Printable & Easy to Use H35-481_V2.0 Dumps 100% Same Q&A In Your Real Exam [Q11-Q33] : Free Exams Dumps Materials : http://exams.dumpsmaterials.com

This page was exported from Free Exams Dumps Materials [ http://exams.dumpsmaterials.com ]
Export date: Thu Nov 21 14:24:05 2024 / +0000 GMT

Printable & Easy to Use H35-481_V2.0 Dumps 100% Same Q&A In Your Real Exam [Q11-Q33]

Printable & Easy to Use H35-481_V2.0 Dumps 100% Same Q&A In Your Real Exam

H35-481_V2.0 Practice Test Give You First Time Success with 100% Money Back Guarantee!

Huawei H35-481_V2.0 (HCIP-5G-RAN V2.0) Certification Exam is designed to test the knowledge and skills of professionals in the field of 5G Radio Access Network (RAN). HCIP-5G-RAN V2.0 certification exam is the second version of the HCIP-5G-RAN exam and covers the latest 5G RAN technologies and concepts. It is essential for professionals who wish to demonstrate their expertise in planning, designing, deploying, and optimizing 5G RAN networks.

NO.11 5G can enable smart manufacturing and upgrade the manufacturing business model. Which of the following are smart manufacturing scenarios empowered by 5G?

Real-time operation guidance for industrial AR

Collaborative control between machines

Machine vision positioning & detection

Precise positioning and transportation

NO.12 Which of the following X2 Interconnection solutions are supported by LTE and NR base stations?

Interconnection through RF modules

Interconnection through the a

Interconnected through the backplane in co-BBU separate-MPT scenarios

Interconnection through traditional IP RAN

NO.13 Which of the following are the topologies between a BBU and RF units?

Chain topology

Tree topology

Ring topology

Star topology

NO.14 What does it mean when the RUN indicator of anAAU is blinking green (on for is and off for Is)?

There is power supply, but the board is faulty.

The board is working properly.

Software is being loaded to the board, or the board is not started.

There is no power supply, or the board is faulty.

NO.15 Which of the following may cause exceptions In the GPS clock source?

High signal attenuation is caused due to improper GPS remote distance.

The antenna feeder between the base station and the GPS is faulty, for example, the cable is disconnected.

The GPS is not installed in the correct position, and the number of locked satellites is less than 4.

The GPS satellite card Is faulty.

NO.16 How many OM channels does a gNodeB support at most?

NO.17 Which of the following are possible causes of NRDUCELL unavailability? (Choose All that Apply)

RF fault

BBP fault

Insufficient CPRI bandwidth

Clock exception

NO.18 Which of the following statements about NR subcarriers are incorrect?

The larger the subcarrier spacing, the larger the number of symbols.

The smaller the subcarrier spacing, the larger the CP length and the more suitable it becomes for wide coverage.

The smaller the subcarrier spacing, the lower the power spectral density.

The larger the subcarrier spacing, the larger the slot length.

NO.19 Which of the following may cause exceptions In the GPS clock source?

High signal attenuation is caused due to improper GPS remote distance.

The antenna feeder between the base station and the GPS is faulty, for example, the cable is disconnected.

The GPS is not installed in the correct position, and the number of locked satellites is less than 4.

The GPS satellite card Is faulty.

NO.20 In NSA networking, which of the following objects are unnecessary to configrued for a gNodeB in SI self-setup scenarios?

USERPLANEHOST

USERPLANEPEER

SCTPPEER

SCTPHOST

NO.21 Which of the following statements about a self-contained slot is Incorrect?

Faster downlink hybrid automatic repeat request (HARQ) feedback and UL data scheduling to reduce the RTT.

Increased GP overhead due to frequent uplink-downlink switching.

High requirements on latency of terminal hardware processing.

Prolonged sounding reference signal (SRS) transmission period to track fast channel changes and Improve MIMO performance.

NO.22 Unlike 4G base stations, 5G base stations do not need to be configured with tracking area Information.

True

False

NO.23 Which of the following 5G technologies can be used to ensure the QoS and security of smart grid services? (Choose One)

5G super uplink

5G E2E slicing

5G carrier aggregation

5G DNN private line

NO.24 If the NRDUCELL corresponding to NRCELL Is not set up, the NRCELL must be unavailable.

True

False

NO.25 One of the challenges of 5G network construction is to provide Indoor coverage in large stadiums, where Indoor interference severely affects network coverage and capacity. Which of the following solutions can effectively mitigate the interference caused by Indoor coverage with high-density site deployment?

High-power RRUs

Massive MIMO AAU

Multi-sector cell

Sector splitting

NO.26 If the subcarrier spacing (SCS) of a low-frequency cell Is 30 kHz and the bandwidth of each RB Is 360 kHz, theoretically, what value should the noise (dBm) over the air interface be?

-105

-116

-120

-97

NO.27 The ESN of a gNodeB changes after the main control board Is replaced.

True

False

NO.28 One of the challenges of 5G network construction is to provide Indoor coverage in large stadiums, where Indoor interference severely affects network coverage and capacity. Which of the following solutions can effectively mitigate the interference caused by Indoor coverage with high-density site deployment?

High-power RRUs

Massive MIMO AAU

Multi-sector cell

Sector splitting

NO.29 Which of the following methods is recommended for modifying the cell bandwidths across the entire network during gNodeB data reconfiguration?

MAE-Deployment (radio network planning data file)

MAE-Deployment (batch reconfiguration)

MML

MAE-Deployment (batch reconfiguration + radio network planning data file)

NO.30 In SA networking, incorrect TAC configurations will cause UE access to fail.

True

False

NO.31 Which of the following slots retains the same physical position on both the BBU5900 and BBU3910?

SIot6

SIot2

Slot7

Slot1

NO.32 Which of the following synchronization rasters can be used by a UE during a cell search?

17.28MHz

1200kHz

1.44MHz

100kHz

NO.33 Which of the following is required when the binding relationship between an NR cell and sector equipment is inconsistent with the planned one?

Adding or deleting an RF module

Adding an NR TDD cell

Adjusting the association relationship between the NR cell and RF module

Replacing the CPRI port connected to an RF module

To prepare for the Huawei HCIP-5G-RAN V2.0 certification exam, candidates can take advantage of various training resources, such as online courses, training materials, and practice exams. Huawei also provides a range of certification paths for professionals looking to advance their careers in 5G, including the HCIA-5G, HCIP-5G-Core, and HCIP-5G-RAN certifications.

Fully Updated Free Actual Huawei H35-481_V2.0 Exam Questions: https://www.dumpsmaterials.com/H35-481_V2.0-real-torrent.html

Post date: 2023-08-13 09:10:19
Post date GMT: 2023-08-13 09:10:19
Post modified date: 2023-08-13 09:10:19
Post modified date GMT: 2023-08-13 09:10:19