[Mar-2024] Download Real Juniper JN0-363 Exam Dumps Test Engine Exam Questions [Q170-Q188] : Free Exams Dumps Materials : http://exams.dumpsmaterials.com

NO.170 Click the Exhibit.

Referring to the configuration shown in the exhibit, which statement is true?

Traffic destined to address 192.168.5.1 will take next-hop 172.16.1.2.

Traffic destined to address 192.168.5.1 will alternate between next-hops 172.16.1.2 and 172.16.1.3

Traffic destined to address 192.168.5.1 will take next-hop 10.0.1.1.

Traffic destined to address 192.168.5.1 will take next-hop 172.16.1.3.

NO.171 What are three well-known mandatory BGP attributes? (Choose three.)

next hop

origin

community

MED

AS path

NO.172 Click the Exhibit button.

All devices in the network are configured correctly and the path requirements are valid.
Referring to the exhibit, which two statements are correct? (Choose two.)

The primary LSP will be signaled, and its state will be up.

The secondary LSP will not be signaled, and its state will be down.

The secondary LSP will be signaled, and its state will be up.

The primary LSP will not be signaled, and its state will be down.

NO.173 When would you use the qualified-next-hop statement with a static route?

You can use it to install the static route into different routing tables.

You can use it to send unwanted traffic to a null route.

You can use it to specify multiple next hops with different preferences.

You can use it to resolve the next hop if the next hop is not directly connected.

NO.174 Click the Exhibit button. From the output shown in the exhibit, what would happen to a packet destined for address 172.29.3.5?

The address is not in the aggregate range; the packet is sent to the Routing Engine.

The address is in the aggregate range; the packet will be silently dropped.

The address is not in the aggregate range; the packet will be forwarded.

The address is in the aggregate range; the packet will be dropped.

NO.175 Which configuration selling prohibits a static route from being redistributed by a dynamic routing protocol?

route-filter

no-readvertise

qualified-next-hop

passive

NO.176 You are asked to configure an LSP which uses the OSPF link state database for path computations. Which two statements are correct in this scenario? (Choose two.)

You must use the no-cspf parameter in the label-switched-path configuration.

Traffic engineering extensions ate enabled by default In OSPF.

Traffic engineering extensions are not enabled by default in OSPF.

You must use the policing parameter in the label-switched-path configuration.

NO.177 The IPv6 Neighbor Discovery Protocol (NDP) performs the same function as which two IPv4 protocols? (Choose two.)

ICMP

ARP

DNS

DHCP

NO.178 Click the Exhibit button. Referring to the exhibit, what must be true of the vlan_100 bridge domain?

vlan_100 has at least one Ethernet interface assigned to it.

vlan_100 does not have an Ethernet interface assigned to it.

vlan_100 might have an active Ethernet interface assigned to it.

vlan_100 does not have an active Ethernet interface assigned to it.

NO.179 An OSPF router does not have a router ID configured. In this scenario, which statement is correct about the router ID?

The Junos OS will use the IP address assigned to the interface with the lowest MAC address.

A router ID will not be assigned until it is manually configured.

The Junos OS will use the IP address assigned to the loopback interface for the router ID.

The Junos OS will use the IP address assigned to the Interface with the highest priority.

NO.180 You have been asked to provision a service provider’s network to accommodate Layer 3 VPNs as defined in RFC 4364.Which three tasks must be performed before the provider network is ready to carry VPN traffic? (Choose three.)

All Juniper Networks PE routers must be configured with an appropriate router-ID unique to the VPN.

All Juniper Networks PE routers must be configured with an appropriate route-target unique to the VPN.

All Juniper Networks PE routers must be configured with a routing-instance of type forwarding.

All Juniper Networks PE routers must be configured with a routing-instance of type vrf.

All Juniper Networks PE routers must be configured with a routing-instance containing the CE- facing interface.

NO.181 What are two methods for decreasing the size of an OSPF link-state database (LSDB)? (Choose two.)

Ensure that all routers on a shared segment are configured with a priority value of 0.

Use an interface type of p2p when possible.

Segment large groups of routers into areas.

Change a stub area to NSSA when possible.

NO.182 Which two high availability features preserve interface and kernel information during reconvergence? (Choose two.)

graceful restart (GR)

nonstop bridging (NSB)

nonstop active routing (NSR)

graceful Routing Engine switchover (GRES)

NO.183 Which statement is true about routing instances on Junos devices?

Routing information cannot be shared between routing instance.

Each routing protocol runs in a separate routing instance.

Junos device support only one routing instance.

Each routing instance is a unique grouping of routing tables, interfaces, and routing protocol parameters.

NO.184 What happens when a packet matches a static route with the next hop parameter set to reject?

The system silently drops the packet

An ICMP message is sent to the source and the packet is forwarded

An ICMP message is sent to the source and the packet is dropped

The packet is forwarded and the packet is marked as rejected in the header

NO.185 Exhibit

You confirm that the R2 and R3 routers are receiving a BGP route to the 203.0.113.0/24 network, but both routers display the route as hidden. Referring to the exhibit, which two actions solve this problem? (Choose two.)

Apply the routing policy on R1 as an import policy to the IBGP group.

Configure a routing policy on R1 that sets the next hop for the 203 0.113.0/24 BGP route to the IP address that R1 uses for IBGP peering.

Configure a routing policy on R1 that sets the next hop for the 203.0.113.0/24 BGP route to the IP address that R1 uses for EBGP peering.

Apply the routing policy on R1 as an export policy to the IBGP group.

NO.186 Exhibit

Which two statements ate correct about the information shown in the exhibit? (Choose two.)

The root bridge is reachable using the ge-0/0/14 interface.

This switch is the root bridge for this spanning tree topology.

This switch has a bridge priority of 8k.

The root bridge’s priority Is 4k.

NO.187 By default, which three criteria are used by the Junos load-balancing algorithm to determine a traffic flow? (Choose three.)

protocol

source port

destination port

source address

destination address

NO.188 Click the Exhibit button. Referring to the exhibit, what must be true of the vlan_100 bridge domain?

vlan_100 has at least one Ethernet interface assigned to it.

vlan_100 does not have an Ethernet interface assigned to it.

vlan_100 might have an active Ethernet interface assigned to it.

vlan_100 does not have an active Ethernet interface assigned to it.