This page was exported from Free Exams Dumps Materials [ http://exams.dumpsmaterials.com ] Export date:Sun Dec 22 5:57:07 2024 / +0000 GMT ___________________________________________________ Title: [Q21-Q37] DumpsMaterials NSE6_FWF-6.4 Real Exam Question Answers Updated [May 20, 2024] --------------------------------------------------- DumpsMaterials NSE6_FWF-6.4 Real Exam Question Answers Updated [May 20, 2024] Easily To Pass New Fortinet NSE6_FWF-6.4 Dumps with 37 Questions Fortinet NSE6_FWF-6.4 exam is a challenging certification exam that requires a strong understanding of wireless security and networking concepts, as well as hands-on experience with Fortinet wireless solutions. IT professionals who are interested in pursuing this certification should have at least two years of experience working with Fortinet technologies and should be familiar with the Fortinet Security Fabric.   NEW QUESTION 21Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)  A VAP configured for captive portal authentication  A VAP configured for WPA2 or 3 Enterprise  A VAP configured to authenticate locally on FortiGate  A VAP configured to authenticate using a radius server In the SSID choose WPA2-Enterprise authentication.WSSO is RADIUS-based authentication that passes the user’s user group memberships to the FortiGate.NEW QUESTION 22As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?  Create wireless LAN specific policies  Preauthorize APs  Create a custom AP profile  Set the wireless controller country setting ExplanationSetting the wireless controller country setting is a standard best practice that should be performed before configuring FortiAPs using a FortiGate wireless controller. The country setting determines the regulatory domain and the allowed channels and power levels for the wireless network. The country setting must match the physical location of the FortiAPs to comply with local regulations and avoid interference issues.References: Secure Wireless LAN Course Description, page 5; FortiOS 6.4.0 Handbook – Wireless Controller, page 24.NEW QUESTION 23When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)  When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.  When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.  When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.  When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit. ExplanationAccording to the web search results, Auto TX Power control is a feature that allows the AP to automatically adjust its transmission power based on the RF environment. The goal is to minimize interference and optimize coverage cells for roaming. When the AP detects any other wireless signal stronger than -70 dBm, it means that there is a potential source of interference nearby, so it will reduce its transmission power until it reaches the minimum configured TX power limit. This will reduce the interference and improve coexistence with other devices. When the AP detects any interference from a trusted neighboring AP stronger than -70 dBm, it means that there is a high density of APs in the area, so it will also reduce its transmission power until it reaches the minimum configured TX power limit. This will balance the load and avoid overlapping coverage areas.References: AP Transmit Power and Enable Power Reduction with Auto TX, Transmit Power and Antenna Configuration, Meraki Auto RF: Wi-Fi Channel and Power ManagementNEW QUESTION 24Refer to the exhibits.Exhibit AExhibit BThe exhibits show the diagnose debug log of a station connection taken on the controller CLI.Which security mode is used by the wireless connection?  WPA2 Enterprise  WPA3 Enterprise  WPA2 Personal and radius MAC filtering  Open, with radius MAC filtering Best security option is WPA2-AES.NEW QUESTION 25Which statement describes FortiPresence location map functionality?  Provides real-time insight into user movements  Provides real-time insight into user purchase activity  Provides real-time insight into user usage stats  Provides real-time insight into user online activity Explanation(Page 88 Study Guide) “FortiPresence provides data and analytics based on demographic segmentation and visitor movement between areas” According to the web search results, FortiPresence location map functionality provides real-time insight into user movements. It uses the location data from the Fortinet access points to detect each visitor’s smartphone Wi-Fi signal and track their location and behavior within the site. It also provides data visualization in a customizable format, such as heat maps and animated flows, to show the visitor traffic and movement patterns.This geographical data analysis can help improve visitor experiences and business outcomes.References: Location Analytics | FortiPresence 22.4.0 – Fortinet Documentation, FortiPresence Data SheetNEW QUESTION 26Refer to the exhibit.What does the asterisk (*) symbol beside the channel mean?  Indicates channels that can be used only when Radio Resource Provisioning is enabled  Indicates channels that cannot be used because of regulatory channel restrictions  Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)  Indicates channels that are subject to dynamic frequency selection (DFS) regulations NEW QUESTION 27A tunnel mode wireless network is configured on a FortiGate wireless controller.Which task must be completed before the wireless network can be used?  The wireless network interface must be assigned a Layer 3 address  Security Fabric and HTTPS must be enabled on the wireless network interface  The wireless network to Internet firewall policy must be configured  The new network must be manually assigned to a FortiAP profile. ExplanationA FortiGate unit is an industry leading enterprise firewall. In addition to consolidating all the functions of a network firewall, IPS, anti-malware, VPN, WAN optimization, Web filtering, and application control in a single platform, FortiGate also has an integrated Wi-Fi controller.NEW QUESTION 28Which factor is the best indicator of wireless client connection quality?  Downstream link rate, the connection rate for the AP to the client  The receive signal strength (RSS) of the client at the AP  Upstream link rate, the connection rate for the client to the AP  The channel utilization of the channel the client is using NEW QUESTION 29As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?  Configure the APs individually by overriding the settings in Managed FortiAPs  Configure the controller for the correct country code for Germany  Clone a suitable FortiAP profile and change the county code settings on the profile  Create a new FortiAP profile and change the county code settings on the profile NEW QUESTION 30You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.Which configuration change will allow neighboring APs to be successfully detected?  Enable Locate WiFi clients when not connected in the relevant AP profiles.  Enable Monitor channel utilization on the relevant AP profiles.  Ensure that all allowed channels are enabled for the AP radios.  Enable Radio resource provisioning on the relevant AP profiles. ExplanationThe ARRP (Automatic Radio Resource Provisioning) profile improves upon DARRP (Distributed Automatic Radio Resource Provisioning) by allowing more factors to be considered to optimize channel selection among FortiAPs. DARRP uses the neighbor APs channels and signal strength collected from the background scan for channel selection.NEW QUESTION 31Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?  SQL services must be running  Two wireless APs must be sending data  DTLS encryption on wireless traffic must be turned off  Wireless network security must be set to open Explanationhttps://docs.fortinet.com/document/fortipresence-vm/1.2.0/administration-guide/546812/introductionNEW QUESTION 32A tunnel mode wireless network is configured on a FortiGate wireless controller.Which task must be completed before the wireless network can be used?  The wireless network interface must be assigned a Layer 3 address  Security Fabric and HTTPS must be enabled on the wireless network interface  The wireless network to Internet firewall policy must be configured  The new network must be manually assigned to a FortiAP profile. A FortiGate unit is an industry leading enterprise firewall. In addition to consolidating all the functions of a network firewall, IPS, anti-malware, VPN, WAN optimization, Web filtering, and application control in a single platform, FortiGate also has an integrated Wi-Fi controller.NEW QUESTION 33As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?  Configure the APs individually by overriding the settings in Managed FortiAPs  Configure the controller for the correct country code for Germany  Clone a suitable FortiAP profile and change the county code settings on the profile  Create a new FortiAP profile and change the county code settings on the profile ExplanationThe correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs is to create a new FortiAP profile and change the country code settings on the profile. This is because the country code settings determine the legal RF channels and transmission power limits for each country, and they are applied at the FortiAP profile level. By creating a new FortiAP profile for the remote APs, you can specify the correct country code for Germany and assign it to the APs. This will ensure that the APs comply with the local regulations and avoid interference with other devices. Configuring the APs individually by overriding the settings in Managed FortiAPs is not recommended, as it is tedious and error-prone. Configuring the controller for the correct country code for Germany is not possible, as the controller can only have one country code setting, which should match its physical location. Cloning a suitable FortiAP profile and changing the county code settings on the profile is not advisable, as it may cause conflicts with other settings that are specific to the original profile. References: Secure Wireless LAN course description, [FortiOS 6.4.0 Handbook – Wireless Controller]NEW QUESTION 34You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.Which configuration change will allow neighboring APs to be successfully detected?  Enable Locate WiFi clients when not connected in the relevant AP profiles.  Enable Monitor channel utilization on the relevant AP profiles.  Ensure that all allowed channels are enabled for the AP radios.  Enable Radio resource provisioning on the relevant AP profiles. The ARRP (Automatic Radio Resource Provisioning) profile improves upon DARRP (Distributed Automatic Radio Resource Provisioning) by allowing more factors to be considered to optimize channel selection among FortiAPs. DARRP uses the neighbor APs channels and signal strength collected from the background scan for channel selection.NEW QUESTION 35What type of design model does FortiPlanner use in wireless design project?  Architectural model  Predictive model  Analytical model  Integration model NEW QUESTION 36When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)  An X.509 certificate to authenticate the client  An X.509 to authenticate the authentication server  A WPA2 or WPA3 personal wireless network  A WPA2 or WPA3 Enterprise wireless network  509 certificates and work for connections that use Secure Socket Layer/Transport Level Security (SSL/TLS). Both client and server certificates have additional requirements. NEW QUESTION 37What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?  DHCP  Static  Broadcast  Multicast  Loading … Latest NSE6_FWF-6.4 Study Guides 2024 - With Test Engine PDF: https://www.dumpsmaterials.com/NSE6_FWF-6.4-real-torrent.html --------------------------------------------------- Images: https://exams.dumpsmaterials.com/wp-content/plugins/watu/loading.gif https://exams.dumpsmaterials.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2024-05-20 10:41:23 Post date GMT: 2024-05-20 10:41:23 Post modified date: 2024-05-20 10:41:23 Post modified date GMT: 2024-05-20 10:41:23