2026 Correct Practice Tests of NSE8_812 Dumps with Practice Exam [Q33-Q51]

May 10, 2026 examdumps 0 Comment

Tags: NSE8_812 latest exam camp questions, NSE8_812 latest study guide ppt, NSE8_812 latest test braindumps, NSE8_812 Real Questions, NSE8_812 test preparation, NSE8_812 test simulator online, NSE8_812 valid dumps book

4/5 - (1 vote)

2026 Correct Practice Tests of NSE8_812 Dumps with Practice Exam

Certification Sample Questions of NSE8_812 Dumps With 100% Exam Passing Guarantee

Fortinet NSE8_812 certification is highly valued in the industry and is recognized by many organizations worldwide. It demonstrates that the holder has the knowledge and skills required to manage and administer complex network security solutions using Fortinet products. Fortinet NSE 8 – Written Exam (NSE8_812) certification is a testament to the holder’s expertise in network security and can help them advance their career in the field.

NEW QUESTION 33
Refer to the exhibits.

The exhibits show a diagram of a requested topology and the base IPsec configuration.
A customer asks you to configure ADVPN via two internet underlays. The requirement is that you use one interface with a single IP address on DC FortiGate.
In this scenario, which feature should be implemented to achieve this requirement?

Use network-overlay id

Change advpn2 to IKEv1

Use local-id

Use peer-id

NEW QUESTION 34
Refer to the CLI output:

Given the information shown in the output, which two statements are correct? (Choose two.)

Geographical IP policies are enabled and evaluated after local techniques.

Attackers can be blocked before they target the servers behind the FortiWeb.

The IP Reputation feature has been manually updated

An IP address that was previously used by an attacker will always be blocked

Reputation from blacklisted IP addresses from DHCP or PPPoE pools can be restored

The CLI output shown in the exhibit indicates that FortiWeb has enabled IP Reputation feature with local techniques enabled and geographical IP policies enabled after local techniques (set geoip-policy-order after- local). IP Reputation feature is a feature that allows FortiWeb to block or allow traffic based on the reputation score of IP addresses, which reflects their past malicious activities or behaviors. Local techniques are methods that FortiWeb uses to dynamically update its own blacklist based on its own detection of attacks or violations from IP addresses (such as signature matches, rate limiting, etc.). Geographical IP policies are rules that FortiWeb uses to block or allow traffic based on the geographical location of IP addresses (such as country, region, city, etc.). Therefore, based on the output, one correct statement is that attackers can be blocked before they target the servers behind the FortiWeb. This is because FortiWeb can use IP Reputation feature to block traffic from IP addresses that have a low reputation score or belong to a blacklisted location, which prevents them from reaching the servers and launching attacks. Another correct statement is that reputation from blacklisted IP addresses from DHCP or PPPoE pools can be restored. This is because FortiWeb can use local techniques to remove IP addresses from its own blacklist if they stop sending malicious traffic for a certain period of time (set local-techniques-expire-time), which allows them to regain their reputation and access the servers. This is useful for IP addresses that are dynamically assigned by DHCP or PPPoEand may change frequently. References: https://docs.fortinet.com/document/fortiweb/6.4.0/administration-guide/19662/ip- reputationhttps://docs.fortinet.com/document/fortiweb/6.4.0/administration-guide/19662/geographical-ip- policies
https://docs.fortinet.com/document/fortiweb/7.4.2/administration-guide/608374/ip-reputation-blocklisting- source-ips-with-poor-reputation Fortinet compiles a reputation for each public IP address. Clients will have poor reputations if they have been participating in attacks, willingly or otherwise. Because blacklisting innocent clients is equally undesirable, Fortinet also restores the reputations of clients that improve their behavior. This is crucial when an infected computer is cleaned, or in DHCP or PPPoE pools where an innocent client receives an IP address that was previously leased by an attacker.

NEW QUESTION 35
Refer to the exhibit, which shows a multi-region SD-WAN architecture.

Given this scenario, which two statements are true? (Choose two.)

If iBGP is used, cross-regional spoke-to-hub shortcuts can be established.

If eBGP is used, ADVPN can be established for branch-to-branch traffic across regions.

If eBGP is used, ADVPN can be established only for branch-to-branch traffic within each region.

If iBGP is used, cross-regional spoke-to-hub shortcuts cannot be used.

NEW QUESTION 36
A retail customer with a FortiADC HA cluster load balancing five webservers in L7 Full NAT mode is receiving reports of users not able to access their website during a sale event. But for clients that were able to connect, the website works fine.
CPU usage on the FortiADC and the web servers is low, application and database servers are still able to handle more traffic, and the bandwidth utilization is under 30%.
Which two options can resolve this situation? (Choose two.)

Change the persistence rule to LB_PERSIS_SSL_SESSJD.

Add more web servers to the real server poof

Disable SSL between the FortiADC and the web servers

Add a connection-pool to the FortiADC virtual server

NEW QUESTION 37
You must analyze an event that happened at 20:37 UTC. One log relevant to the event is extracted from FortiGate logs:

The devices and the administrator are all located in different time zones Daylight savings time (DST) is disabled
* The FortiGate is at GMT-1000.
* The FortiAnalyzer is at GMT-0800
* Your browser local time zone is at GMT-03.00
You want to review this log on FortiAnalyzer GUI, what time should you use as a filter?

20:37:08

10:37:08

17:37:08

12.37:08

NEW QUESTION 38
A customer wants to use the FortiAuthenticator REST API to retrieve an SSO group called SalesGroup. The following API call is being made with the ‘curl’ utility:

Which two statements correctly describe the expected behavior of the FortiAuthenticator REST API? (Choose two.)

Only users with the “Full permission” role can access the REST API

This API call will fail because it requires that API version 2

If the REST API web service access key is lost, it cannot be retrieved and must be changed.

The syntax is incorrect because the API calls needs the get method.

NEW QUESTION 39
Refer to the exhibits.

The exhibit shows a FortiGate model device that will be used for zero touch provisioning and a CLI Template.

To facilitate a more efficient roll out of FortiGate devices, you are tasked with using meta fields with the CLI Template to configure the DHCP server on the “office1” FortiGate.
Given this scenario, what would be the output of the config ip-range section on the CLI Template?

NEW QUESTION 40
Refer to the exhibit, which shows the high availability configuration for the FortiAuthenticator (FAC1).

Based on this information, which statement is true about the next FortiAuthenticator (FAC2) member that will join an HA cluster with this FortiAuthenticator (FAC1)?

FAC2 can only process requests when FAC1 fails.

FAC2 can have its HA interface on a different network than FAC1.

The FortiToken license will need to be installed on the FAC2.

FSSO sessions from FAC1 will be synchronized to FAC2.

NEW QUESTION 41
Refer to the exhibits.

The exhibits show a FortiMail network topology, Inbound configuration settings, and a Dictionary Profile.
You are required to integrate a third-party’s host service (srv.thirdparty.com) into the e-mail processing path.
All inbound e-mails must be processed by FortiMail antispam and antivirus with FortiSandbox integration. If the email is clean, FortiMail must forward it to the third-party service, which will send the email back to FortiMail for final delivery, FortiMail must not scan the e-mail again.
Which three configuration tasks must be performed to meet these requirements? (Choose three.)

Change the scan order in FML-GW to antispam-sandbox-content.

Apply the Catch-Ail profile to the CFInbound profile and configure a content action profile to deliver to the srv. thirdparty. com FQDN

Create an access receive rule with a Sender value of srv. thirdparcy.com, Recipient value of *@acme.
com, and action value of Safe

Apply the Catch-AII profile to the ASinbound profile and configure an access delivery rule to deliver to the 100.64.0.72 host.

Create an IP policy with a Source value of 100. 64 .0.72/32, enable precedence, and place the policy at the top of the list.

NEW QUESTION 42
What is the benefit of using FortiGate NAC LAN Segments?

It provides support for multiple DHCP servers within the same VLAN.

It provides physical isolation without changing the IP address of hosts.

It provides support for IGMP snooping between hosts within the same VLAN

It allows for assignment of dynamic address objects matching NAC policy.

NEW QUESTION 43
Which two statements are correct on a FortiGate using the FortiGuard Outbreak Protection Service (VOS)? (Choose two.)

The FortiGuard VOS can be used only with proxy-base policy inspections.

If third-party AV database returns a match the scanned file is deemed to be malicious.

The antivirus database queries FortiGuard with the hash of a scanned file

The AV engine scan must be enabled to use the FortiGuard VOS feature

The hash signatures are obtained from the FortiGuard Global Threat Intelligence database.

NEW QUESTION 44
Refer to the exhibit containing the configuration snippets from the FortiGate. Customer requirements:

* SSLVPN Portal must be accessible on standard HTTPS port (TCP/443)
* Public IP address (129.11.1.100) is assigned to portl
* Datacenter.acmecorp.com resolves to the public IP address assigned to portl The customer has a Let’s Encrypt certificate that is going to expire soon and it reports that subsequent attempts to renew that certificate are failing.
Reviewing the requirement and the exhibit, which configuration change below will resolve this issue?

NEW QUESTION 45
Refer to the CLI configuration of an SSL inspection profile from a FortiGate device configured to protect a web server:

Based on the information shown, what is the expected behavior when an HTTP/2 request comes in?

FortiGate will reject all HTTP/2 ALPN headers.

FortiGate will strip the ALPN header and forward the traffic.

FortiGate will rewrite the ALPN header to request HTTP/1.

FortiGate will forward the traffic without modifying the ALPN header.

NEW QUESTION 46
You are running a diagnose command continuously as traffic flows through a platform with NP6 and you obtain the following output:

Given the information shown in the output, which two statements are true? (Choose two.)

Enabling bandwidth control between the ISF and the NP will change the output

The output is showing a packet descriptor queue accumulated counter

Enable HPE shaper for the NP6 will change the output

Host-shortcut mode is enabled.

There are packet drops at the XAUI.

NEW QUESTION 47
Refer to the exhibit, which shows the high availability configuration for the FortiAuthenticator (FAC1).

Based on this information, which statement is true about the next FortiAuthenticator (FAC2) member that will join an HA cluster with this FortiAuthenticator (FAC1)?

FAC2 can only process requests when FAC1 fails.

FAC2 can have its HA interface on a different network than FAC1.

The FortiToken license will need to be installed on the FAC2.

FSSO sessions from FAC1 will be synchronized to FAC2.

NEW QUESTION 48
A remote IT Team is in the process of deploying a FortiGate in their lab. The closed environment has been configured to support zero-touch provisioning from the FortiManager, on the same network, via DHCP options. After waiting 15 minutes, they are reporting that the FortiGate received an IP address, but the zero-touch process failed.
The exhibit below shows what the IT Team provided while troubleshooting this issue:

Which statement explains why the FortiGate did not install its configuration from the FortiManager?

The FortiGate was not configured with the correct pre-shared key to connect to the FortiManager

The DHCP server was not configured with the FQDN of the FortiManager

The DHCP server used the incorrect option type for the FortiManager IP address.

The configuration was modified on the FortiGate prior to connecting to the FortiManager

NEW QUESTION 49
You are migrating the branches of a customer to FortiGate devices. They require independent routing tables on the LAN side of the network.
After reviewing the design, you notice the firewall will have many BGP sessions as you have two data centers (DC) and two ISPs per DC while each branch is using at least 10 internal segments.
Based on this scenario, what would you suggest as the more efficient solution, considering that in the future the number of internal segments, DCs or internet links per DC will increase?

No change in design is needed as even small FortiGate devices have a large memory capacity.

Acquire a FortiGate model with more capacity, considering the next 5 years growth.

Implement network-id, neighbor-group and increase the advertisement-interval

Redesign the SD-WAN deployment to only use a single VPN tunnel and segment traffic using VRFs on BGP

NEW QUESTION 50
Refer to the exhibit, which shows an SD-WAN configuration.

You configured the SD-WAN from Branch1 to the HUB and enabled packet duplication. You later notice that the traffic is not being duplicated. In this scenario, what is causing this problem?

There is a mismatch in the FortiOS version between Branch1 and HUB.

Traffic cannot be duplicated over multiple zones.

Packet duplication is not enabled on the HUB side.

Packet duplication did not occur because an interface is out of SLA.

NEW QUESTION 51
Refer to the exhibit showing a FortiSOAR playbook.

You are investigating a suspicious e-mail alert on FortiSOAR, and after reviewing the executed playbook, you can see that it requires intervention.
What should be your next step?

Go to the Incident Response tasks dashboard and run the pending actions

Click on the notification icon on FortiSOAR GUI and run the pending input action

Run the Mark Drive by Download playbook action

Reply to the e-mail with the requested Playbook action

Fortinet NSE8_812 certification exam is a valuable certification for professionals who want to validate their knowledge and skills in the field of network security. It is a challenging exam that requires a high level of expertise in network security, but passing it can open up new career opportunities and demonstrate a commitment to professional development.

NSE8_812 Sample Practice Exam Questions 2026 Updated Verified: https://www.dumpsmaterials.com/NSE8_812-real-torrent.html