[Q164-Q182] Pass Your HCIA-Access H35-210_V2.5-ENU Exam Easily with Accurate PDF Questions [Sep 27, 2025]

NEW QUESTION 164
Passive optical network (PON) is a single-fiber bidirectional optical access network with what structure?

Chain type

Ring type

Tree type

Mesh type

NEW QUESTION 165
The Ethernet switch works in OSI
Which layer of the reference model?

Physical layer

data link layer

Network layer

Transport layer

NEW QUESTION 166
When the UA5000 is configured with the H.248 protocol to connect to the soft switch, which of the following parameters must be consistent at both ends?

Transport layer protocol type

Transport layer protocol port number

Coding method

MG interface description information

NEW QUESTION 167
Which of the following are common Ethernet switch VLAN link types? (Multiple choice)

Mix

Hybrid

Access

Trunk

NEW QUESTION 168
The xPON system adopts WDM technology to realize single-fiber bidirectional transmission.

TRUE

FALSE

NEW QUESTION 169
What is the index range of MA5600 extended access control list?

1-999

1000-1999

2000-2999

3000-3999

NEW QUESTION 170
Which of the following are common methods for locating Ethernet connection faults?

Check the port indicator status

Check the port configuration

Ping

View the statistics of packets sent and received by the port

NEW QUESTION 171
Which of the following related parameters are defined in the ONT line template? (Multiple choice)

TCONT

Mapping of GEMPort and datagram

GEMPort

The number of ETH ports of ONT

NEW QUESTION 172
At a certain UA5000 site, due to resource constraints, the entire frame of ADSL users need to pass a VLAN upstream to the IP network.
At this time, why should the upstream VLAN in the IPM board be defined?

standard vlan;

smart vlan;

mux vlan;

super vlan

NEW QUESTION 173
How many bytes does the EthernetII header (without VLAN TAG) include?

NEW QUESTION 174
Which control frame messages are defined by MPCP?

GATE

REPORT

NEW QUESTION 175
When testing the average transmit optical power of an optical interface, which of the following descriptions are incorrect?

The optical fiber connector and the optical connector on the optical interface board panel are clean and well connected

The optical power meter is calibrated

Connect one end of the test pigtail of the optical power meter to the “Rx” port of the optical interface board, and connect the other end of the pigtail to the optical power meter.

Repeat several times to check whether the maximum and minimum measured average transmit optical power meet the technical requirements.

NEW QUESTION 176
Which of the following products are not part of the ONU series?

MA5612

MA5652G

HG8247

MA5600T

NEW QUESTION 177
Is the following description correct? MA5680T supports the function of traffic shaping on specific service-ports.

True

False

NEW QUESTION 178
In the GPON network, which of the following statements is incorrect?

Each T-CONT is composed of one or more GEM Ports, and each GEM Port carries a service flow. A T-CONT can carry data streams of one or more types of services.

Each GEM Port is identified by a unique Port-ID. The Port-ID ranges from 0 to 4095 and is globally assigned by the OLT. That is, each ONU/ONT under the OLT cannot use GEMs with repeated Port-IDs. Port.

GEM Port identifies the service virtual channel between the OLT and ONU/ONT, that is, the channel that carries the service flow, similar to the VPI/VCI identification in the ATM virtual connection.

Each GPON port supports up to 32 ONU/ONT

NEW QUESTION 179
How many channels of ADSL2+&POTS access services are provided by the MA5600T ADSL2+&POTS integrated service board H80BCAME?

NEW QUESTION 180
What fax modes are supported in UA5000?

Interactive fax mode

Transparent transmission method

T38 fax method

Instantaneous one-way mode

NEW QUESTION 181
Is the following description correct? The process of voice fault location can generally be divided into: troubleshooting the external device fault, locating the fault to the specific device, and locating the fault to the board.

True

False

NEW QUESTION 182
The value of the PROTOCOL field of the PPP protocol is 8021, what is the protocol represented?

LCP

IPCP

IPX