JN0-637 Dumps PDF New [2025] Ultimate Study Guide [Q45-Q64] : Free Exams Dumps Materials : http://exams.dumpsmaterials.com

Free Exams Dumps Materials
https://exams.dumpsmaterials.com/2025/04/08/jn0-637-dumps-pdf-new-2025-ultimate-study-guide-q45-q64/
Export date: Fri Apr 18 4:51:49 2025 / +0000 GMT

JN0-637 Dumps PDF New [2025] Ultimate Study Guide [Q45-Q64]

JN0-637 Dumps PDF New [2025] Ultimate Study Guide

JN0-637 Exam Dumps PDF Updated Dump from DumpsMaterials Guaranteed Success

Juniper JN0-637 Exam Syllabus Topics:

Topic	Details
Topic 1	Layer 2 Security: It covers Layer 2 Security concepts and requires candidates to configure or monitor related scenarios.
Topic 2	Logical Systems and Tenant Systems: This topic of the exam explores the concepts and functionalities of logical systems and tenant systems.
Topic 3	Automated Threat Mitigation: This topic covers Automated Threat Mitigation concepts and emphasizes implementing and managing threat mitigation strategies.
Topic 4	Advanced Policy-Based Routing (APBR): This topic emphasizes on advanced policy-based routing concepts and practical configuration or monitoring tasks.
Topic 5	Advanced Network Address Translation (NAT): This section evaluates networking professionals' expertise in advanced NAT functionalities and their ability to manage complex NAT scenarios.
Topic 6	Troubleshooting Security Policies and Security Zones: This topic assesses the skills of networking professionals in troubleshooting and monitoring security policies and zones using tools like logging and tracing.
Topic 7	Multinode High Availability (HA): In this topic, aspiring networking professionals get knowledge about multinode HA concepts. To pass the exam, candidates must learn to configure or monitor HA systems.

Q45. Exhibit

The exhibit shows a snippet of a security flow trace.
In this scenario, which two statements are correct? (Choose two.)

This packet arrived on interface ge-0/0/4.0.

Destination NAT occurs.

The capture is a packet from the source address 172.20.101.10 destined to 10.0.1.129.

An existing session is found in the table.

Q46. Click the Exhibit button.

Which type of NAT is shown in the exhibit?

NAT46

NAT64

persistent NAT

DS-Lite

Q47. What are two valid modes for the Juniper ATP Appliance? (Choose two.)

flow collector

event collector

all-in-one

core

Q48. Exhibit:

You have configured a CoS-based VPN that is not functioning correctly.
Referring to the exhibit, which action will solve the problem?

You must delete one forwarding class.

You must change the loss priorities of the forwarding classes to low.

You must use inet precedence instead of DSCP.

You must change the code point for the DB-data forwarding class to 10000.

Q49. You are asked to create multiple virtual routers using a single SRX Series device. You must ensure that each virtual router maintains a unique copy of the routing protocol daemon (RPD) process.
Which solution will accomplish this task?

Secure wire

Tenant system

Transparent mode

Logical system

Q50. Exhibit.

Referring to the exhibit, which two statements are true? (Choose two.)

Juniper Networks will not investigate false positives generated by this custom feed.

The custom infected hosts feed will not overwrite the Sky ATP infected host’s feed.

The custom infected hosts feed will overwrite the Sky ATP infected host’s feed.

Juniper Networks will investigate false positives generated by this custom feed.

Q51. Exhibit

Referring to the exhibit, which two statements are true? (Choose two.)

The SRX-1 device can use the Proxy__Nodes feed in another security policy.

You can use the Proxy_Nodes feed as the source-address and destination-address match criteria of another security policy on a different SRX Series device.

The SRX-1 device creates the Proxy_wodes feed, so it cannot use it in another security policy.

You can only use the Proxy_Node3 feed as the destination-address match criteria of another security policy on a different SRX Series device.

Q52. Exhibit

You are implementing filter-based forwarding to send traffic from the 172.25.0.0/24 network through ISP-
1 while sending all other traffic through your connection to ISP-2. Your ge-0/0/1 interface connects to two networks, including the 172.25.0.0/24 network. You have implemented the configuration shown in the exhibit. The traffic from the 172.25.0.0/24 network is being forwarded as expected to 172.20.0.2, however traffic from the other network (172.25.1.0/24) is not being forwarded to the upstream 172.21.0.2 neighbor.
In this scenario, which action will solve this problem?

You must specify that the 172.25.1.1/24 IP address is the primary address on the ge-0/0/1 interface.

You must apply the firewall filter to the lo0 interface when using filter-based forwarding.

You must add another term to the firewall filter to accept the traffic from the 172.25.1.0/24 network.

You must create the static default route to neighbor 172.21 0.2 under the ISP-1 routing instance hierarchy.

Q53. Referring to the exhibit,

which two statements are correct about the NAT configuration? (Choose two.)

Both the internal and the external host can initiate a session after the initial translation.

Only a specific host can initiate a session to the reflexive address after the initial session.

Any external host will be able to initiate a session to the reflexive address.

The original destination port is used for the source port for the session.

Q54. Exhibit:

You have deployed an SRX Series device as shown in the exhibit. The devices in the Local zone have recently been added, but their SRX interfaces have not been configured. You must configure the SRX to meet the following requirements:
* Devices in the 10.1.1.0/24 network can communicate with other devices in the same network but not with other networks or the SRX.
* You must be able to apply security policies to traffic flows between devices in the Local zone.
Which three configuration elements will be required as part of your configuration? (Choose three.)

set security zones security-zone Local interfaces ge-0/0/1.0

set interfaces ge-0/0/1 unit 0 family ethernet-switching vlan-members 10

set protocols l2-learning global-mode switching

set protocols l2-learning global-mode transparent-bridge

set security zones security-zone Local interfaces irb.10

Q55. Exhibit

You are implementing filter-based forwarding to send traffic from the 172.25.0.0/24 network through ISP-
1 while sending all other traffic through your connection to ISP-2. Your ge-0/0/1 interface connects to two networks, including the 172.25.0.0/24 network. You have implemented the configuration shown in the exhibit. The traffic from the 172.25.0.0/24 network is being forwarded as expected to 172.20.0.2, however traffic from the other network (172.25.1.0/24) is not being forwarded to the upstream 172.21.0.2 neighbor.
In this scenario, which action will solve this problem?

You must specify that the 172.25.1.1/24 IP address is the primary address on the ge-0/0/1 interface.

You must apply the firewall filter to the lo0 interface when using filter-based forwarding.

You must add another term to the firewall filter to accept the traffic from the 172.25.1.0/24 network.

You must create the static default route to neighbor 172.21 0.2 under the ISP-1 routing instance hierarchy.

Q56. You are deploying IPsec VPNs to securely connect several enterprise sites with ospf for dynamic routing. Some of these sites are secured by third-party devices not running Junos.
Which two statements are true for this deployment? (Choose two.)

OSPF over IPsec can be used for intersite dynamic routing.

Sites with overlapping address spaces can be supported.

OSPF over GRE over IPsec is required to enable intersite dynamic routing

Sites with overlapping address spaces cannot be supported.

Q57. You are asked to set up advanced policy-based routing.
Which type of routing instance is designed to support this scenario?

forwarding

virtual switch

virtual router

non-forwarding

Q58. Exhibit:

Referring to the exhibit, which statement is true?

SRG1 is configured in hybrid mode.

The ICL is encrypted.

If SRG1 moves to peer 2, peer 1 will drop packets sent to the SRG1 interfaces.

If SRG1 moves to peer 2, peer 1 will forward packets sent to the SRG1 interfaces.

Q59. your company wants to take your juniper ATP appliance into private mode. You must give them a list of impacted features for this request.
Which two features are impacted in this scenario? (Choose two)

False Positive Reporting

Threat Progression Monitoring

GSS Telemetry

Cyber Kill Chain mapping

Your company wants to take your Juniper ATP Appliance into private mode. You must give them a list of impacted features for this request.
The two features that are impacted in this scenario are:
A) False Positive Reporting. False Positive Reporting is a feature that allows you to report false positive detections to Juniper Networks for analysis and improvement. False Positive Reporting requires an Internet connection to send the reports to Juniper Networks. If you take your Juniper ATP Appliance into private mode, False Positive Reporting will be disabled and you will not be able to report false positives1.
C) GSS Telemetry. GSS Telemetry is a feature that allows you to send anonymized threat data to Juniper Networks for analysis and improvement. GSS Telemetry requires an Internet connection to send the data to Juniper Networks. If you take your Juniper ATP Appliance into private mode, GSS Telemetry will be disabled and you will not be able to contribute to the threat intelligence community2.
The other options are incorrect because:
B) Threat Progression Monitoring. Threat Progression Monitoring is a feature that allows you to monitor the threat activity and progression across your network. Threat Progression Monitoring does not require an Internet connection and can be performed locally by the Juniper ATP Appliance. If you take your Juniper ATP Appliance into private mode, Threat Progression Monitoring will not be impacted and you will still be able to monitor the threat activity and progression3.
D) Cyber Kill Chain mapping. Cyber Kill Chain mapping is a feature that allows you to map the threat activity and progression to the stages of the Cyber Kill Chain framework. Cyber Kill Chain mapping does not require an Internet connection and can be performed locally by the Juniper ATP Appliance. If you take your Juniper ATP Appliance into private mode, Cyber Kill Chain mapping will not be impacted and you will still be able to map the threat activity and progression4.
Reference: False Positive Reporting GSS Telemetry
Threat Progression Monitoring Cyber Kill Chain Mapping

Q60. you are connecting two remote sites to your corporate headquarters site. You must ensure that traffic passes corporate headquarter.

In this scenario, which VPN should be used?

full mesh IPsec VPNs with tunnels between all sites

a full mesh Layer 3 VPN with the BGP route reflector behind the corporate firewall device

a Layer 3 VPN with the corporate firewall acting as the hub device

hub-and-spoke IPsec VPN with the corporate firewall acting as the hub device

Q61. Exhibit

An administrator wants to configure an SRX Series device to log binary security events for tenant systems.
Referring to the exhibit, which statement would complete the configuration?

Configure the tenant as TSYS1 for the pi security profile.

Configure the tenant as root for the pi security profile.

Configure the tenant as master for the pi security profile.

Configure the tenant as local for the pi security profile

Q62. Exhibit

Referring to the exhibit, which two statements are true? (Choose two.)

The 3uspicious_Endpoint3 feed is only usable by the SRX-1 device.

You must manually create the suspicious_Endpoint3 feed in the Juniper ATP Cloud interface.

The 3uspiciou3_Endpoint3 feed is usable by any SRX Series device that is a part of the same realm as SRX-1

Juniper ATP Cloud automatically creates the 3uopi’cioua_Endpoints feed after you commit the security policy.

Q63. You need to set up source NAT so that external hosts can initiate connections to an internal device, but only if a connection to the device was first initiated by the internal device.
Which type of NAT solution provides this functionality?

Address persistence

Persistent NAT with any remote host

Persistent NAT with target host

Static NAT

Q64. You want to enforce I DP policies on HTTP traffic.
In this scenario, which two actions must be performed on your SRX Series device? (Choose two)

Choose an attacks type in the predefined-attacks-group HTTP-All.

Disable screen options on the Untrust zone.

Specify an action of None.

Match on application junos-http.

Pass Your Juniper Exam with JN0-637 Exam Dumps: https://www.dumpsmaterials.com/JN0-637-real-torrent.html ¹

Links:

https://www.dumpsmaterials.com/JN0-637-real-torren t.html

Post date: 2025-04-08 12:39:03
Post date GMT: 2025-04-08 12:39:03

Post modified date: 2025-04-08 12:39:03
Post modified date GMT: 2025-04-08 12:39:03

Export date: Fri Apr 18 4:51:49 2025 / +0000 GMT
This page was exported from Free Exams Dumps Materials [ http://exams.dumpsmaterials.com ]