This page was exported from Free Exams Dumps Materials [ http://exams.dumpsmaterials.com ] Export date:Thu Nov 21 11:30:19 2024 / +0000 GMT ___________________________________________________ Title: 2023 New Training Course 300-510 Tutorial Preparation Guide [Q26-Q40] --------------------------------------------------- 2023 New Training Course 300-510 Tutorial Preparation Guide Dumps of 300-510 Cover all the requirements of the Real Exam Cisco 300-510 exam covers a wide range of topics related to advanced routing solutions, including OSPF, BGP, MPLS, VPNs, and QoS. Candidates are expected to be familiar with the latest industry trends and best practices for designing, implementing, and troubleshooting complex network solutions. Cisco 300-510 Exam Syllabus Topics: TopicDetailsTopic 1BGP Additional And Backup Path Static Ipv6-In-Ipv4 Tunnels Ipv6 Provider Edge (6PE)Topic 2Topology-Independent Loop-Free Alternate (TI-LFA) Routing Protocol Extensions (OSPF, IS-IS, BGP)Topic 3Semantics Of Policy Applications And Statements Describe Conditional MatchingTopic 4Automated Steering And Coloring PCE-Based Path Calculation Control Plane Operations Data Plane OperationsTopic 5Troubleshoot Route Manipulation For BGP Hierarchical And Parameterized StructuresTopic 6Implement PIM-SM Operations Describe Multicast Concepts Compare Multicast ConceptsTopic 7Multicast Source Discovery Protocol (MSDP) Operations Intra-Domain Versus Inter-Domain Multicast RoutingTopic 8BGP Attributes And Communities Prefix Lists And Prefix Sets Auto-RP, Pimv2 BSR, Anycast RPTopic 9Principles And Operations Of PIM-SM Multicast Domains, Distribution Trees, And IGMP Operations   NO.26 Refer to the exhibit.There is a connectivity issue between Customer-1 and Customer-2 File servers between the customers cannot send critical data R3 routes are missing from the routing table on the Customer-1 router All interlaces on Customer-1 are up Which configuration must be applied to router R2 to correct the problem?  Option A  Option B  Option C  Option D NO.27 Refer to the exhibit.Refer to the exhibit. Customer A is a small media company with two offices connected by a 512 Kbps line. Their NY office is connected to several external partners by static routes on router R3. VoIP services use VoIP codec G729 Users reported poor voice quality and slow data transfer between the offices A network engineer configured ip tcp header-compression iphc-format on R2 and R3 routers Which additional action must the engineer take to fix the issue?  Configure the ip ospf I area O command under Serial 1/1 interfaces on R2 and R3 to avoid routing loops  Change the OSPF router ID on either router so that the router IDs are unique.  Configure the summary-address 10.10.0.0 255.255.240.0 command on R3 to optimize OSPF communication  Configure the BGP routing protocol between R2 and R3 to control route propagation. NO.28 An engineer is troubleshooting a connectivity issue across the MPLS network and is verifying the forwarding behavior of packets. Which table does the engineer look at to verify the forwarding behavior of an IP packet as it enters the MPLS network at the ingress LSR?  LFIB  LIB  RIB  FIB NO.29 What Is a characteristic of a segment routing mapping server?  It must be placed in the core of the network.  It serves multiple VRFs.  It must have an IGP adjacency.  It applies SID mappings from one IGP instance to another IGP instance. NO.30 Refer to the exhibit. While configuring router 2 with all the default values, a network engineer cannot see any route received in router 1. How should the engineer solve the issue?  Set up a priority different than 0 in the interface.  Modify the router ID to be the interface IP on the serial.  Modify the IP address or mask of the interface to a valid one.  Set the network type in S1/0 to point-to-point. NO.31 You have configured MSDP peering between two autonomous systems that pass traffic between two sites, but the peering has failed to come up.Which task do you perform to begin troubleshooting the problem?  Verify that multicast has been disabled globally  Verify that PIM-DM is configured on the source interface  Verify that both source interfaces are reachable from both peers  Verify that the two MSDP peers allow asymmetric routing NO.32 Refer to the exhibitRouter R1 is configured to advertise outgoing SA messages to routers R2 and R3, but to receive incoming SA messages only from R2. Which additional configuration must an engineer apply to router R1 so it filters all MSDP SA messages from Domain-C?  R1# ip msdp sa-filter in 192.168.3.1  R3# ip msdp sa-filter out 192.168.3.1  R3# ip msdp password peer 192.168.1.1  R1# ip msdp password peer 192.168.3.1 NO.33 Refer to the exhibit.VPN users that are connected to PE routers are facing network issues. Traffic that originates from CE1 drops before reaching CE2. An engineer finds no outgoing traffic statistics on PE1 and PE2 routers toward CE devices and finds that the PE1 router is running the older software image. Which action must be implemented to resolve the issues?  Enable LDP protocol on PE1 and PE2 routers.  Advertise P1 router loopback on PE1 in OSPF.  Enable CEF-based forwarding on PE1 router.  Advertise PE2 router loopback on PE1 in OSPF. NO.34 Refer to the exhibit.Refer to the exhibit. A network engineer is investigating a report of packet drops between the branch site and the central site.The two sites are connected via OSPF and RSVP-TE tunnels.Traffic from the central site to the branch site is passing normally.Technicians at both sites successfully ping the loopback IP addresses on routers R1 and R2.Which configuration corrects the packet-drop problem?  Option A  Option B  Option C  Option D NO.35 Refer to the exhibit.Refer to the exhibit. An engineer working for a private telecommunication company with an employee id 4115 46 881 is enabling a segment routing solution with these requirements.A service provider is using the default range for prefix SID.PE1 must allocate the first SID from the default range for the loopback address PE1 and PE2 loopback SID allocation should have a minimum difference of 500.Which configuration must be implemented to meet the requirements?  Option A  Option B  Option C  Option D NO.36 Refer to the exhibit. Router 1 is connected to router 2 on interface TenGigE0/1.Which interface provides the alternate path to 172.16.200.9/32 when the link between router 1 and router 2 goes down?  TenGigE0/1 interface provides the alternate path  A backup path must be statically installed  TenGigE0/2 interface provides the alternate path  A primary path must be manually installed NO.37 Refer to the exhibit.CE1 and CE2 cannot communicate through the service provider BGP peering is established between PE1 and PE2. IS-IS is the only routing protocol running in the service provider core.Whatstep can be done to troubleshoot the issue?  Switch the IGPs running in the core from IS-IS to OSPF to support a Cisco MPLS TE tunnel from PE1 to PE2.  Configure BGP between CE and PE routers.  Confirm that IS-IS is running with metric-style narrow.  Verify the MPLS LSPs. NO.38 Refer to the exhibit.Refer to the exhibit. R21 is a multicast source sending multicast traffic 224.1.1.1 to R23, with RP22 serving as the rendezvous point inside AS65222. A network engineer noticed that when R21 goes down, R12 in AS65111 starts to send the same multicast group 224.1.1.1 through RP11. Which action resolves the issue ?  Block service groups 224.0.1.39 and 224.0.1.40 between the two autonomous systems  Disable PIM parse mode between RP11 and RP22 in the two autonomous systems.  Advertise RP2 with a high local preference in AS65222.  Enable passive intertaoe under EIGRP between the two autonomous systems. NO.39 Refer to the exhibit.An engineer is addressing an IS-IS design issue which is running within the topology. All links are running on FastEthernet, except the link between R5 and R4, which is Gigabit Ethernet. Which statement about the design is true?  R4 prefer to reach R5 using R1 as the next hop  All links have equal cost if the default metric is used  R5 prefers to use R4 as the next hop for all routes  R1 prefer to use R5 as the next hop to reach R4 NO.40 Refer to the exhibit.A network engineer implemented this segment routing configuration. Which statement about the output is true?  This range conflicts with the segment routing local block range.  The device must be reloaded for these ranges to be allocated and used.  The default segment routing global block range is being used on this device.  A nondefault segment routing global block range is being used on this device.  Loading … Cisco 300-510 certification exam is designed for those candidates who are looking forward to exploring their knowledge and practical experience in implementing Cisco service provider advanced routing solutions. Implementing Cisco Service Provider Advanced Routing Solutions certification exam helps IT professionals acquire knowledge and expertise in various advanced routing technologies and protocols, and it provides knowledge about the latest technologies in the networking world.   Sample Questions of 300-510 Dumps With 100% Exam Passing Guarantee: https://www.dumpsmaterials.com/300-510-real-torrent.html --------------------------------------------------- Images: https://exams.dumpsmaterials.com/wp-content/plugins/watu/loading.gif https://exams.dumpsmaterials.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2023-12-01 13:04:04 Post date GMT: 2023-12-01 13:04:04 Post modified date: 2023-12-01 13:04:04 Post modified date GMT: 2023-12-01 13:04:04