[Sep 01, 2026] Get Up-To-Date Real Exam Questions for HPE7-V01 with New Materials [Q20-Q39]

NEW QUESTION 20
Your customer is requesting an update to their data protection plan, to include a copy of several volumes to two different locations. The current environment is utilizing HPE Alletra Storage MP B10000 systems.
What is true about this solution?

Synchronous replication can be used to define two destination targets, when appropriate license is installed.

Synchronous replication can be configured between three arrays.

Asynchronous replication can be configured between three arrays.

A synchronous long-distance periodic copy configuration can be used to define two destination targets.

NEW QUESTION 21
You are designing a solution for a customer that will support a virtualization workload based on HPE Synergy. Your customer has the following requirements:
* Dual-socket HPE Synergy compute nodes running ESXi 8.x with maximum memory supported
* Each node should have access to shared storage from HPE Alletra Storage MP B10000
* All virtual machines should be protected against host failure
* All virtual machines with vGPU must be protected with Fault Tolerance
* All compute nodes should boot from disks located in the D3940 Storage Modules protected with RAID
1
* All frames should be managed as one logical enclosure to simplify management
* All compute nodes should support two network ports with the maximum Ethernet connectivity speed You are reviewing a proposal that you must verify. The proposal consists of:
* 3 x HPE Synergy 12000 frames
* 2 x HPE Synergy Composer2 modules
* 4 x HPE Virtual Connect SE 100Gb F32 Modules for Synergy
* 4 x HPE Synergy 50Gb Interconnect Link Modules
* 3 x HPE Synergy D3940 Storage Modules, each with 20 SSD drives
* 1152 core VMware vSphere Enterprise Plus subscriptions
* 36 x HPE Synergy 480 Gen11 compute nodes
Each SY480 Gen11 is configured with:
* A single Platinum CPU with 32 cores
* HPE Synergy 6820C 25/50Gb Converged Network Adapter
* HPE Synergy 5830C 32Gb Fibre Channel Host Bus Adapter
* HPE MR416i-o Gen11 12G SAS Mezzanine Controller
Which two statements are true regarding the proposal? (Select two.)

2 HPE Synergy 50Gb Interconnect Link Modules should be removed from the proposal, as the total number of interconnects required is six.

HPE MR416i-o Smart RAID controller can be removed because there are no external SAS disk enclosures included in the proposal.

Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy can be removed from the proposal because all requirements are met without them.

To access HPE Alletra MP B10000 arrays, FC upgrade licenses for HPE Virtual Connect SE 100Gb F32 Modules for Synergy must be purchased.

vSphere Enterprise Plus subscriptions can be replaced with vSphere Standard subscriptions.

NEW QUESTION 22
Your customer would like to implement Peer Persistence for their HPE Alletra 6000 remote replication configuration.
Which two statements are true? (Select two.)

Downstream array works as a witness.

The upstream volume reports active paths; downstream reports standby.

Both arrays can host upstream and downstream volumes.

Upstream array works as a witness.

Peer Persistence only works for FC host connectivity.

NEW QUESTION 23
Your customer plans to replace a legacy HPE BladeSystem solution with the HPE Synergy platform.
The customer requirements include:
* 30 compute nodes to support their virtualization workloads
* Redundancy within the management subsystem
* An in-frame storage solution to support vSAN
* A guidance/automation technology with HPE Aruba to virtualize WWNs
* Simplified management with a single logical enclosure
You are reviewing the following proposal:
* 3 x HPE Synergy 12000 frames
* 2 x HPE Virtual Connect SE 100Gb F32 Modules for Synergy
* 4 x HPE Synergy 50Gb Interconnect Link Modules
* 3 x HPE D3940 Storage Modules with maximum number of drives
* 6 x HPE Composer2 + 30 x HPE OneView Advanced licenses
* 30 x SY 480 Gen11 compute modules, each with 2 CPUs and appropriate mezzanine cards Which statement about the proposal is true to help meet the customer requirements?

Additional HPE OneView Advanced licenses should be added for the HPE Virtual Connect modules and HPE D3940 Storage Modules.

HPE 32Gb Fibre Channel switches should be added to the proposal to enable WWN virtualization and profile mobility.

Each frame should be equipped with two HPE 12Gb SAS switches to provide connectivity between compute nodes and D3940 Storage Module.

3 x HPE Composer 2 modules can be removed from the proposal, as you need one HPE Composer2 module per HPE Synergy frame for enhanced availability.

NEW QUESTION 24
Your customer’s environment includes HPE Private Cloud Business Edition with deployed HPE SimpliVity
380 Gen11 nodes.
They have asked you to upgrade the vSphere, OmniStack, and firmware components of the environment in a fully controlled operation.
Which tool should you use?

HPE GreenLake / DSCC / PCBE site upgrade

HPE SimpliVity Upgrade Manager application

HPE OCA/HPC plugin and vCenter Update Manager

HPE OVC/HPC plugin and vCenter Update Manager

NEW QUESTION 25
A customer is about to do a server refresh with the intent of using HPE ProLiant DL360 Gen11 servers, with CPUs exceeding 270 watt power usage. The customer has existing third-party, 42U, air-cooled racks they are planning to reuse.
Which cooling option will allow your customer to install the servers with their existing racks, with the least amount of changes to the setup?

Use of liquid-cooled racks.

Use of closed-loop liquid cooling.

Use of direct liquid cooling.

Use of high performance fans.

NEW QUESTION 26
Which statement about the security of HPE solutions is correct?

Aruba switches have the Pensando ASIC integrated, which provides security services like firewall, micro-segmentation, and telemetry.

Aruba CX 6300 Switch Series has Pensando ASIC integrated, which provides security services like firewall, micro-segmentation, and telemetry.

HPE Apollo Gen10 or later systems and ProLiant Gen10 or later systems support Pensando Distributed Services Cards.

HPE Superdome Flex supports Pensando Distributed Services Cards with additional licenses per HPE Superdome Flex chassis.

NEW QUESTION 27
Your customer has a networking environment based on Aruba CX 8325 switches configured with Quality of Service settings that give higher priority to iSCSI traffic between HPE ProLiant servers and HPE Alletra 6000 storage. They are planning to add HPE Synergy frames with HPE Virtual Connect modules that will connect to the same Aruba infrastructure.
The frames will be deployed in different VLANs. They need to update their environment to provide a lossless fabric for RoCE traffic that will traverse between the HPE Synergy frames and through multiple switches.
Your customer has two sets of Synergy frames in different logical enclosures connected with Aruba CX 8325 switches. They want to update their environment to provide lossless traffic for RoCE traffic.
What is the correct environmental or design change that will meet the customer’s new requirement?

Use RoCEv1 and configure DCBX on the switch facing the CNA in the servers.

Server Profiles should include redundant connections to a RoCE network.

Create DCB queues using server’s operating system utility.

Assign two different priority values to RoCE traffic.

NEW QUESTION 28
Your customer wants to simplify storage management for their VMware-based environment by configuring HPE Storage Integration Pack for VMware vCenter Server. They want to use HPE OneView for VMware vCenter Server for ESXi deployment.
Currently, they have 30 HPE ProLiant DL360 Gen11 deployed with ESXi 8.x and they plan to add 30 additional systems with exactly the same setup. Storage capacity is provided by HPE Alletra Storage MP B10000.
Which statement about the configuration and customer requirements is true?

HPE Storage Integration Pack for VMware vCenter Server and HPE OneView for VMware vCenter Server only support the HPE Synergy platform managed using HPE Composer2.

Your customer must purchase the appropriate number of licenses for HPE Storage Integration Pack for VMware vCenter Server and HPE OneView for VMware vCenter Server.

Using HPE Storage Integration Pack for VMware vCenter Server for VVol creation is only supported if the ESXi systems have vSphere Enterprise Plus subscriptions.

HPE OneView for VMware vCenter Server supports the Proactive HA feature, which will define the response in case of host health degradation to improve workload availability.

NEW QUESTION 29
Your customer is planning a Scality RING solution. Approximately 750 TB of data must be stored on the SDS. The customer prefers SSD or NVMe drives.
What is true regarding this solution?

HPE servers, for example, such as Alletra Storage Server 4120, can be used for Scality RING deployments.

The minimum capacity for ordering Scality RING perpetual licenses is 1000TB.

Scality RING Single Site Hardware Lifetime licenses are provided at a lower cost compared to perpetual licenses.

Scality licenses cannot be purchased from HPE.

NEW QUESTION 30
Your customer wants to implement an HPE SimpliVity stretched cluster spanning two sites to improve availability.
You are reviewing an HPE SimpliVity proposal that consists of the following components:
* 12 HPE SimpliVity 380 Gen11 nodes, 8 for the primary site and 4 for the remote site, all of which have
2 CPUs, 16 cores each
* 12 HPE OneView Advanced licenses
* 2 HPE Alletra Storage MP B10000, 1 for the primary site and 1 for the remote site
* 384 core VMware vSphere Standard subscriptions
* Two pairs of ArubaOS-CX 8325 switches
Which statement about this proposal is true?

Additional VMware subscriptions should be added, as the HPE SimpliVity 380 Gen11 core count is higher than needed.

In order to enable DRS functionality, vSphere Standard subscriptions should be replaced with vSphere Foundation subscriptions.

A Remote Copy license should be activated on all HPE Alletra arrays to enable remote HPE SimpliVity backups.

Aruba OS-CX 8325 should be enhanced with a Pensando license so HPE SimpliVity traffic can be secured.

NEW QUESTION 31
Your customer wants to simplify storage management for their VMware-based environment by configuring HPE Storage Integration Pack for VMware vCenter Server. They want to use HPE OneView for VMware vCenter Server for ESXi deployment.
Currently, they have 30 HPE ProLiant 380 Gen10 Plus deployed with ESXi 7.x and they plan to add 30 additional systems with exactly the same setup. Storage capacity is provided by HPE Alletra and HPE Primera arrays.
Which statement about the configuration and customer requirements is correct?

Your customer must purchase the appropriate number of licenses for HPE Storage Integration Pack for VMware vCenter Server and HPE OneView for VMware vCenter Server.

Any single storage component added to HPE Storage Integration Pack for VMware vCenter Server must have a capacity-based license assigned.

Using HPE Storage Integration Pack for VMware vCenter Server for VVol creation is only supported if the ESXi systems have vSphere Enterprise Plus licenses assigned.

HPE OneView for VMware vCenter Server is available for all customers managing their systems using HPE OneView without any additional cost.

NEW QUESTION 32
Your customer has a combination of HPE and non-HPE equipment.
Which is the correct functionality available in Aruba Fabric Composer for this customer’s environment?

Management and monitoring of HPE Alletra Storage MP B10000 arrays.

Management of Pensando cards in the servers.

VLAN visibility of VMware on non-HPE servers.

Configuration of SAN zoning on ArubaOS-CX 8400 switches.

NEW QUESTION 33
You are designing an HPE solution for SAP HANA. You are considering an as-a-service approach as one of the variants to be proposed to the customer.
What is true regarding HPE GreenLake for SAP HANA?

HPE GreenLake for SAP HANA requires an onsite HPE Alletra Storage MP X10000.

HPE GreenLake for SAP HANA offers billing based on GB of RAM used by SAP HANA.

HPE GreenLake for SAP HANA can be used for SAP HANA instances running in the public cloud.

HPE GreenLake for SAP HANA offers billing based on the amount of users using SAP HANA.

NEW QUESTION 34
Your customer has a combination of HPE and non-HPE equipment.
What is the correct functionality available in Aruba Fabric Composer for this customer’s environment?

Configuration of SAN zoning on ArubaOS-CX 8400 switches.

Acceleration of spine-leaf fabric provisioning on ArubaOS-CX switches.

Management and monitoring of HPE Alletra Storage MP B10000 arrays.

Management and monitoring of HPE Synergy Virtual Connect.

NEW QUESTION 35
Your customer plans to replace a legacy HPE BladeSystem solution with the HPE Synergy platform.
The customer requirements include:
* 30 compute nodes to support their virtualization workloads
* Redundancy within the management subsystem
* An in-frame storage solution to support vSAN
* A redundant networking subsystem with the ability to virtualize WWNs
* Simplified management with a single logical enclosure
You are reviewing the following proposal:
* 3 x HPE Synergy 12000 frames
* 2 x HPE Virtual Connect SE 100Gb F32 Modules for Synergy
* 4 x HPE Synergy 50Gb Interconnect Link Modules
* 3 x HPE D3940 Storage Modules with maximum number of drives
* 6 x HPE Composer2 + 30 x HPE OneView Advanced licenses
* 30 x SY 480 Gen11 compute modules, each with 2 CPUs and appropriate mezzanine cards Which statement about this proposal is true to help meet the customer requirements?

Additional HPE OneView Advanced licenses should be added for the HPE Virtual Connect modules and HPE D3940 Storage Modules.

30 x HPE OneView Advanced licenses should be removed from the proposal.

HPE 32Gb switches should be added to the proposal to enable WWNs virtualization and profile mobility.

3 x HPE Composer2 modules can be removed from the proposal, as you need one HPE Composer2 module per HPE Synergy frame for enhanced availability.

NEW QUESTION 36
You presented a solution to your customer that will replace their legacy HPE BladeSystem.
The new solution is based on the HPE Synergy platform and consists of the following components:
* 5 HPE Synergy 12000 frames
* 2 HPE Virtual Connect SE 100Gb F32 Module for Synergy
* 8 HPE Synergy 50Gb Interconnect Link Module
* 60 HPE Synergy 480 Gen11
Which statement describes the business and financial benefits for this new solution on the customer?

HPE Synergy supports master/satellite approach that requires less HPE Virtual Connect modules, and so will be more economical.

Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more interconnect modules which provides better scalability and expansion possibilities.

Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more expansion slots in the form of mezzanine cards.

HPE Synergy needs more HPE Virtual Connect modules because of the increased bandwidth for Gen11 compute nodes.

NEW QUESTION 37
Your customer is using an HPE SimpliVity 380 Gen11 environment that is only managed with on-premises utilities.
How can this solution be integrated into the HPE GreenLake management platform to benefit from the HPE Private Cloud Business Edition features?

By deploying the Data Services Connector VM and importing the cluster to DSCC.

By introducing the cluster as a PCBE setup integrated with DSCC.

By replacing the iLO using the HPE Compute Ops Management activation process.

By configuring the OmniStack integration with HPE InfoSight.

NEW QUESTION 38
Your customer is planning to buy a new hardware platform for their HPC application.
They are considering an environment with 150 HPE Cray XD2000 systems with XD225v and XD220v servers.
Your customer has the following requirements for a management platform:
* Supports Ubuntu Linux 24.04 operating system
* Supports bare metal server operating system provisioning
* Has the ability to install operating system in parallel on multiple nodes
* Management platform is highly available
You are exploring HPE Performance Cluster Manager (HPCM) as a solution.
What statement is true in this scenario?

HPE Performance Cluster Manager will fit the customer’s requirements.

One server node must be reserved for the Admin Node.

A different management solution must be used for parallel OS installation.

The Slingshot network component must be added to the solution.

NEW QUESTION 39
Your customer has provided the CLI output of a switch to show how their devices are connected.
Refer to the output:
show arp
IPv4 Address MAC Port Physical Port State
10.0.255.2 … vlan150 … reachable
10.12.43.1 … vlan1 … reachable
10.0.255.3 … vlan150 … reachable
Total Number Of ARP Entries Listed: 3.
What should you consider while discussing upgrades to your customer’s environment and network components?

The support for VSF stacking functionality.

The support for Overlay networks is required.

The support for IGMP snooping is mandatory.

The support for Virtual Switching Extension is required.