This page was exported from Free Exams Dumps Materials [ http://exams.dumpsmaterials.com ] Export date:Sat Dec 21 11:56:50 2024 / +0000 GMT ___________________________________________________ Title: 2024 Updated HP HPE6-A72 Dumps PDF - Want To Pass HPE6-A72 Fast [Q47-Q68] --------------------------------------------------- 2024 Updated HP HPE6-A72 Dumps PDF - Want To Pass HPE6-A72 Fast HPE6-A72 Practice Exam Dumps - 99% Marks In HP Exam Understanding functional and technical aspects of Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam Design for Stacking The following will be discussed in HP HPE6-A72 exam dumps: Stacking AdvantagesControl, Management, and Data PlanesVertical Switching Framework specificationsIntro to Stacking technologyVertical Switching FrameworkDescribe and design HPE StoreServ integration with StoreOnce (RMC-V/RMC-X/Veeam)Categorized Data Plane and Shared Link AggregationVertical Switching Framework LinkCentralized authority and administration planeDescribe how HPE storage solutions perform workload-balancing, creating a private, highly-available, intelligent storage cloudVertical Switching Framework ArrangementVirtual System Extension Introduction   NO.47 Refer to the exhibit.The above output is the result of issuing the command show system resource-utilization.What command should be used to enable terminal output line by line or page by page?  The command page  The command terminal length 30  The command more  The command less NO.48 Which statement is true regarding modern switching requirements?  Most older legacy switches had high port bandwidth utilization and were future proof designed to meet today’s power-over-Ethernet needs.  Requirements for PoE are normally addressed using AC to DC power adapters. Concerns for port security for IoT devices are usually addressed using default wired encryption that all 802.3 Ethernet switches provide.  While APs are common, most clients are still docked and only require traditional wired connections with only the occasional dedicated PoE switch to provide power for the low number of devices needed.  Clients tend to prefer wireless connections, raising the need for PoE port access. There is also a growing amount of IoT devices that require security and port authentication options. NO.49 Match each description to the correct term. NO.50 What are two primary concerns regarding layer two loops in a redundant topology? (Choose two.)  routing loops  costs associated with upgrading from copper to fiber  multiple frame copies leading to instability of the MAC address table  security issues with a redundant loop indicating to hackers that a back-door exists  broadcast storms NO.51 SW1(config)# interface 1/1/1-1/1/2SW1(config-if-<1/1/1-1/1/2)# vlan access 2SW1(config-if-<1/1/1-1/1/2)# exitSW1(config)# interface 1/1/11-1/1/17SW1(config-if-<1/1/11-1/1/17)# vlan access 17SW1(config-if-<1/1/11-1/1/17)# exitAfter completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?  Option A  Option B  Option C  Option D NO.52 What command will save your configuration on an Aruba AOS-CX switch so that your changes automatically load on next reboot?  copy running-config checkpoint startup-config  copy startup-config running-config  copy running-config initial-checkpoint  copy running-config default NO.53 What are two methods for remotely managing an Aruba AOS-CX switch? (Choose two.)  SNMPv2c  HTTPS  USB-C console  Telnet  SSH NO.54 ServiceOS login: adminSVOS> passwordEnter password: ********Confirm password: ********The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above.What is the default password that is required for the admin account while under the Service OS console?  No password is set for this account.  “password”  “forgetme!”  The same login password that has lost originally. NO.55 Match each network protocol to the correct server listening port. Not all answers will be used. NO.56 Match the switching term to the correct definition. NO.57 Refer to the exhibitWhat is true regarding VLAN 50 according to the diagram above?  VLAN 50 is part of a switched virtual interface (SVI) that was never routed causing it to be down.  Since VLAN 50 has not been assigned to any enabled physical port, the status is down.  VLAN 50 is assigned only to Trunk ports which is why no ports are listed under interfaces.  VLAN 50 was never added to the vlan-database and therefore is in a down state. NO.58 Refer to the exhibit.What commands will successfully enable the SVI for vlan 100 on interface 1/1/1 to produce the results displayed in the command show ip interface brief in the exhibit below?  Access-1(config)# interface 1/1/1Access-1(config-if)# routingAccess-1(config-if)# interface vlan 100Access-1(config-if-vlan)# ip address 10.1.1.1/24  Access-1(config)# interface 1/1/1Access-1(config-if)# vlan trunk permit vlan 100Access-1(config-if)# interface vlan 100Access-1(config-if-vlan)# ip address static 10.1.1.1/24  Access-1(config)# interface vlan 100Access-1(config-if-vlan)# ip address 10.1.1.1/24  Access-1(config-if)# vlan 100Access-1(config-vlan)# ip address 10.1.1.1/24 NO.59 Refer to the exhibit.Which command produces the above output?  show interface port 1/1/10 trunk  show vlan port 1/1/10  show trunk port 1/1/10 extended  show interface port 1/1/10 switchport NO.60 Which two types of routes can be found in the IP routing table of an Aruba AOS-CX switch? (Choose two.)  Local  EIGRP  BGP  ISIS  RIPng NO.61 Refer to the exhibit.All four switches in the diagram have been configured with the region name “Aruba1”.What two other MSTP configurations must match for switches within the same MST region? (Choose two.)  MST region type  MST Bridge ID  MST version number  MST revision number  MST VLAN to instance mapping NO.62 Which port or ports should be allowed through a firewall so that an AOS-CX switch can act as an SNMP Agent?  UDP 1812 and UDP 1813  UDP 161  TCP 443  UDP 162 NO.63 Which two statements are true regarding Checkpoints on Aruba switches? (Choose two.)  Rolling back to a prior checkpoint triggers a reboot of the switch.  Stacking switches using VSF or VSX will disable the Checkpoint feature.  A checkpoint is a snapshot of the running-configuration and relevant metadata at the time the checkpoint was created.  System-generated checkpoints are created after a configuration change and 5 minutes of inactivity.  Checkpoints are available on AOS 5400R switches, as well as on all AOS-CX switches. NO.64 What are the benefits of a 3-Tier design over a 2-Tier? (Choose two.)  Offloading processing from the Core without routing at the Access layer.  Can use lower speed links between Core to Aggregation and Aggregation to Access given the use of an Aggregation layer.  Lowering the cost of a deployment due to needing less switches overall.  Better scalability in a campus with a large number of buildings.  Gaining the flexibility to connect the Data-Center to any Access layer switch. NO.65 The following command is issued:Switch# checkpoint rollback startWhat is the result?  The command will fail because rollback commands must be issued from global-config mode.  The switch will revert the running-configuration to the checkpoint called ‘start1 without a reboot.  The command will fail because it is incomplete.  The switch will use the checkpoint ‘rollback1 as the starting configuration on next reboot. NO.66 Refer to the exhibit.Using the static IP address configured above, what is the converted binary value of the third octet assigned to the local interface?  11010101  10110001  01001011  11111000 NO.67 Match each description to the correct term. NO.68 What are the commands to disable SSH and HTTPS services from the default VRF?  Core-1(config)# no ssh serverCore-1(config)# no https-server  Core-1# no ssh server vrf defaultCore-1# no https-server vrf default  Core-1(config)# no ssh server enableCore-1(config)# no https-server enable  Core-1(config)# no ssh server vrf defaultCore-1(config)# no https-server vrf default  Loading … HPE6-A72 certification exam is a computer-based test that consists of 60 multiple-choice questions. Candidates have 90 minutes to complete the exam, and a passing score of 70% is required to earn the certification. HPE6-A72 exam is available in multiple languages, including English, Japanese, Simplified Chinese, and Spanish. HPE6-A72 certification exam is a computer-based test that consists of 60 multiple-choice questions. Candidates are given 90 minutes to complete the exam, and a passing score of 70% or higher is required to earn the certification. HPE6-A72 exam covers a broad range of topics, including network fundamentals, VLANs, spanning tree protocols, and wireless LANs.   Updated Verified HPE6-A72 Q&As - Pass Guarantee: https://www.dumpsmaterials.com/HPE6-A72-real-torrent.html --------------------------------------------------- Images: https://exams.dumpsmaterials.com/wp-content/plugins/watu/loading.gif https://exams.dumpsmaterials.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2024-03-11 14:27:20 Post date GMT: 2024-03-11 14:27:20 Post modified date: 2024-03-11 14:27:20 Post modified date GMT: 2024-03-11 14:27:20