This page was exported from Free Exams Dumps Materials [ http://exams.dumpsmaterials.com ] Export date:Tue Mar 4 0:39:37 2025 / +0000 GMT ___________________________________________________ Title: [Q378-Q400] Certification Training for 200-301 Exam Dumps Test Engine [2025] --------------------------------------------------- Certification Training for 200-301 Exam Dumps Test Engine [2025] Jan 31, 2025 Step by Step Guide to Prepare for 200-301 Exam Cisco 200-301 exam is a vital certification exam for any network engineer or technician who wants to advance their career in the IT industry. With its comprehensive coverage of networking topics and practical application of skills, passing 200-301 exam can open up new opportunities in the field. Furthermore, obtaining a CCNA certification is a significant achievement and can demonstrate to potential employers your commitment to the field and your ability to work with complex network infrastructure.   NO.378 Which virtual MAC address is used by VRRP group 1?  0000.5E00.0101  0500.3976.6401  0050.0c05.ad81  0007.c061.bc01 The virtual router MAC address associated with a virtual router is an IEEE 802 MAC Address in the following format:00-00-5E-00-01-{VRID} (in hex in internet standard bit-order)NO.379 Which state is bypassed in Rapid PVST+ when PortFast is enabled on a port?  blocking  forwarding  learning  discarding NO.380 Refer to the exhibit.Router R2 is configured with multiple routes to reach network 10 1.1 0/24 from router R1. What protocol is chosen by router R2 to reach the destination network 10.1 1 0/24?  eBGP  static  OSPF  EIGRP NO.381 Refer to the exhibit. Which Command do you enter so that R1 advertises the loopback0 interface to the BGP Peers?  Network 172.16.1.32 mask 255.255.255.224  Network 172.16.1.0 0.0.0.255  Network 172.16.1.32 255.255.255.224  Network 172.16.1.33 mask 255.255.255.224  Network 172.16.1.32 mask 0.0.0.31  Network 172.16.1.32 0.0.0.31 Section: IP ConnectivityNO.382 What is a recommended approach to avoid co-channel congestion while installing access points that use the2.4 GHz frequency?  different nonoverlapping channels  different overlapping channels  one overlapping channel  one nonoverlapping channel NO.383 Refer to the exhibit.What does router R1 use as its OSPF router-ID?  10.10.1.10  10.10.10.20  172.16.15.10  192.168.0.1 ExplanationOSPF uses the following criteria to select the router ID:1. Manual configuration of the router ID (via the“router-id x.x.x.x” command under OSPF router configuration mode).2. Highest IP address on a loopback interface.3. Highest IP address on a non-loopback and active (no shutdown) interface.NO.384 How does a DHCP server dynamically assign IP addresses to hosts?  Addresses are permanently assigned so that the host uses the same address at all times  Addresses are assigned for a fixed period of time. At the end of the period, a new request for an address must be made, and another address is then assigned.  Addresses are leased to hosts. A host will usually keep the same address by periodically contacting the DHCP server to renew the lease.  Addresses are allocated after a negotiation between the server and the host to determine the length of the agreement. NO.385 Which three features are added in SNMPv3 over SNMPv2?  Message Integrity  Compression  Authentication  Encryption  Error Detection NO.386 Refer to the exhibit. How does router R1 handle traffic to 192.168.10.16?  It selects the IS-IS route because it has the shortest prefix inclusive of the destination address.  It selects the EIGRP route because it has the lowest administrative distance.  It selects the OSPF route because it has the lowest cost.  It selects the RIP route because it has the longest prefix inclusive of the destination address. NO.387 Refer to the exhibit.An administrator configures four switches for local authentication using passwords that are stored in a cryptographic hash. The four switches must also support SSH access for administrators to manage the network infrastructure. Which switch is configured correctly to meet these requirements?  SW1  SW2  SW3  SW4 NO.388 Refer to the exhibit.Which switch becomes the root of a spanning tree for VLAN 20 if all li links are of equal speed?  SW1  SW2  SW3  SW4 NO.389 Refer to the exhibit.An engineer is tasked with verifying network configuration parameters on a client workstation to report back to the team lead. Drag and drop the node identifiers from the left onto the network parameters on the right. NO.390 Refer to the exhibit.An administrator must turn off the Cisco Discovery Protocol on the port configured with address last usable address in the 10.0.0.0/30 subnet. Which command set meets the requirement?  interface gi0/1no cdp enable  interface gi0/1clear cdp table  interface gi0/0no cdp advertise-v2  interface gi0/0no cdp run NO.391 Refer to the exhibit.After the election process what is the root bridge in the HQ LAN?  Switch 1  Switch 2  Switch 3  Switch 4 NO.392 Refer to the exhibit.Which configuration allows routers R14 and R86 to form an OSPFv2 adjacency while acting as a central point for exchanging OSPF information between routers?         NO.393 Which action does the router take as rt forwards a packet through the network?  The router replaces the source and desinaoon labels wth the sending router uterface label as a source and the next hop router label as a desbnabon  The router encapsulates the source and destination IP addresses with the sending router P address as the source and the neighbor IP address as the destination  The router replaces the original source and destination MAC addresses with the sending router MAC address as the source and neighbor MAC address as the destination  The router encapsulates the original packet and then includes a tag that identifies the source router MAC address and transmit transparently to the destination NO.394 Refer to the exhibit.Based on the LACP neighbor status, in which mode is the SW1 port channel configured?  passive  mode on  auto  active From the neighbor status, we notice the “Flags” are SP. “P” here means the neighbor is in Passive mode. In order to create an Etherchannel interface, the (local) SW1 ports should be in Active mode. Moreover, the “Port State” in the exhibit is “0x3c” (which equals to “00111100 in binary format). Bit 3 is “1” which means the ports are synchronizing -> the ports are working so the local ports should be in Active mode.NO.395 Three switches must be configured for Layer 2 connectivity. The company requires only the designated VLANs to be configured on their respective switches and permitted accross any links between switches for security purposes. Do not modify or delete VTP configurations.The network needs two user-defined VLANs configured:VLAN 110: MARKETINGVLAN 210: FINANCE1. Configure the VLANs on the designated switches and assign them as access ports to the interfaces connected to the PCs.2. Configure the e0/2 interfaces on Sw1 and Sw2 as 802.1q trunks with only the required VLANs permitted.3. Configure the e0/3 interfaces on Sw2 and Sw3 as 802.1q trunks with only the required VLANs permitted. See the Explanation below.Explanation:Answer as below configuration:Sw1enbaleconfig tVlan 210Name FINANCEInter e0/1Switchport access vlan 210do wrSw2Enableconfig tVlan 110Name MARKITINGInt e0/1Switchport acees vlan 110do wrSw3Enableconfig tVlan 110Name MARKITINGVlan 210Name FINANCEInt e0/0Switchport access vlan 110Int e0/1Switchport access vlan 210Sw1Int e0/1Switchport allowed vlan 210Sw2Int e0/2Switchport trunk allowed vlan 210Sw3Int e0/3Switchport trunk allowed vlan 210Switchport trunk allowed vlan 210,110NO.396 A network engineer is replacing the switches that belong to a managed-services client with new Cisco Catalyst switches. The new switches will be configured for updated security standards, including replacing Telnet services with encrypted connections and doubling the modulus size from 1024. Which two commands must the engineer configure on the new switches? (Choose two.)  crypto key generate rsa general-keys modulus 1024  transport input all  crypto key generate rsa usage-keys  crypto key generate rsa modulus 2048  transport Input ssh NO.397 Refer to the exhibit.An engineer is configuring the router to provide static NAT for the webserver Drag and drop the configuration commands from the left onto the letters that correspond to its position in the configuration on the right. NO.398 Which HSRP feature was new in HSRPv2?  VLAN group numbers that are greater than 255  Virtual MAC addresses  tracking  preemption NO.399 Refer to the exhibit.Which switch becomes the root bridge?  S1  S2  S3  S4 NO.400 An engineer needs to add an old switch back into a network. To prevent the switch from corrupting the VLAN database which action must be taken?  Add the switch in the VTP domain with a lower revision number  Add the switch with DTP set to dynamic desirable  Add the switch in the VTP domain with a higher revision number  Add the switch with DTP set to desirable  Loading … Ultimate Guide to Prepare 200-301 Certification Exam for CCNA: https://www.dumpsmaterials.com/200-301-real-torrent.html --------------------------------------------------- Images: https://exams.dumpsmaterials.com/wp-content/plugins/watu/loading.gif https://exams.dumpsmaterials.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2025-01-31 12:27:21 Post date GMT: 2025-01-31 12:27:21 Post modified date: 2025-01-31 12:27:21 Post modified date GMT: 2025-01-31 12:27:21