[Q21-Q42] DumpsMaterials NSE7_EFW-7.2 Real Exam Question Answers Updated [Apr 28, 2024] : Free Exams Dumps Materials : http://exams.dumpsmaterials.com

This page was exported from Free Exams Dumps Materials [ http://exams.dumpsmaterials.com ]
Export date: Thu Nov 21 15:38:22 2024 / +0000 GMT

[Q21-Q42] DumpsMaterials NSE7_EFW-7.2 Real Exam Question Answers Updated [Apr 28, 2024]

DumpsMaterials NSE7_EFW-7.2 Real Exam Question Answers Updated [Apr 28, 2024]

Easily To Pass New Fortinet NSE7_EFW-7.2 Dumps with 50 Questions

NO.21 Which two statements about metadata variables are true? (Choose two.)

You create them on FortiGate

They apply only to non-firewall objects.

The metadata format is $<metadata_variabie_name>.

They can be used as variables in scripts

NO.22 Which two statements about the Security fabric are true? (Choose two.)

FortiGate uses the FortiTelemetry protocol to communicate with FortiAnatyzer.

Only the root FortiGate sends logs to FortiAnalyzer

Only FortiGate devices with configuration-sync receive and synchronize global CMDB objects that the toot FortiGate sends

Only the root FortiGate collects network topology information and forwards it to FortiAnalyzer

NO.23 After enabling IPS you receive feedback about traffic being dropped.
What could be the reason?

Np-accel-mode is set to enable

Traffic-submit is set to disable

IPS is configured to monitor

Fail-open is set to disable

NO.24 Refer to the exhibits, which show the configurations of two address objects from the same FortiGate.

Why can you modify the Engineering address object, but not the Finance address object?

You have read-only access.

FortiGate joined the Security Fabric and the Finance address object was configured on the root FortiGate.

FortiGate is registered on FortiManager.

Another user is editing the Finance address object in workspace mode.

NO.25 Exhibit.

Refer to the exhibit, which shows information about an OSPF interlace
What two conclusions can you draw from this command output? (Choose two.)

The port3 network has more man one OSPF router

The OSPF routers are in the area ID of 0.0.0.1.

The interfaces of the OSPF routers match the MTU value that is configured as 1500.

NGFW-1 is the designated router

NO.26 Refer to the exhibit, which shows an ADVPN network.

Which VPN phase 1 parameters must you configure on the hub for the ADVPN feature to function? (Choose two.)

set auto-discovery-forwarder enable

set add-route enable

set auto-discovery-receiver enable

set auto-discovery-sender enable

NO.27 Which FortiGate in a Security I auric sends togs to FortiAnalyzer?

Only the root FortiGate.

Each FortiGate in the Security fabric.

The FortiGate devices performing network address translation (NAT) or unified threat management (UTM). if configured.

Only the last FortiGate that handled a session in the Security Fabric

NO.28 Which statement about network processor (NP) offloading is true?

For TCP traffic FortiGate CPU offloads the first packets of SYN/ACK and ACK of the three-way handshake to NP

The NP provides IPS signature matching

You can disable the NP for each firewall policy using the command np-acceleration st to loose.

The NP checks the session key or IPSec SA

NO.29 You created a VPN community using VPN Manager on FortiManager. You also added gateways to the VPN community. Now you are trying to create firewall policies to permit traffic over the tunnel however, the VPN interfaces do not appear as available options.

Create interface mappings for the IPsec VPN interfaces before you use them in a policy.

Refresh the device status using the Device Manager so that FortiGate populates the IPSec interfaces

Configure the phase 1 settings in the VPN community that you didnt initially configure. FortiGate automatically generates the interfaces after you configure the required settings

install the VPN community and gateway configuration on the fortiGate devices so that the VPN interfaces appear on the Policy Objects on fortiManager.

NO.30 Exhibit.

Refer to the exhibit, which provides information on BGP neighbors.
Which can you conclude from this command output?

The router are in the number to match the remote peer.

You must change the AS number to match the remote peer.

BGP is attempting to establish a TCP connection with the BGP peer.

The bfd configuration to set to enable.

NO.31 Exhibit.

Refer to the exhibit, which contains an ADVPN network diagram and a partial BGP con figuration Which two parameters Should you configure in config neighbor range? (Choose two.)

set prefix 172.16.1.0 255.255.255.0

set route reflector-client enable

set neighbor-group advpn

set prefix 10.1.0 255.255.255.0

NO.32 Refer to the exhibit, which shows a network diagram.

Which protocol should you use to configure the FortiGate cluster?

FGCP in active-passive mode

OFGSP

VRRP

FGCP in active-active mode

NO.33 Exhibit.

Refer to exhibit, which shows a central management configuration
Which server will FortiGate choose for web filler rating requests if 10.0.1.240 is experiencing an outage?

Public FortiGuard servers

10.0.1.242

10.0.1.244

10.0.1.243

NO.34 An administrator has configured two fortiGate devices for an HA cluster. While testing HA failover, the administrator notices that some of the switches in the network continue to send traffic to the former primary device What can the administrator do to fix this problem?

Verify that the speed and duplex settings match between me FortiGate interfaces and the connected switch ports

Configure set link -failed signal enable under-config system ha on both Cluster members

Configure remote Iink monitoring to detect an issue in the forwarding path

Configure set send-garp-on-failover enables under config system ha on both cluster members

NO.35 Exhibit.

Refer to the exhibit, which contains a partial VPN configuration.
What can you conclude from this configuration1?

FortiGate creates separate virtual interfaces for each dial up client.

The VPN should use the dynamic routing protocol to exchange routing information Through the tunnels.

Dead peer detection s disabled.

The routing table shows a single IPSec virtual interface.

NO.36 Winch two statements about ADVPN are true? (Choose two)

auto-discovery receiver must be set to enable on the Spokes.

Spoke to-spoke traffic never goes through the hub

lt supports NAI for on-demand tunnels

Routing is configured by enabling add-advpn-route

NO.37 Exhibit.

Refer to the exhibit, which shows a partial touting table
What two concisions can you draw from the corresponding FortiGate configuration? (Choose two.)

IPSec Tunnel aggregation is configured

net-device is enabled in the tunnel IPSec phase 1 configuration

OSPI is configured to run over IPSec.

add-route is disabled in the tunnel IPSec phase 1 configuration.

NO.38 Which two statements about the BFD parameter in BGP are true? (Choose two.)

It allows failure detection in less than one second.

The two routers must be connected to the same subnet.

It is supported for neighbors over multiple hops.

It detects only two-way failures.

NO.39 You want to block access to the website ww.eicar.org using a custom IPS signature.
Which custom IPS signature should you configure?

NO.40 Which two statements about IKE version 2 fragmentation are true? (Choose two.)

Only some IKE version 2 packets are considered fragmentable.

The reassembly timeout default value is 30 seconds.

It is performed at the IP layer.

The maximum number of IKE version 2 fragments is 128.

NO.41 After enabling IPS you receive feedback about traffic being dropped.
What could be the reason?

Np-accel-mode is set to enable

Traffic-submit is set to disable

IPS is configured to monitor

Fail-open is set to disable

NO.42 Refer to the exhibit, which shows a network diagram.

Which IPsec phase 2 configuration should you impalement so that only one remote site is connected at any time?

Set route-overlap to allow.

Set single-source to enable

Set route-overlap to either use-new or use-old

Set net-device to enable

Latest NSE7_EFW-7.2 Study Guides 2024 - With Test Engine PDF: https://www.dumpsmaterials.com/NSE7_EFW-7.2-real-torrent.html

Post date: 2024-04-28 14:03:52
Post date GMT: 2024-04-28 14:03:52
Post modified date: 2024-04-28 14:03:52
Post modified date GMT: 2024-04-28 14:03:52