Based on Official Syllabus Topics of Actual Fortinet NSE7_PBC-7.2 Exam [Q14-Q28]

May 15, 2024 examdumps 0 Comment

4.3/5 - (3 votes)

Based on Official Syllabus Topics of Actual Fortinet NSE7_PBC-7.2 Exam

Free NSE7_PBC-7.2 Dumps are Available for Instant Access

Fortinet NSE7_PBC-7.2 certification exam is designed to test the knowledge and skills of professionals in public cloud security. Fortinet NSE 7 – Public Cloud Security 7.2 certification is highly valued in the IT industry, as it provides evidence of expertise in securing public cloud environments. NSE7_PBC-7.2 exam covers a range of topics, including cloud security fundamentals, cloud-specific threats and vulnerabilities, as well as advanced cloud security techniques.

NEW QUESTION 14
You are troubleshooting an Azure SDN connectivity issue with your FortiGate VM Which two queries does that SDN connector use to interact with the Azure management API? (Choose two.)

The first query is targeted to a special IP address to get a token.

The first query is targeted to IP address 8.8

There is only one query initiating from FortiGate port1 –

Some queries are made to manage public IP addresses.

NEW QUESTION 15
You need a solution to safeguard public cloud-hosted web applications from the OWASP Top 10 vulnerabilities. The solution must support the same region in which your applications reside, with minimum traffic cost Which solution meets the requirements?

Use FortiADC

Use FortiCNP

Use FortiWebCloud

Use FortiGate

NEW QUESTION 16
Refer to the exhibit.

You are troubleshooting a FortiGate HA floating IP issue with Microsoft Azure. After the failover, the new primary device does not have the previous primary device floating IP address.
What could be the possible issue With this scenario?

FortiGate port4 does not have internet access.

A wrong client secret credential is used

The error is caused by credential time expiration.

The Azure service principle account must have a contributor role.

NEW QUESTION 17
You are tasked with deploying a FortiGate HA solution in Amazon Web Services (AWS) using Terraform What are two steps you must take to complete this deployment? (Choose two.)

Enable automation on the AWS portal.

Create an AWS Identity and Access Management (IAM) user With permissions.

Use CloudSheIl to install Terraform.

Create an AWS Active Directory user with permissions.

NEW QUESTION 18
You are asked to find a solution to replace the existing VPC peering topology to have a higher bandwidth connection from Amazon Web Services (AWS) to the on-premises data center Which two solutions will satisfy the requirement? (Choose two.)

Use ECMP and VPN to achieve higher bandwidth.

Use transit VPC to build multiple VPC connections to the on-premises data center

Use a transit VPC with hub and spoke topology to create multiple VPN connections to the on-premises data center.

Use the transit gateway attachment With VPN option to create multiple VPN connections to the on-premises data center

Explanation
The correct answer is C and D. Use a transit VPC with hub and spoke topology to create multiple VPN connections to the on-premises data center. Use the transit gateway attachment with VPN option to create multiple VPN connections to the on-premises data center.
According to the Fortinet documentation for Public Cloud Security, a transit VPC is a VPC that serves as a global network transit center for connecting multiple VPCs, remote networks, and virtual private networks (VPNs). A transit VPC can use a hub and spoke topology to create multiple VPN connections to the on-premises data center, using the FortiGate VM as a virtual appliance that provides network security and threat prevention.A transit VPC can also leverage Equal-Cost Multi-Path (ECMP) routing to achieve higher bandwidth and load balancing across multiple VPN tunnels1.
A transit gateway is a network transit hub that connects VPCs and on-premises networks. A transit gateway attachment is a resource that connects a VPC or VPN to a transit gateway. You can use the transit gateway attachment with VPN option to create multiple VPN connections to the on-premises data center, using the FortiGate VM as a virtual appliance that provides network security and threat prevention.A transit gateway attachment with VPN option can also leverage ECMP routing to achieve higher bandwidth and load balancing across multiple VPN tunnels2.
The other options are incorrect because:
Using ECMP and VPN to achieve higher bandwidth is not a complete solution, as it does not specify how to replace the existing VPC peering topology or how to connect the AWS VPCs to the on-premises data center.
Using transit VPC to build multiple VPC connections to the on-premises data center is not a correct solution, as it does not specify how to use a hub and spoke topology or how to leverage ECMP routing for higher bandwidth.
1:Fortinet Documentation Library – Transit VPC on AWS2:Fortinet Documentation Library – Deploying FortiGate VMs on AWS

NEW QUESTION 19
You are tasked with deploying a FortiGate HA solution in Amazon Web Services (AWS) using Terraform What are two steps you must take to complete this deployment? (Choose two.)

Create an AWS Identity and Access Management (IAM) user With permissions.

Enable automation on the AWS portal.

Use CloudSheIl to install Terraform.

Create an AWS Active Directory user with permissions.

NEW QUESTION 20
Refer to Exhibit:

The exhibit shows the Connect Peers settings on Amazon Web Services (AWS) transit gateway attachments With two FortiGate VMS in a security VPC.
Which two statements are correct? (Choose two.)

The peer GRE address is the FortiGate external interface IP address.

The Transit Gateway GRE address is auto-generated

The BGP inside CIDR blocks can be any CIDR block with /29

The Peer GRE address is the FortiGate internal interface IP address

NEW QUESTION 21
Refer to the exhibit

You are tasked with deploying FortiGate using Terraform. When you run the terraform version command during the Terraform installation, you get an error message.
What could be the reason that you are getting the command not found error?

You must move the binary file to the bin directory.

You must change the directory location to the root directory

You must assign correct permissions to the ec2-user.

You must reinstall Terraform

NEW QUESTION 22
Refer to Exhibit:

After the initial Terraform configuration in Microsoft Azure, the terraform plan command is run Which two statements about running the plan command are true? (Choose two.)

The terraform plan command will deploy the rest of the resources except the service principle details.

You cannot run the terraform apply command before the terraform plan command.

You must run the terraform init command once, before the terraform plan command

The terraform plan command makes terraform do a dry run.

NEW QUESTION 23
What are three important steps required to get Terraform ready using Microsoft Azure Cloud Shell? (Choose three.)

Set up a storage account in Azure.

use the -O command to download Terraform.

Subscribe to Terraform in Azure.

Move the Terraform file to the bin directory.

Use the wget (te=aform vession) command to upload Terraform.

NEW QUESTION 24
Refer to the exhibit

An administrator deployed an HA active-active load balance sandwich in Microsoft Azure. The setup requires configuration synchronization between devices- What are two outcomes from the configured settings? (Choose two.)

FortiGate-VM instances are scaled out automatically according to predefined workload levels.

FortiGate A and FortiGate B are two independent devices.

By default, FortiGate uses FGCP

It does not synchronize the FortiGate hostname

NEW QUESTION 25
Refer to the exhibit

A customer has deployed an environment in Amazon Web Services (AWS) and is now trying to send outbound traffic from the Linux1 and Linux2 instances to the internet through the security VPC (virtual private cloud). The FortiGate policies are configured to allow all outbound traffic; however, the traffic is not reaching the FortiGate internal interface. Assume there are no issues with the Transit Gateway (TGW) configuration Which two settings must the customer add to correct the issue? (Choose two.)

Both landing subnets in the spoke VPCs must have a 0.0.0.0/0 traffic route to the Internet Gateway (IOW).

Both landing subnets in the spoke VPCs must have a 0.0 00/0 traffic route to the TGW

Both landing subnets in the security VPC must have a 0.0.0.0/0 traffic route to the FortiGate port2.

The four landing subnets in all the VPCs must have a 0.0 0 0/0 traffic route to the TGW

NEW QUESTION 26
Which two attachments are necessary to connect a transit gateway to an existing VPC with BGP? (Choose two )

A transport attachment

A BGP attachment

A connect attachment

A GRE attachment

NEW QUESTION 27
Refer to the exhibit

You are deploying two FortiGate VMS in HA active-passive mode with load balancers in Microsoft Azure Which two statements are true in this load balancing scenario? (Choose two.)

The FortiGate public IP is the next-hop for all the traffic.

An internal load balancer listener is the next-hop for outgoing traffic.

You must add a route to the Microsoft VIP used for the health check.

A dedicated management interface can be used for load balancing.

NEW QUESTION 28
Refer to the exhibit.

You are configuring a second route table on a Transit Gateway to accommodate east-west traffic inspection between two VPCs_ However, you are getting an error during the transit gateway route table association With the Connect attachment.
Which action Should you take to fulfill your requirement?

Add both Associations and Propagations in the second TGW route table.

Delete the both Connect and Transport attachments from the first TGW route table

Add a static route in the Routes section

In the second route table: create a propagation with the Connect attachment.

Fortinet NSE7_PBC-7.2 certification exam is a comprehensive test that covers a wide range of topics related to cloud security. NSE7_PBC-7.2 exam includes questions on cloud computing, virtualization, network security, and Fortinet Security Fabric. NSE7_PBC-7.2 exam is designed to test the skills of professionals who manage public cloud environments using Fortinet’s Security Fabric. NSE7_PBC-7.2 exam consists of multiple-choice questions that test the knowledge and skills of the candidate.

The Most In-Demand NSE7_PBC-7.2 Pass Guaranteed Quiz : https://www.dumpsmaterials.com/NSE7_PBC-7.2-real-torrent.html