials [ http://exams.dumpsmaterials.com ] Export date:Thu Nov 21 12:16:35 2024 / +0000 GMT ___________________________________________________ Title: Ace DES-DD23 Certification with 56 Actual Questions [Q11-Q28] --------------------------------------------------- Ace DES-DD23 Certification with 56 Actual Questions PASS EMC DES-DD23 EXAM WITH UPDATED DUMPS NO.11 Which command is used to check if NFS is enabled?  nfs enable  nfs status  nfs show clients  system show NO.12 What is a requirement to use the PowerProtect DD HA feature?  Each head unit requires its own FS25 shelf  Head units and nodes require an active/active configuration  A single set of shared storage  Dual set of shared storage configuration NO.13 A PowerProtect DD appliance with two expansion shelves is being installed in a customer-provided rack. When cabling the controller to the shelves, what is connected to the host port on the last shelf in the chain?  Expansion port of the upstream shelf  Host port of the controller  Expansion port of the controller  Host port of the downstream shelf NO.14 What rule must be followed during an upgrade procedure with the FS25 expansion shelf?  FS25 shelf is cabled on a separate private chain  For high performance, the connections from a controller to FS25 shelves must be over FC cables  FS25 shelf must be on the same chain with DS60  If ES40 SAS shelves are on the same chain as an FS25, the maximum number of shelves on that chain is five NO.15 An engineer is deploying two PowerProtect DD6900 systems in an HA pair. The installation includes ES40, DS60, and FS25 expansion shelves.What consideration should be made when cabling the hardware?  The FS25 shelf must be fully populated  The FS25 shelf should be cabled on a separate chain  The DS60 shelf should be cabled on a separate chain  The DS60 shelf must be populated with identical drives NO.16 A customer needs to use DD Retention Lock Compliance to ensure that data integrity is maintained. Which PowerProtect DD systems meet the customer’s requirement?  DD3300, DD6900, and DD9400  DDVE, DD3300, and DD6900  DD6900, DDVE, and DD9400  DD9400, DDVE, and DD9900 NO.17 A backup administrator needs to implement BoostFS for Windows. What do they need to install on the Windows server?  NFS  FUSE  CIFS  CBFS NO.18 A technician is upgrading a DD9400 with a DS60 expansion shelf with 60 drives. In the GUI interface, only 30 drives are accessible.What is causing these drives to be inaccessible?  There are not enough cache drives on the DD9400 to support the extra capacity.  A second SAS connection from DD9400 to DS60 is not activated.  There are not enough spare drives.  The capacity license applied is only for 30 drives. The DS60 ships with 60 drives installed. Depending on the capacity license applied to the PowerProtect DD system either 15, 30, 45, or 60 drives will be accessibleNO.19 What are some possible network bottlenecks for a PowerProtect DD?  Configuration, wire speeds, switches and routers  Connectivity, routing protocols, and configuration  Connectivity, firewalls, and routing protocols  Routing protocols, switches and routers, and wire speeds NO.20 What are the steps to configure the Retention Lock Compliance? Reference:https://datastorageasean.com/sites/default/files/EMC-data-domain-retention-lock-wp.pdfNO.21 What can be used to monitor system utilization?  Health tab in the System Manager GUI  system show performance command  Alert Messages  system status command NO.22 What are some possible network bottlenecks for a PowerProtect DD?  Configuration, wire speeds, switches and routers  Connectivity, routing protocols, and configuration  Connectivity, firewalls, and routing protocols  Routing protocols, switches and routers, and wire speeds Some possible bottlenecks are:1- Clients* Disk Issues* Configuration* Connectivity2- Network* Wire speeds* Switches and routers* Routing protocols and firewalls3- Backup Server* Configuration* Load* Connectivity4- Data Domain System* Connectivity* Configuration* Log level set too highNO.23 Refer to the exhibit.Match each action to its call-out location. NO.24 When using CIFS from a PowerProtect DD system, what should be changed on a Windows machine?  SMBTimeout to 7200 seconds  CIFSTimeout to 3600 seconds  SESSTIMEOUT to 7200 seconds  SESSTIMEOUT to 3600 seconds NO.25 Refer to the exhibit.Match each action to its call-out location. NO.26 When using the DD VTL Tape Out to Cloud feature, which status will a tape show once it is in the cloud tier vault?  Offsite  Offline  Archived  Vaulted Once in the cloud tier vault, the backup server maintains the tape status to be “Offsite.”NO.27 A customer needs a backup system to protect 100 TB of mission-critical dat a. What should be used to back up the system?  cloud tier  DD6900  DD3300  DDVE NO.28 An administrator is scaling Cloud Tier for a DD9400 by adding a second cloud unit. What is the required amount of metadata storage (TB)?  120  240  300  500  Loading … DES-DD23 Questions PDF [2023] Use Valid New dump to Clear Exam: https://www.dumpsmaterials.com/DES-DD23-real-torrent.html --------------------------------------------------- Images: https://exams.dumpsmaterials.com/wp-content/plugins/watu/loading.gif https://exams.dumpsmaterials.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2023-06-26 12:52:56 Post date GMT: 2023-06-26 12:52:56 Post modified date: 2023-06-26 12:52:56 Post modified date GMT: 2023-06-26 12:52:56