NO.163 You are troubleshooting HPE ProLiant servers for a customer. The customer has granted you read-only access to HPE OneView. You need to download the audit log from OneView.
Which permission level should the customer give you?

NO.164 Match each HPE solution to its corresponding technology usage.

NO.165 A solution integrator is installing new equipment to the rack.
Click the recommended location for HPE R/T3000 Extended Runtime Module.
Hot Area:

NO.166 A customer needs to locate an exact time when a link down event occurred at the FC port of Nimble storage Which on-premises tool can the customer use?

NO.167 A local state college is implementing a new VDI cluster to support computer and testing labs. They have the following requirements:
Three VMware ESXi Hosts, each with one AMD processor, 1 TB of RAM, 16 Gbps FC Dual Port HBA.
HPE Nimble AF20 with 17 TB usable capacity.
Integration into an existing HPE FlexFabric 5710 and HPE SN3000B Fibre Channel SAN switches.
The solution must fit in 7U of rack space. If the customer needs more capacity in the future, they will use scale-out growth.
Which server model should you recommend to this client?

NO.168 You need to create a dynamic bridge-aggregation group on a FlexFabric switch to ensure the ports are automatically configured with the applicable bridge-aggregation interface configuration Drag the steps on the left Into their appropriate order in the answer area on the right.

NO.169 A server administrator needs to see the 24-hour history of the power consumed by an installed HPE ProLiant server.
Which HPE tool can the admin use to gather this information?

NO.170 A customer needs NFS access on a fiber channel array.
What must be included in the solution to meet this requirement?

NO.171 A customer needs a shared storage solution for a virtualization platform that will host a database application.
The customer is considering an HPE Nimble array.
Which feature would lead you to propose an HPE Nimble AF40 over an HPE 3PAR All Flash array?

NO.172 You configured a port on an HPE FiexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs interface Ten-GigabitEthernet 1/0/11 description server ESXiOl-ethl port link-type trunk port trunk permit vlan 50 port trunk permit vlan 2 port trunk pvid vlan 50 Given the configuration above, what should happen to any untagged traffic coming from the VMware ESXI host?

NO.173 A customer requires five HPE ProLiant servers that will be mounted in a rack and shipped from site to site All servers must be online within an hour of site arrival Which feature will ensure that the servers win be available to the business if travel motion has damaged a DIMM?

NO.174 A customer needs a low cost block storage array for targeted workloads. The array needs to provide automated tiering, thin provisioning, and snapshot capabilities.
Which HPE storage solution meets the customer requirements?

NO.175 A customer is planning an upgrade to their network. They need to combine multiple existing switches into one virtual device.
Which technology should the customer configure on their existing switches?

NO.176 Place the components on the left in the correct order on the right for the recommended power-up sequence.

NO.177 Match each customer data center architecture to its network topology.

NO.178 You are configuring an MSA 2052 for one of your customers in OCA.
Click on either one of the two places on the Bill of Materials screen that will enable you to verify the configuration and get details on any errors.

NO.179 A customer needs a virtual desktop infrastructure environment to quickly deploy new desktop images to more than 70 onsite contractors. They plan to use HPE ProLiant DL360 Gen10 servers running VMware ESXi connected to a shared storage device. The customer requires deduplication because they are concerned about the required storage capacity for the full clone images.
Which storage device would best address their concerns?

NO.180 Match the speed and protocol with the appropriate component.

NO.181 A customer needs a solution for a rack of servers. They need connectivity for 14 HPE DL380 servers, which each have two 10-GBASE-T Ethernet ports, and 10 HPE DL360 servers, which have two 10GBASE-X SFP+ Ethernet ports.
They need switch redundancy for each server and want to connect all servers to the same switch stack. The client also needs a 400 Gb backbone connection to the data center core switch from the solution you are creating.
Which architecture meets the customer requirements?

NO.182 Match each workload profile description with the corresponding profile. (Select all that apply.)

NO.183 Match the speed and protocol with the appropriate component.

NO.184 A customer is considering an upgrade of their network, which connects 10 servers. The customer has a converged data center networking architecture with Layer 2 and Layer 3 functionality. Which HPE product family will meet this customer’s needs?

NO.185 Refer to the exhibits.


A customer is growing rapidly, and they need to add as many drives as possible to their MSA 2052 array. You created the original configuration. How many drives can be added to the customer array? (Select two)