Jul-2024 ISTQB-CTFL Study Material, Preparation Guide and PDF Download [Q85-Q101] : Free Exams Dumps Materials : http://exams.dumpsmaterials.com

NEW QUESTION 85
4 equivalence classes are given for integer values:
0 < x <100
100<= x <= 200
200 < x < 500
x >= 500
Which of the following options represent correct set of data for valid equivalence class partitions?

50; 100; 200. 1000

0. 1.99, 100.200,201.499, 500;

0.50; 100; 150.200.350.500;

50; 100; 250; 1000

NEW QUESTION 86
A test engineer finds a defect while testing. After the developer has fixed the defect, the test engineer decides to re-run a complete section of the tests. Which of the following is correct?

The lest engineer should not re-run the tests, as they have already been run, and results recorded.

The test engineer should not re-run the tests, they should be part of the developer tests.

The test engineer should re-run the tests, in order to ensure that new defects have not been introduced by the fix.

The test engineer should re-run the tests, because the defect shows that the test cases need to be updated.

NEW QUESTION 87
Why it is essential that defects found in a review be reported objectively?

In order to facilitate easy entry of detected defects in a OTS (Defect Tracking System)

In order to allow the author of reviewed work product(S) to take the feedback positively as an effort at improving the product (S) and not as a personal assault

In order to allow the review moderator to easily understand them, and assign them to the right developer for fixing

In order to allow augmentation of existing checklists used for reviewing the work product (S)

NEW QUESTION 88
Which of the following activities is NOT a pan of the fundamental testing process?

Archiving automation code

Test status reporting

Test process improvement

Build release and maintenance

NEW QUESTION 89
Which of the following should be included in a test status report?
I Estimation details
II Total number of open and closed defects
III Actual effort spent
IV Defect reports
V Number of executed, failed, blocked tests

III.V

II, III

I. II. IV

II, III.V

The following should be included in a test status report: total number of open and closed defects, actual effort spent, and number of executed, failed, and blocked tests. A test status report is a document that provides information on the results and status of testing activities for a given period or phase. A test status report should include information that is relevant, accurate, and timely for the intended audience and purpose. Some of the information that should be included in a test status report are: total number of open and closed defects, which can indicate the defect trend and defect density of the software product; actual effort spent, which can indicate the productivity and efficiency of the testing process; number of executed, failed, and blocked tests, which can indicate the test progress and test coverage of the software product. The following should not be included in a test status report: estimation details, defect reports, and impact analysis. Estimation details are not part of a test status report, but rather part of a test plan or a test estimation document. Estimation details provide information on the expected time, resources, and costs for testing activities, not on the actual results or status of testing activities. Defect reports are not part of a test status report, but rather separate documents that provide detailed information on individual defects found during testing. Defect reports include information such as defect description, defect severity, defect priority, defect status, defect resolution, etc. Defect reports can be referenced or summarized in a test status report, but not included in full. Impact analysis is not part of a test status report, but rather part of a risk assessment or prioritization process. Impact analysis provides information on the potential effects or consequences of a change or a defect on the software product or project. Impact analysis can be used to evaluate the amount or scope of testing to be performed, but not to report the results or status of testing activities. Verified Reference: A Study Guide to the ISTQB Foundation Level 2018 Syllabus – Springer, page 141.

NEW QUESTION 90
A software calculates the annual car tax using three inputs:
– E; the emission level of the vehicle
– P: the power of the vehicle
-T the type of the vehicle
The input value for P can be integer positive values between 15 and 350.
Which of the following answers contains a correct list of a boundary values for the P input?

14,351

14,15,350,351

15,350

5.175.500

NEW QUESTION 91
Which of the following statements about estimation of the test effort is WRONG?

Once the test effort is estimated, resources can be identified and a schedule can be drawn up.

Effort estimate can be inaccurate because the quality of the product under tests is not known.

Effort estimate depends on the budget of the project.

Experience based estimation is one of the estimation techniques.

* Effort estimate does not depend on the budget of the project, but rather on the scope, complexity, and quality of the software product and the testing activities1. Budget is a constraint that may affect the feasibility and accuracy of the effort estimate, but it is not a factor that determines the effort estimate. Effort estimate is the amount of work required to complete the testing activities, measured in terms of person-hours, person-days, or person-months2.
* The other options are correct because:
* A. Once the test effort is estimated, resources can be identified and a schedule can be drawn up, as they are interrelated aspects of the test planning process3. Resources are the people, tools, equipment, and facilities needed to perform the testing activities4. Schedule is the time frame and sequence of the testing activities, aligned with the project milestones and deadlines5.
* B. Effort estimate can be inaccurate because the quality of the product under tests is not known, as it affects the number and severity of the defects that may be found and the rework that may be needed to fix them6. Quality is the degree to which the software product satisfies the specified requirements and meets the needs and expectations of the users and clients7.
* D. Experience based estimation is one of the estimation techniques, which relies on the judgment and expertise of the testers and other project stakeholders to estimate the test effort based on similar projects or tasks done in the past. Experience based estimation can be useful when there is a lack of historical data, formal methods, or detailed information about the software product and the testing activities.
References =
* 1 ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 154
* 2 ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 155
* 3 ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 156
* 4 ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 157
* 5 ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 158
* 6 ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 159
* 7 ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 16
* [8] ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 160
* [9] ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 161

NEW QUESTION 92
Which of the following statements is the BEST example of non-functional testing?

Tests which capture the time it takes to save a file

Tests which calculate overtime pay for those employees entitled to such

Tests related to “what” the system should do

Tests based on the internal structure of a component or system

NEW QUESTION 93
For a mandatory input field “ZIP code” the following rules are given:
1 – The valid ZIP code format is 5 numeric digits.
2 – The code has to exist in the post office’s official ZIP code list
Using equivalence classes partitioning, how many test cases are required to test this field?

8

3

6

4

NEW QUESTION 94
Given the following requirement:
Requirement ID: 2 8
Requirement Description Additional Entrance Fee
Detailed Description
An additional fee of S3 is charged during the weekend, but
1) Visitors aged under 7 are not charged.
2) Visitors aged 7 to 13 inclusive get a 20% discount off the additional fee.
3) Visitors aged greater than 65 get a 50% discount off the additional fee.
Age should be an integer of 0 or above.
Weekend means Friday to Sunday inclusive.
Which of the following statements is NOT correct?

Thursday is a valid input boundary value.

A minimum of 6 valid test cases are derived from boundary value analysis based on input age.

$3.01 is a valid output boundary value.

7 and 13 are boundary values for the equivalence partition including age 10.

Boundary value analysis is a technique that tests boundary values between partitions of equivalent data.
Boundary values are values at the edge of an equivalence partition or at the smallest incremental distance on either side of an edge. Boundary value analysis can be applied to both input and output values. Based on the given requirement, we can identify two input values: age and weekend. Age should be an integer of 0 or above, and weekend means Friday to Sunday inclusive. The following statement is not correct:
* A) Thursday is a valid input boundary value. This statement is not correct, as Thursday is not a boundary value for the input weekend. The boundary values for the input weekend are Friday and Sunday, as they are at the edge of the equivalence partition that represents weekend days. The following statements are correct:
* B) A minimum of 6 valid test cases are derived from boundary value analysis based on input age. This statement is correct, as we can derive six valid test cases based on input age by using the minimum and maximum values for each equivalence partition defined by the requirement. The equivalence partitions
* for input age are: under 7 (0 to 6), 7 to 13 inclusive (7 to 13), and greater than 65 (66 and above). The minimum and maximum values for each partition are: 0 and 6, 7 and 13, and 66 and any value above it.
* C) $3.01 is a valid output boundary value. This statement is correct, as $3.01 is a boundary value for the output additional fee. The additional fee can have four possible values depending on the input age: $0 (for visitors aged under 7), $2.40 (for visitors aged 7 to 13 inclusive with a 20% discount), $1.50 (for visitors aged greater than 65 with a 50% discount), and $3 (for visitors aged between 14 and 65). The boundary values for the output additional fee are $0 and $3, as they are at the edge of an equivalence partition or at the smallest incremental distance on either side of an edge. Therefore, $3.01 is a valid output boundary value, as it is at the smallest incremental distance above $3.
* D) 7 and 13 are boundary values for the equivalence partition including age 10. This statement is correct, as 7 and 13 are boundary values for the equivalence partition that represents visitors aged 7 to
13 inclusive. This partition includes age 10, which is an internal value within the partition. Verified References: [A Study Guide to the ISTQB Foundation Level 2018 Syllabus – Springer], Chapter 4, page 37-38.

NEW QUESTION 95
A program is used to control a manufacturing line (turn machines on and off. start and stop conveyer belts, add raw materials to the flow. etc.). Not all actions are possible at all times. For example, there are certain manufacturing stages that cannot be stopped – unless there is an emergency. A tester attempts to evaluate if all such cases (where a specific action is not allowed) are covered by the tests.
Which coverage metric will provide the needed information for this analysis?

Code coverage

Data flow coverage

Statement coverage

Branch Coverage

Branch coverage is a type of structural coverage metric that measures the percentage of branches or decision outcomes that are executed by the test cases. A branch is a point in the code where the control flow can take two or more alternative paths based on a condition. For example, an if-else statement is a branch that can execute either the if-block or the else-block depending on the evaluation of the condition. Branch coverage ensures that each branch is taken at least once by the test cases, and thus reveals the behavior of the software under different scenarios. Branch coverage is also known as decision coverage or all-edges coverage.
Branch coverage is suitable for testing the cases where a specific action is not allowed, because it can verify that the test cases cover all the possible outcomes of the conditions that determine the action. For example, if the program has a condition that checks if the manufacturing stage can be stopped, then branch coverage can ensure that the test cases cover both the cases where the stage can be stopped and where it cannot be stopped. This way, branch coverage can help identify any missing or incorrect branches that may lead to undesired or unsafe actions.
The other options are not correct because they are not suitable for testing the cases where a specific action is not allowed. Code coverage is a general term that encompasses various types of coverage metrics, such as statement coverage, branch coverage, data flow coverage, etc. Code coverage does not specify which type of coverage metric is used for the analysis. Data flow coverage is a type of structural coverage metric that measures the percentage of data flow paths that are executed by the test cases. A data flow path is a sequence of statements that define, use, or kill a variable. Data flow coverage is useful for testing the correctness and completeness of the data manipulation in the software, but not for testing the conditions that determine the actions. Statement coverage is a type of structural coverage metric that measures the percentage of statements or lines of code that are executed by the test cases. Statement coverage ensures that each statement is executed at least once by the test cases, but it does not reveal the behavior of the software under different scenarios. Statement coverage is a weaker criterion than branch coverage, because it does not account for the branches or decision outcomes in the code. Reference = ISTQB Certified Tester Foundation Level (CTFL) v4.0 syllabus, Chapter 4: Test Techniques, Section 4.3: Structural Testing Techniques, Pages 51-54.

NEW QUESTION 96
Which of the following statements about Experience Based Techniques (EBT) is correct?

EBT use tests derived from the test engineers’ previous experience with similar technologies.

EBT is based on the ability of the test engineer to implement various testing techniques.

EBT is done as a second stage of testing, after non-experienced-based testing took place.

EBT require broad and deep knowledge in testing but not necessarily in the application or technological domain.

NEW QUESTION 97
Which of the following is an example of black-box dynamic testing?

Functional Testing

Code inspection

Checking memory leaks for a program by executing it

Coverage analysis

Functional testing is an example of black-box dynamic testing. Black-box testing (also known as specification-based testing) is a type of testing that does not consider the internal structure or implementation of the system under test, but rather its external behavior or functionality. Dynamic testing is a type of testing that involves executing the system under test with various inputs and observing its outputs. Functional testing is a type of black-box dynamic testing that verifies that the system under test performs its intended functions according to its requirements or specifications. Functional testing can be performed at various levels and scopes depending on the objectives and criteria of testing. The other options are not examples of black-box dynamic testing. Code inspection is an example of white-box static testing. White-box testing (also known as structure-based testing) is a type of testing that considers the internal structure or implementation of the system under test. Static testing is a type of testing that does not involve executing the system under test, but rather analyzing it for defects, errors, or violations of standards. Code inspection is a type of white-box static testing that involves examining the source code of the system under test for quality, readability, maintainability, etc.
Checking memory leaks for a program by executing it is an example of white-box dynamic testing. Memory leaks are defects that occur when a program fails to release memory that it has allocated but no longer needs.
Checking memory leaks for a program by executing it requires knowledge and access to the internal structure or implementation of the program, such as memory allocation and deallocation mechanisms, pointers, references, etc. Coverage analysis is an example of white-box static testing. Coverage analysis is a technique that measures how much of the code or structure of the system under test has been exercised by a test suite.
Coverage analysis requires knowledge and access to the internal structure or implementation of the system under test, such as statements, branches, paths, conditions, etc. Verified References: A Study Guide to the ISTQB Foundation Level 2018 Syllabus – Springer, page 7.

NEW QUESTION 98
Which of the following statements about independent testing is WRONG?

Independent testing is necessary because developers don’t know any testing.

Independent testing is best suited for the system test level.

A certain degree of independence makes the tester more effective at finding defects.

Independent test teams may find other types of detects than developers who are familiar with the system’s structure.

NEW QUESTION 99
You need to test the login page of a web site. The page contains fields for user name and password. Which test design techniques are most appropriate for this case?

Decision table testing, state transition testing.

Equivalence partitioning, Boundary value analysis.

Exploratory testing, statement coverage.

Decision coverage, fault attack.

Equivalence partitioning and boundary value analysis are test design techniques that are most appropriate for testing the login page of a web site. The page contains fields for user name and password, which are input values that can be divided into partitions of equivalent data. Equivalence partitioning is a technique that divides the input data and output results of a software component into partitions of equivalent data. Each partition should contain data that is treated in the same way by the component. Equivalence partitioning can be used to reduce the number of test cases by selecting one representative value from each partition. Boundary value analysis is a technique that tests boundary values between partitions of equivalent data. Boundary values are values at the edge of an equivalence partition or at the smallest incremental distance on either side of an edge. Boundary value analysis can be used to detect defects caused by incorrect handling of boundary conditions. For example, for testing the user name field, we can identify two equivalence partitions: valid user name (existing and correct) and invalid user name (non-existing or incorrect). The boundary values for these partitions are the minimum and maximum length of user name allowed by the system.
Decision table testing and state transition testing are not suitable for testing the login page of a web site, as they are more applicable for testing components that have multiple inputs and outputs that depend on logical combinations of conditions or events. Decision table testing is a technique that shows combinations of inputs and/or stimuli (causes) with their associated outputs and/or actions (effects). State transition testing is a technique that models how a system transitions from one state to another depending on events or conditions.
Exploratory testing and statement coverage are not suitable for testing the login page of a web site, as they are more applicable for testing components that require learning, creativity and intuition or structural analysis. Exploratory testing is an approach to testing that emphasizes learning, test design and test execution at the same time. Exploratory testing relies on the tester’s skills, creativity and intuition to explore the software under test and discover defects. Statement coverage is a type of structural testing that measures how many statements in a program have been executed by a test suite. Statement coverage can be used to assess the adequacy or completeness of a test suite.
Decision coverage and fault attack are not suitable for testing the login page of a web site, as they are more applicable for testing components that have complex logic or potential errors. Decision coverage is a type of structural testing that measures how many decision outcomes in a program have been executed by a test suite. Decision coverage can be used to assess the adequacy or completeness of a test suite. Fault attack is a type of functional testing that deliberately introduces faults into a system in order to provoke failures or errors. Verified Reference: [A Study Guide to the ISTQB Foundation Level 2018 Syllabus – Springer], Chapter 4, page 34-46; Chapter 5, page 47-48.

NEW QUESTION 100
Which ONE of the following statements does NOT describe how testing contributes to higher quality?

Properly designed tests that pass reduce the level of risk in a system.

The testing of software demonstrates the absence of defects.

Software testing identifies defects, which can be used to improve development activities.

Performing a review of the requirement specifications before implementing the system can enhance quality.

* The testing of software does not demonstrate the absence of defects, but rather the presence of defects or the conformance of the software to the specified requirements1. Testing can never prove that the software is defect-free, as it is impossible to test all possible scenarios, inputs, outputs, and behaviors of the software2. Testing can only provide a level of confidence in the quality of the software, based on the coverage, effectiveness, and efficiency of the testing activities3.
* The other options are correct because:
* A. Properly designed tests that pass reduce the level of risk in a system, as they verify that the system meets the expected quality attributes and satisfies the needs and expectations of the users and clients4. Risk is the potential for loss or harm due to the occurrence of an undesirable event5. Testing can help to identify, analyze, prioritize, and mitigate the risks associated with the software product and project6.
* C. Software testing identifies defects, which can be used to improve development activities, as they provide feedback on the quality of the software and the effectiveness of the development processes7. Defects are flaws or errors in the software that cause it to deviate from the expected or required results or behavior. Testing can help to detect, report, track, and resolve the defects, and prevent them from recurring in the future.
* D. Performing a review of the requirement specifications before implementing the system can enhance quality, as it can ensure that the requirements are clear, complete, consistent, testable, and aligned with the needs and expectations of the users and clients. Requirements are the specifications of what the software should do and how it should do it. Testing can help to validate that the requirements are met by the software, and verify that the software is implemented according to the requirements.
References =
* 1 ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 10
* 2 ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 11
* 3 ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 12
* 4 ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 13
* 5 ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 97
* 6 ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 98
* 7 ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 14
* [8] ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 15
* [9] ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 16
* [10] ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 17
* [11] ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 18
* [12] ISTQB Certified Tester Foundation Level Syllabus v4.0, 2023, p. 19

NEW QUESTION 101
A software company decides to invest in reviews of various types. The thought process they have is that each artifact needs to be reviewed using only one of the review methods depending on the criticality of the artifact.

The thought process is incorrect. The whole company should adopt same standard for review of all artifacts.

The thought process is correct. The whole company should decide or the review method based on their CMM level.

The thought process is incorrect. Same artifact can be reviewed using different review methods

The thought process is correct. It wastes time to review same artifact using efferent review methods