[2025] Earn Quick And Easy Success With NSE7_LED-7.0 Dumps [Q11-Q26]

December 17, 2025December 17, 2025 examdumps[2025] Earn Quick And Easy Success With NSE7_LED-7.0 Dumps [Q11-Q26] 0 Comment

Tags: new NSE7_LED-7.0 practice test fee, new NSE7_LED-7.0 visual cert test, NSE7_LED-7.0 Latest version, NSE7_LED-7.0 reliable exam lab questions, NSE7_LED-7.0 valid test sims

Rate this post

[2025] Earn Quick And Easy Success With NSE7_LED-7.0 Dumps

Free NSE7_LED-7.0 pdf Files With Updated and Accurate Dumps Training

Fortinet NSE 7 – LAN Edge 7.0 Exam is a vendor-specific certification exam that is designed for IT professionals who work with Fortinet products. NSE7_LED-7.0 exam is ideal for network administrators, security professionals, and anyone else who is responsible for managing and securing LAN edge networks. NSE7_LED-7.0 exam is also suitable for those who are interested in becoming Fortinet certified network security experts.

Fortinet NSE7_LED-7.0 exam is a challenging certification exam that requires extensive knowledge and experience in network security. It is designed to test the skills and expertise of IT professionals in securing LAN edge networks, which are critical components of modern enterprise networks. NSE7_LED-7.0 exam is designed to validate the knowledge and skills of IT professionals in designing, implementing, and managing secure LAN edge networks.

QUESTION 11
Refer to the exhibits

The exhibits show the wireless network (VAP) SSID profiles defined on FortiManager and an AP profile assigned to a group of APs that are supported by FortiGate None of the APs are broadcasting the SSlDs defined by the AP profile Which changes do you need to make to enable the SSIDs to broadcast?

In the SSIDs section enable Tunnel

Enable one channel in the Channels section

Enable multiple channels in the Channels section and enable Radio Resource Provision

In the SSIDs section enable Manual and assign the networks manually

QUESTION 12
Refer to the exhibits.

Examine the debug output and the SSL VPN configuration shown in the exhibits.

An administrator has configured SSL VPN on FortiGate. To improve security, the administrator enabled Required Client Certificate on the SSL VPN configuration page. However, a user is unable to successfully authenticate to SSL VPN.
Which configuration change should the administrator make to fix the problem?

Enable Redirect HTTP to SSL-VPN on the SSL VPN configuration page.

Import the CA that signed the SSL VPN Server Certificate to FortiGate.

Set the user certificate as the Server Certificate on the SSL VPN configuration page.

Import the CA that signed the user certificate to FortiGate.

QUESTION 13
Refer to the exhibits. The exhibits show the wireless network (VAP) SSID profiles defined on FortiManager and an AP profile assigned to a group of APs that are supported by FortiGate.
None of the APs are broadcasting the SSlDs defined by the AP profile.

Which changes do you need to make to enable the SSIDs to broadcast?

In the SSIDs section enable Tunnel

Enable one channel in the Channels section

Enable multiple channels in the Channels section and enable Radio Resource Provision

In the SSIDs section, enable Manual and assign the networks manually

To enable the SSID, you must select at least one channel for the radio. If no channels are selected, the SSID will not be enabled. Therefore, enabling one channel in the Channels section will allow the SSIDs to broadcast.

QUESTION 14
Refer to the exhibit.

Examine the IPsec VPN phase 1 configuration shown in theexhibit
An administrator wants to use certificate-based authentication for an IPsec VPN user Which three configuration changes must you make on FortiGate to perform certificate-based authentication for the IPsec VPN user? (Choose three)

Create a PKI user for the IPsec VPN user, and then configure the IPsec VPN tunnel to accept the PKI user as peer certificate

In the Authentication section of the IPsec VPN tunnel in the Method drop-down list select Signature and then select the certificate that FortiGate will use for IPsec VPN

In the IKE section of the IPsec VPN tunnel in the Mode field select Main (ID protection)

Import the CA that signed the user certificate

Enable XAUTH on the IPsec VPN tunnel

Explanation
According to the FortiGate Administration Guide, “To use certificate-based authentication, you must configure the following settings on both peers: Select Signature as the authentication method and select a certificate to use for authentication. Import the CA certificate that issued the peer’s certificate. Enable XAUTH on the phase 1 configuration.” Therefore, options B, D, and E are true because they describe the configuration changes that must be made on FortiGate to perform certificate-based authentication for the IPsec VPN user.
Option A is false because creating a PKI user for the IPsec VPN user is not required, as the user certificate can be verified by the CA certificate. Option C is false because changing the IKE mode to Main (ID protection) is not required, as the IKE mode can be either Main or Aggressive for certificate-based authentication.

QUESTION 15
Refer to the exhibits.

In the WTP profile configuration shown in the exhibit, the AP profile is assigned to two FAP-320 APs that are installed in an open plan office.

The first AP has 32 clients associated with the 5 GHz radios and 22 clients associated with the 2.4 GHz radio.
The second AP has 12 clients associated with the 5 GHz radios and 20 clients associated with the 2.4 GHz radio.
A dual-band-capable client enters the office near the first AP and the first AP measures the new client at -33 dBm signal strength. The second AP measures the new client at 2 -43 dBm signal strength.
If the new client attempts to connect to the corporate wireless network, with which AP radio will the client be associated?

The second AP 2.4 GHz interface.

The first AP 5 GHz interface.

The second AP 5 GHz interface.

The first AP 2.4 GHz interface.

QUESTION 16
Refer to the exhibit.

Examine the RADIUS server configuration shown in the exhibit
An administrator has configured a RADIUS server on FortiGate that points to FortiAuthenticator FortiAuthenticator is acting as an authentication proxy and is configured to relay all authentication requests to a remote Windows AD server using LDAP While testing the configuration the administrator noticed that the diagnosetest authserver command worked with PAP, however authentication requests failed when using MSCHAP2 Which two solutions can the administrator implement to get MSCHAP2 authentication to work” (Choose two.)

On FortiAuthenticator enable Windows Active Directory Domain Authentication to add FortiAuthenticator to the Windows domain

On FortiGate configure the NAS IP setting on the RADIUS
server

On FortiAuthenticator change the back-end authentication server from LDAP to RADIUS

On FortiGate update the Secret setting on the RADIUS server

Explanation
According to the exhibit, the RADIUS server configuration on FortiGate points to FortiAuthenticator, which is acting as an authentication proxy and is configured to relay all authentication requests to a remote Windows AD server using LDAP. However, LDAP does not support MSCHAP2 authentication, which is required for RADIUS. Therefore, option A is true because on FortiAuthenticator, enabling Windows Active Directory Domain Authentication will add FortiAuthenticator to the Windows domain and allow it to use MSCHAP2 authentication with the AD server. Option C is also true because on FortiAuthenticator, changing the back-end authentication server from LDAP to RADIUS will allow it to use MSCHAP2 authentication with the AD server. Option B is false because on FortiGate, configuring the NAS IP setting on the RADIUS server will not affect the MSCHAP2 authentication, but rather the source IP address of the RADIUS packets. Option D is false because on FortiGate, updating the Secret setting on the RADIUS server will not affect the MSCHAP2 authentication, but rather the shared secret between FortiGate and FortiAuthenticator.

QUESTION 17
Refer to the exhibit.

An administrator wants to telnet into the S224EPTF19005867 switch over the FortiGate FortiLink interface.
Which configuration change should the administrator make?

Enable telnet access on the FortiLink interface.

On the default local-access profile, add telnet to the list of allowed protocols for mgmt-allowaccess.

On the default local-access profile, add telnet to the list of allowed protocols for internal-allowaccess.

Factory reset the switch to enable telnet access.

QUESTION 18
An administrator is deploying AP’s that are connecting over an IPsec network. All APs have been configured to connect to FortiGate manually. FortiGate can discover the APs and authorize them. However, FortiGate is unable to establish CAPWAP tunnels to manage the APs.
Which configuration setting can the administrator perform to resolve the problem?

Upgrade the FortiAP firmware image to ensure compatibility with the FortiOS version.

Decrease the CAPWAP tunnel MTU size for APs to prevent fragmentation.

Enable CAPWAP administrative access on the IPsec interface.

Assign a custom AP profile for the remote APs with the set mpls-connection option enabled.

QUESTION 19
Refer to the exhibits

The exhibits show the wireless network (VAP) SSID profiles defined on FortiManager and an AP profile assigned to a group of APs that are supported by FortiGate None of the APs are broadcasting the SSlDs defined by the AP profile Which changes do you need to make to enable the SSIDs to broadcast?

In the SSIDs section enable Tunnel

Enable one channel in the Channels section

Enable multiple channels in the Channels section and enable Radio Resource Provision

In the SSIDs section enable Manual and assign the networks manually

Explanation
According to the FortiManager Administration Guide1, “To enable the SSID, you must select at least one channel for the radio. If no channels are selected, the SSID will not be enabled.” Therefore, enabling one channel in the Channels section will allow the SSIDs to broadcast.

QUESTION 20
When you configure a FortiAP wireless interface for auto TX power control which statement describes how it configures its transmission power”?

Every 30 seconds the AP will measure the signal strength of the AP using the client The AP will adjust its signal strength up or down until the AP signal is detected at -70 dBm

Every 30 seconds FortiGate measures the signal strength of adjacent AP interfaces It will adjust its own AP power to match the adjacent AP signal strength

Every 30 seconds FortiGate measures the signal strength of adjacent FortiAP interfaces It will adjust the adjacent AP power to be detectable at -70 dBm

Every 30 seconds FortiGate measures the signal strength of the weakest associated client The AP will then configure its radio power to match the detected signal strength of the client

QUESTION 21
Refer to the exhibits.

Firewall Policy

Examine the firewall policy configuration and SSID settings
An administrator has configured a guest wireless network on FortiGate using the external captive portal The administrator has verified that the external captive portal URL is correct However wireless users are not able to see the captive portal login page Given the configuration shown in the exhibit and the SSID settings which configuration change should the administrator make to fix the problem?

Disable the user group from the SSID configuration

Enable the captivs-portal-exempt option in the firewall policy with the ID 11.

Apply a guest.portal user group in the firewall policy with the ID 11.

Include the wireless client subnet range in the Exempt Source section

According to the FortiGate Administration Guide, “To use an external captive portal, you must configure a user group that uses the external captive portal as the authentication method and apply it to a firewall policy.” Therefore, option C is true because it will allow the wireless users to be redirected to the external captive portal URL when they try to access the Internet. Option A is false because disabling the user group from the SSID configuration will prevent the wireless users from being authenticated by the FortiGate device. Option B is false because enabling the captive-portal-exempt option in the firewall policy will bypass the captive portal authentication for the wireless users, which is not the desired outcome. Option D is false because including the wireless client subnet range in the Exempt Source section will also bypass the captive portal authentication for the wireless users, which is not the desired outcome.

QUESTION 22
Which three FortiOS tools can you use to troubleshoot RADIUS authentication issues? (Choose three.)

You can enable debug for the fssod process to view RADIUS authentication details.

You can use the diagnose test authserver radius command to verify RADIUS server configuration, user credentials, and user group membership.

You can check the Firewall Users widget to view the list of active RADIUS users.

You can enable debug for the fnbamd process to view RADIUS authentication details.

You can use the diagnose test application radiusd command to verify the RADIUS server configuration, user credentials, and user group membership.

Fortinet’s official documentation, including the FortiOS Handbook and NSE 7 training materials, provides detailed guidance on troubleshooting RADIUS authentication issues. The three tools listed below are explicitly supported for diagnosing RADIUS-related problems in FortiOS:
* B. You can use the diagnose test authserver radius command to verify RADIUS server configuration, user credentials, and user group membership.This command is a well-documented troubleshooting tool in the FortiOS CLI Reference and Technical Documentation. It allows administrators to manually test RADIUS authentication by specifying the RADIUS server, username, and password. The output provides details on whether the authentication succeeds or fails, along with information about group membership and server reachability. For example:
bash
CollapseWrapCopy
diagnose test authserver radius <server_name> <username> <password>
This is a critical tool for verifying the RADIUS server’s configuration and user authentication flow.
* D. You can enable debug for the fnbamd process to view RADIUS authentication details.The fnbamd process (FortiNet Authentication Daemon) handles non-local authentication protocols like RADIUS and LDAP in FortiOS. Enabling debug for this process provides real-time logs of the authentication exchange between the FortiGate and the RADIUS server. This is officially recommended in Fortinet’s troubleshooting guides for advanced diagnostics. The command sequence is:
bash
CollapseWrapCopy
diagnose debug application fnbamd -1
diagnose debug enable
After testing, you can disable debugging with diagnose debug disable. This tool is invaluable for identifying issues such as misconfigured shared secrets, timeouts, or attribute mismatches.
* E. You can use the diagnose test application radiusd command to verify the RADIUS server configuration, user credentials, and user group membership.The radiusd process relates to the RADIUS daemon on the FortiGate, and this diagnostic command tests the RADIUS server’s operational status and authentication functionality. While less commonly highlighted than diagnose test authserver radius, it is referenced in Fortinet’s CLI documentation for deeper troubleshooting of the RADIUS service itself. It provides detailed output about the server’s response and can help isolate issues specific to the RADIUS protocol implementation.
Why not A and C?
* A. You can enable debug for the fssod process to view RADIUS authentication details.The fssod process relates to FortiSSO (Single Sign-On) and is primarily used for FSSO-based authentication, not direct RADIUS troubleshooting. While it may log some authentication-related events in specific SSO scenarios, it is not a standard tool for RADIUS diagnostics according to Fortinet’s official documentation. Thus, it is not a correct choice here.
* C. You can check the Firewall Users widget to view the list of active RADIUS users.While the Firewall Users widget (available in the FortiOS GUI underUser & Authentication > Firewall Users) shows a list of authenticated users, it is a monitoring tool, not a troubleshooting tool. It does not provide diagnostic details about RADIUS authentication failures or server issues, making it insufficient for this purpose per Fortinet’s troubleshooting methodology.
Source Verification
The answers are derived from official Fortinet resources, including:
* FortiOS 7.0 CLI Reference(diagnose commands section)
* FortiOS Handbook: Authentication(RADIUS troubleshooting section)
* NSE 7 – LAN Edge 7.0 training materials (authentication diagnostics module) These tools (B, D, E) align with Fortinet’s recommended practices for diagnosing RADIUS authentication issues effectively.

QUESTION 23
Which two statements about the use of digital certificates are true? (Choose two.)

A chain of trust may include one or more intermediate CAs.

In a chain of trust, the root CA is signed by another certificate.

To validate the signature on a certificate, an endpoint does not need to know the CA of that certificate.

An intermediate CA can sign other certificates.

QUESTION 24
An administrator is testing the connectivity for a new VLAN. The devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate. Quarantine is disabled on FortiGate.
While testing, the administrator noticed that devices can ping FortiGate and FortiGate can ping the devices. The administrator also noticed that inter-VLAN communication works. However, intra-VLAN communication does not work.
Which scenario is likely to cause this issue?

Access VLAN is enabled on the VLAN

The native VLAN configured on the ports is incorrect

The FortiSwitch MAC address table is missing entries

The FortiGate ARP table is missing entries

QUESTION 25
Which two statements about FortiSwitchmanager are true1? (Choose two)

Per-device management is the default management mode on FortiManager

FortiManager obtains the FortiSwitch status information by querying the FortiGate REST API every three minutes

If the administrator makes any changes on FortiSwitch manager they must also install those changes on FortiGate so that those changes are applied on the managed switches

Any switch discovered or authorized on FortiGate must be added manually on FortiSwitch manager

Explanation
According to the FortiManager Administration Guide1, “FortiManager obtains the FortiSwitch status information by querying the FortiGate REST API every three minutes.” Therefore, option B is true because it describes how FortiManager gets the information about the managed switches. According to the same guide2,
“If you make any changes in this module, you must install them on your managed device so that they are applied on your managed switches.” Therefore, option C is true because it describes what the administrator must do after making any changes on FortiSwitch manager. Option A is false because central management is the default management mode on FortiManager, not per-device management. Option D is false because anyswitch discovered or authorized on FortiGate will be automatically added on FortiSwitch manager, not manually.
1: https://docs.fortinet.com/document/fortimanager/7.0.0/administration-guide/734537/fortiswitch-manager 2:
https://docs.fortinet.com/document/fortimanager/7.0.0/administration-guide/734537/fortiswitch-manager#fortisw

QUESTION 26
Refer to the exhibit.
Examine the FortiGate RSSO configuration shown in the exhibit.

FortiGate is configured to receive RADIUS accounting messages on port3 to authenticate RSSO users. The incoming RADIUS accounting messages contain the username and group membership information in the User-Name and Class RADIUS attributes, respectively.
Which three settings must you configure onFortiGate to successfully authenticate RSSO users and matchthem to the existing RSSO user groups? (Choose three)