[Dec 11, 2024] FCP_FGT_AD-7.4 Practice Exam Dumps - 99% Marks In Fortinet Exam [Q26-Q45] : Free Exams Dumps Materials : http://exams.dumpsmaterials.com

This page was exported from Free Exams Dumps Materials [ http://exams.dumpsmaterials.com ]
Export date: Thu Dec 12 1:58:52 2024 / +0000 GMT

[Dec 11, 2024] FCP_FGT_AD-7.4 Practice Exam Dumps - 99% Marks In Fortinet Exam [Q26-Q45]

[Dec 11, 2024] FCP_FGT_AD-7.4 Practice Exam Dumps - 99% Marks In Fortinet Exam

Updated Verified FCP_FGT_AD-7.4 Q&As - Pass Guarantee or Full Refund

NO.26 What are two features of collector agent advanced mode? (Choose two.)

In advanced mode, FortiGate can be configured as an LDAP client and group filters can be configured on FortiGate.

Advanced mode supports nested or inherited groups.

In advanced mode, security profiles can be applied only to user groups, not individual users.

Advanced mode uses the Windows convention -NetBios: DomainUsername.

NO.27 Refer to the exhibit.

FortiGate is configured for firewall authentication. When attempting to access an external website, the user is not presented with a login prompt.
What is the most likely reason for this situation?

The Service DNS is required in the firewall policy.

The user is using an incorrect user name.

The Remote-users group is not added to the Destination.

No matching user account exists for this user.

NO.28 An administrator has configured central DNAT and virtual IPs.
Which item can be selected in the firewall policy Destination field?

An IP pool

A VIP object

A VIP group

The mapped IP address object of the VIP object

NO.29 Examine the IPS sensor and DoS policy configuration shown in the exhibit, then answer the question below.

When detecting attacks, which anomaly, signature, or filter will FortiGate evaluate first?

SMTP.Login.Brute.Force

IMAP.Login.brute.Force

ip_src_session

Location: server Protocol: SMTP

NO.30 Which statement is a characteristic of automation stitches?

They can be run only on devices in the Security Fabric.

They can be created only on downstream devices in the fabric.

They can have one or more triggers.

They can run multiple actions at the same time.

NO.31 Refer to the exhibit.

Which contains a network diagram and routing table output. The Student is unable to access Webserver.
What is the cause of the problem and what is the solution for the problem?

The first packet sent from Student failed the RPF check. This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1.

The first reply packet for Student failed the RPF check. This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1.

The first reply packet for Student failed the RPF check. This issue can be resolved by adding a static route to 203.0.114.24/32 through port3.

The first packet sent from Student failed the RPF check. This issue can be resolved by adding a static route to 203.0.114.24/32 through port3.

NO.32 Which two statements about the application control profile mode are true? (Choose two.)

It uses flow-based scanning techniques, regardless of the inspection mode used.

It cannot be used in conjunction with IPS scanning.

It can be selected in either flow-based or proxy-based firewall policy.

It can scan only unsecure protocols.

NO.33 Which three pieces of information does FortiGate use to identify the hostname of the SSL server when SSL certificate inspection is enabled? (Choose three.)

The host field in the HTTP header.

The server name indication (SNI) extension in the client hello message.

The subject alternative name (SAN) field in the server certificate.

The subject field in the server certificate.

The serial number in the server certificate.

NO.34 Refer to the exhibits, which show the system performance output and the default configuration of high memory usage thresholds in a FortiGate.

Based on the system performance output, what can be the two possible outcomes? (Choose two.)

FortiGate will start sendingall files to FortiSandbox for inspection.

FortiGate has entered conserve mode.

Administrators cannot change the configuration.

Administrators can access FortiGate onlythrough the console port.

NO.35 Refer to the exhibit.

Which statement about the configuration settings is true?

When a remote user accesses http://10.200.1.1:443, the SSL-VPN login page opens.

When a remote user accesses https://10.200.1.1:443, the SSL-VPN login page opens.

When a remote user accesses https://10.200.1.1:443, the FortiGate login page opens.

The settings are invalid. The administrator settings and the SSL-VPN settings cannot use the same port.

NO.36 Refer to the exhibit, which shows an SD-WAN zone configuration on the FortiGate GUI.

Based on the exhibit, which statement is true?

The underlay zone contains port1and

The d-wan zone contains no member.

The d-wan zone cannot be deleted.

The virtual-wan-link zone contains no member.

NO.37 Which two statements are true regarding FortiGate HA configuration synchronization? (Choose two.)

Checksums of devices are compared against each other to ensure configurations are the same.

Incremental configuration synchronization can occur only from changes made on the primary FortiGate device.

Incremental configuration synchronization can occur from changes made on any FortiGate device within the HA cluster

Checksums of devices will be different from each other because some configuration items are not synced to other HA members.

NO.38 Refer to the exhibit.

Given the interfaces shown in the exhibit, which two statements are true? (Choose two.)

Traffic between port2 and port2-vlan1 is allowed by default.

port1-vlan10 and port2-vlan10 are part of the same broadcast domain.

port1-vlan1 and port2-vlan1 can be assigned in the same VDOM or to different VDOMs.

port1 is a native VLAN.

NO.39 View the exhibit.

Both VDOMs are operating in NAT/route mode. The subnet 10.0.1.0/24 is connected to VDOM1. The subnet 10.0.2.0/24 is connected to VDOM2. There is an inter-VDOM link between VDOM1 and VDOM2.
Also, necessary firewall policies are configured in VDOM1 and VDOM2.
Which two static routes are required in the FortiGate configuration, to route traffic between both subnets through an inter-VDOM link? (Choose two.)

A static route in VDOM1 with the destination subnet matching the subnet assigned to the inter-VDOM link

A static route in VDOM2 for the destination subnet 10.0.1.0/24

A static route in VDOM1 for the destination subnet 10.0.2.0/24

A static route in VDOM2 with the destination subnet matching the subnet assigned to the inter- VDOM link

NO.40 Examine the exhibit, which shows a firewall policy configured with multiple security profiles.

Which two security profiles are handled by the IPS engine? (Choose two.)

Web Filter

IPS

AntiVirus

Application Control

NO.41 Which two features of IPsec IKEv1 authentication are supported by FortiGate? (Choose two.)

Pre-shared key and certificate signature as authentication methods

Extended authentication (XAuth)to request the remote peer to provide a username and password

Extended authentication (XAuth) for faster authentication because fewer packets are exchanged

No certificate is required on the remote peer when you set the certificate signature as the authentication method

NO.42 Refer to the exhibit.

In the network shown in the exhibit, the web client cannot connect to the HTTP web server. The administrator runs the FortiGate built-in sniffer and gets the output as shown in the exhibit.
What should the administrator do next to troubleshoot the problem?

Run a sniffer on the web server.

Capture the traffic using an external sniffer connected to port1.

Execute another sniffer in the FortiGate, this time with the filter “host 10.0.1.10”

Execute a debug flow.

NO.43 An employee needs to connect to the office through a high-latency internet connection.
Which SSL VPN setting should the administrator adjust to prevent SSL VPN negotiation failure?

SSL VPN idle-timeout

SSL VPN login-timeout

SSL VPN dtls-hello-timeout

SSL VPN session-ttl

NO.44 Which two statements about equal-cost multi-path (ECMP) configuration on FortiGate are true? (Choose two.)

If SD-WAN is enabled, you control the load balancing algorithm with the parameter load-balance-mode.

If SD-WAN is disabled, you can configure the parameter v4-ecmp-mode to volume-based.

If SD-WAN is enabled, you can configure routes with unequal distance and priority values to be part of ECMP

If SD-WAN is disabled, you configure the load balancing algorithm in config system settings.

NO.45 Refer to the exhibit, which shows a partial configuration from the remote authentication server.

Why does the FortiGate administrator need this configuration?

To authenticate only the Training user group.

To set up a RADIUS server Secret

To authenticate and match the Training OU on the RADIUS server.

To authenticate Any FortiGate user groups.

FCP_FGT_AD-7.4 Real Valid Brain Dumps With 50 Questions: https://www.dumpsmaterials.com/FCP_FGT_AD-7.4-real-torrent.html

Post date: 2024-12-11 15:41:42
Post date GMT: 2024-12-11 15:41:42
Post modified date: 2024-12-11 15:41:42
Post modified date GMT: 2024-12-11 15:41:42