VALID C_IBP_2208 Exam Dumps For Certification Exam Preparation [Q21-Q45]

August 18, 2023August 18, 2023 examdumpsVALID C_IBP_2208 Exam Dumps For Certification Exam Preparation [Q21-Q45] 0 Comment

Tags: C_IBP_2208 certification cost, C_IBP_2208 exam dumps demo, C_IBP_2208 test syllabus, C_IBP_2208 valid test dumps

4.3/5 - (3 votes)

VALID C_IBP_2208 Exam Dumps For Certification Exam Preparation

C_IBP_2208 Dumps PDF 2023 Strategy Your Preparation Efficiently

To become certified in SAP IBP for Supply Chain, you must pass the SAP C_IBP_2208 certification exam. C_IBP_2208 exam is a comprehensive test of your knowledge of the solution and is designed to ensure that you have a thorough understanding of the key concepts, functionalities, and features of SAP IBP. C_IBP_2208 exam is comprised of multiple-choice questions and is timed, so you will need to be well-prepared and comfortable with the material before taking the exam.

To become a Certified Application Associate in SAP IBP for Supply Chain, candidates must pass the C-IBP-2208 exam with a minimum score of 68%. C_IBP_2208 exam consists of 80 multiple-choice questions that are based on the content of the course materials and practical experience with SAP IBP. Candidates have 180 minutes to complete the exam, and the questions are presented in English. Upon successful completion of the exam, candidates will receive a certificate from SAP that verifies their expertise in SAP IBP for Supply Chain. Certified Application Associate – SAP IBP for Supply Chain certification is valid for three years, after which candidates must recertify to maintain their status as a Certified Application Associate.

QUESTION 21
You are adding a value-based filter to a planning view.Which of the following conditions apply?Note: There are 3 correct answers to this question.

You can only apply one value-based filter per planning view.

The alerts dashboard is not available if a value-based filter is set for the open planning view.

You can add (or delete) planning objects to a planning view after these filters are applied.

These filters can be used together with attribute totals in the same planning view.

These filters are always applied based on the values stored in the database.

QUESTION 22
Which of the following approaches could you take to reduce run times of an optimizer?Note: There are 3 correct answers to this question.

Increase the use of incremental lot size beyond the frozen horizon.

Use non-overlapping networks by using subnetwork ID maintained at Location-Products to reduce the size of the problem.

Avoid using telescopic time buckets.

Keep the number of fairshare segments small.

Split into multiple planning areas to support weekly vs. daily planning needs.

QUESTION 23
What are the outputs of the Calculate Target Inventory Components Operator?Note: There are 3 correct answers to this question.

Target Cycle Stock

Recommended Safety Stock

Component Usage

Reorder Point

Target Pipeline Stock

QUESTION 24
You create a planning filter using an SAP IBP Fiori app.Which of the following objects can it be applied to?Note: There are 2 correct answers to this question.

Supply chain graph in Supply Chain Network app

Jobs in the Applications Jobs app

Planning view templates in the SAP IBP add-in for Microsoft Excel

Snapshot operator in the SAP IBP add-in for Microsoft Excel

QUESTION 25
The S&OP Operator Profiles app is used to configure different types of algorithms.Which algorithm-specific settings are unique for only the Time Series-based Supply Optimizer?Note: There are 2 correct answers to this question.

Time profile level

Discretization

Processing mode

Global cost factors

QUESTION 26
What are the S&OP operator (optimizer) parameters associated with demand fair share?

Number of fair share segments Additional tiering costs (default) Number of fair share segments late delivery

Number of fair share segments Additional tiering costs (default) Inventory days of supply

Number of fair share segments Maximum days of coverage Number of fair share segments late delivery

Number of fair share segments Additional tiering costs (default) Maximum inventory

QUESTION 27
Which of the following key functions are supported by SAP IBP for sales and operations?Note: There are 2 correct answers to this question.

Time series analysis

Simple statistical forecast

Scenario analysis for operational supply planning

Multi-Level Supply Planning Heuristics

QUESTION 28
Which parts of the S&OP high-level process would the Inventory planning and optimization process fit into?Note: There are 2 correct answers to this question.

Management business Review, by providing the inventory targets for endorsement

Demand Review, by using the output of demand planning as input into calculations

Supply Review, by providing an input to supply network planning

Reconciliation Review, by providing inventory parameters for one consolidated plan

QUESTION 29
Which functional capabilities are included in SAP IBP for response and supply?Note: There are 2 correct answers to this question.

Gating Factors

Planning with Product Allocations

Analyze Supply Usage

Detailed Production Scheduling

QUESTION 30
You are invited to review a problem with a customer’s SAP IBP Excel template performance.What areas with the biggest potential performance impact would you focus on?Note: There are 2 correct answers to this question.

Excessive SAP IBP formatting in the Microsoft Excel UI

Number of local members and complexity of calculations

Complex calculation graphs for key figures

Number of analytics charts displaying key figures’ values

QUESTION 31
How can the SAP IBP scenario modeling functionality support business users in the S&OP planning cycle?Note: There are 2 correct answers to this question.

Simulate heuristics run in Supply Review stage

Simulate statistical forecast at the Demand Review stage

Simulate demand sensing inputs for Supply Review

Model inventory turns based on Target Safety stocks

QUESTION 32
You need to use your resource cost effectively with a certain minimum use, even if it means producing more than demand.Which solutions would apply to this scenario?Note: There are 2 correct answers to this question.

Capacity leveling will be possible for production and storage resources.

Balance can be achieved between excessive prebuild and minimum use by incorporating violation costs.

Excess stock can be generated and will need to be staged in an overflow warehouse.

Minimum capacity utilization will result in pull production occurring.

QUESTION 33
Which of the following are examples of time-independent key figures?Note: There are 2 correct answers to this question.

A special key figure marked as an aggregate key figure (aggregate constraint)

A currency conversion key figure, such as exchange rate

A unit of measure key figure, such as UOMCONVERSIONFACTOR

A forecast metric key figure, such FCSTMAPE

QUESTION 34
Which of the following are features of lag-based snapshots?Note: There are 2 correct answers to this question.

Target key figures for these snapshots must have lag as a root attribute in its base planning level.

The number of lag-based snapshots are limited to nine levels.

Lag-based snapshots are created in the Configuration app for a fixed time range.

Target key figures for these snapshots are exposed to the user in planning views.

QUESTION 35
What do you need to be aware of when using multiple pairs of key figures in one copy operator? Note: There are 2 correct answers to this question.

Copying multiple key figures can be processed sequentially.

If necessary source key figures values are disaggregated.

Copying multiple key figures on different planning levels is not possible.

If necessary target key figures values are disaggregated.

QUESTION 36
What are the possible ways that an attribute intended for use as an attribute as a key figure can be created and assigned?

Created as type NVARCHAR and assigned to an external master data type

Created as type INTEGER and assigned to a compound master data type

Created as type INTEGER and assigned to a simple master data type

Created as type DECIMAL and assigned to a compound master data type

QUESTION 37
Which constraints are taken into account by the Time-Series-Based Supply Planning Heuristic (Infinite)?Note: There are 3 correct answers to this question.

Transportation lead times

Maximum lot size

Minimum lot size

Adjusted transport receipts

Aggregated constraints

QUESTION 38
You are developing the functionality and appearance of the Excel UI for SAP IBP business users.Which extensibility capabilities for SAP IBP, add-in for Microsoft Excel are provided by Custom VBA coding?Note: There are 2 correct answers to this question.

Changing the member names

Changing the layout of the master data workbooks

Changing the entries from the Name Manager

SAP IBP ribbon extension

QUESTION 39
You are working with inventory key figures.What are some of the business scenarios where you can use the Last Period Aggregation function?Note: There are 2 correct answers to this question.

Calculating the value of inventory on any time profile level ensuring flexibility of calculation

Calculating how many periods inventory is going to last based on the planned demand

Search for and return the last not null value of the inventory key figure

Calculating the value of inventory on a weekly basis, using static aggregation from the daily level

QUESTION 40
You want to maintain key figure values for a new attribute and value combination, using SAP IBP, Add-in for Microsoft Excel, and are receiving an error related to missing combinations.How can you resolve this problem?Note: There are 2 correct answers to this question.

Use the Data Integration app to load suitable data that creates the combinations

Use the Check Mode operator to create the combinations

Use the option New Planning Object in the SAP IBP, add-in for Microsoft Excel

Use the Manage Master Data app to create the combinations

QUESTION 41
What function would you use to configure a year-to-date calculation?

Rolling Aggregation

Last Period Aggregation

Cumulative Aggregation

Dynamic Rolling Aggregation

QUESTION 42
Which applications are present in the sample model SAPIBP1?Note: There are 3 correct answers to this question.

Demand Driven Replenishment

Response Planning

Sales and Operations Planning

Inventory Optimization

Demand Sensing

QUESTION 43
Which SAP IBP planning operator can be run to delete planning objects in a certain version?

Purge Key Figure Data

Purge Key Figure Data Outside Planning Area Planning Horizon

Purge Non-Confirming Data

Purge Master Data

QUESTION 44
For your project, you create a new planning area and consider how to create analytics and alerts for it.How can you create these objects?

Use the option for copying analytics and alerts into the new planning area from the existing custom planning area.

Create analytics and alerts in the new planning area from scratch using the Intelligent Visibility application.

Use the option for copying analytics and alerts when creating a new planning area from the sample SAPIBP1.

Merge analytics and alerts into a new planning area from any sample planning area.

QUESTION 45
Which of the following are inputs to Demand Sensing with Gradient Boosting (Full) algorithm?Note: There are 2 correct answers to this question.

Sales Order Quantities (both historical and future open orders)

Forecast Error CV Calculated by Manage Forecast Error Calculations app

Future Consensus Forecasts and Lagged Forecast Snapshots

Recommended Safety Stocks from Multistage Inventory Optimization

Loading …