[2025] New LEED-AP-BD-C exam dumps Use Updated USGBC Exam [Q15-Q37]

November 12, 2025 examdumps 0 Comment

Tags: LEED-AP-BD-C formal test, LEED-AP-BD-C latest braindumps ppt, LEED-AP-BD-C latest exam camp questions, LEED-AP-BD-C latest test camp free, LEED-AP-BD-C test format, LEED-AP-BD-C valid test tutorial

5/5 - (1 vote)

[2025] New LEED-AP-BD-C exam dumps Use Updated USGBC Exam

Verified LEED-AP-BD-C Dumps Q&As – LEED-AP-BD-C Test Engine with Correct Answers

NEW QUESTION 15
The Required Breathing Zone Outdoor Airflow Vbz for a new banking facility is 0.120 CFM/ft2 (0.6 L/s/m2).
If the team decides to attempt Increased Ventilation under Option 2 in the Indoor Environmental Quality Credit, Enhanced Indoor Air Quality Strategies, what is the minimum Design Zone Outdoor Airflow?

0.144 CFM/ft2 (0.73 (L/s)/m2)

0.156 CFM/ft2 (0.79 (L/s)/m2)

0.168 CFM/ft2 (0.85 (L/s)/m2)

0.30 CFM/ft2 (1.5 (L/s)/m2)

NEW QUESTION 16
What stage of LEED for Neighborhood Development certification listed below is eligible for points under Building Design and Construction: New Construction, Location and Transportation Credit, LEED for Neighborhood Development Location?

LEED v4, LEED for Neighborhood Development Conditional Approval

LEED for Neighborhood Development Pilot, Stage 3 LEED for Neighborhood Development Certified Project

LEED for Neighborhood Development Pilot, Stage 1 LEED for Neighborhood Development Pre-reviewed Plan

LEED 2009, Stage 1 Conditional Approval of LEED for Neighborhood Development Plan

NEW QUESTION 17
LEED project boundaries that include multiple similar buildings which are all eligible for certification can be registered as which of the following?

Batch project

Group project

Master Site project

Neighborhood project

NEW QUESTION 18
Which of the following strategies can be used to achieve a point in Innovation Credit, Innovation, Option
1.Innovation?

Achieve 60% reduction in outdoor water use

Implement an employee engagement and education plan

Use on site renewable energy for 8% of the total energy needs

Purchase green power for 100% of the total project energy use

NEW QUESTION 19
Which of the following is required in determining the baseline for Water Efficiency Prerequisite, Indoor Water Use Reduction?

Duration of use

Building floor area

Make and model of fixtures

Proposed design fixture flow rates

NEW QUESTION 20
A project team reviews office chairs with a Type III environmental product declaration (EPD) for the five different categories of environmental impact reduction. Which of the following must the chairs demonstrate for product optimization?

A reduction in at least two categories

A reduction below the industry average in at least three categories

A 5% reduction in all categories

A 10% reduction in GHG emissions and a 10% reduction in at least two other categories

NEW QUESTION 21
When planning a water-efficient landscape design, the designer should consider including

potable water

sprinkler system

native vegetation

permeable pavement

NEW QUESTION 22
Several Materials and Resources credits give a bonus location valuation factor, which allows products extracted, manufactured and produced within 100 mi. (161 km) of the project to take double valuation in credit calculations. The intent of this bonus is

to shorten construction duration by reducing shipping times

to avoid spreading products with potentially invasive non-native pests

to incentivize the purchase of products that support the local economy

to promote design with indigenous materials in order to maintain local aesthetic quality

NEW QUESTION 23
Based on the results of a six-hour waste stream study, the project team for a retail project plans to provide dedicated areas for four easily recyclable waste streams: cardboard, plastic, metal and paper. The project is open to the public 10 hours a day, six days a week. Which of the following actions should be the project team’s top priority in order to demonstrate the minimum requirements to achieve Materials and Resources Prerequisite, Storage and Collection of Recyclables?

Take appropriate measures for the safe collection, storage and disposal of batteries

Make a waste stream projection for the entire year based on the six hours of the waste stream study

Make a waste stream projection for the entire week, based on the six hours of the waste stream study

Extend the waste stream study to cover a representative time period of a minimum of 24 hours to identify the top five recyclable waste streams

NEW QUESTION 24
What supporting material is required for all LEED Building Design and Construction projects in order to document Location and Transportation Credit, Bicycle Facilities for the bicycle network?

Photographs of bicycle network signage and directional signposts

Photographs of the installed bicycle storage and shower facilities

Vicinity map showing bicycle network, route and distance along network to eligible destination(s)

Manufacturer specifications for the chosen bicycle storage facilities, including the number of bicycles supported by each bike rack

NEW QUESTION 25
For a task chair purchased for a healthcare facility, which portion of the product contributes toward Materials and Resources Credit, Furniture and Medical Furnishings?

Wheels, 4% of product by weight, that do not contain lead, mercury, cadmium or antimony

Fabric, 5% of product by weight, with stain resistant treatment containing Perfluorinated Compounds (PFCs)

Metal base, 20% of product by weight, which do not contain heavy metals and is not plated with hexavalent chromium

Plastic armrests, 30% of product by weight, with added antimicrobial treatment

NEW QUESTION 26
Which of the following statements is correct when defining the project boundary?

The LEED project boundary cannot include non-contiguous land

The LEED project boundary cannot include more than one building

The land associated with the project supports typical operation

The gross floor area of the LEED project should be no less than 1% of the gross land area within the LEED project boundary

NEW QUESTION 27
Which of the following assessments is conducted prior to the completion of the schematic design and explores methods to reduce energy use within a proposed building?

Energy audit

Building systems commissioning (Cx)

Simple box energy analysis

Mechanical systems inspection

NEW QUESTION 28
Which of the following innovation proposals is most likely to be successful to achieve an Innovation Credit?

Providing an educational program on the environmental and human health benefits of green building practices

Including locked, indoor bicycle storage for 100% of project occupants

Being located next to a 20 mi. (32 km) award-winning bicycle trail

Distributing leaflets to project occupants about available public transit services nearby

NEW QUESTION 29
Which of the following prerequisites or credits are affected by using plug-in devices when attempting to achieve Indoor Environmental Quality Credit. Thermal Comfort?

Energy and Atmosphere Credit. Demand Response

Energy and Atmosphere Credit. Advanced Energy Metering

Energy and Atmosphere Prerequisite. Minimum Energy Performance

Energy and Atmosphere Prerequisite. Building Level Energy Metering

NEW QUESTION 30
Building Product Disclosure and Optimization is based on market

reliability

durability

transparency

consumption

NEW QUESTION 31
What is the definition of the evapotranspiration rate?

Evaporation of onsite reuse water

Percentage of potable water usage for irrigation

Water loss from evaporation in micro irrigation systems

Amount of water loss in a vegetated surface in units of water depth

NEW QUESTION 32
Which of the following activities must be prohibited within a building as a prerequisite to LEED certification?

Burning fossil fuels

Smoking tobacco products

Preparing non-organic foods

Manufacturing toxic chemicals

NEW QUESTION 33
When planning a water-efficient landscape design, the designer should consider including

potable water

sprinkler system

native vegetation

permeable pavement

NEW QUESTION 34
A project is designed to remodel an existing warehouse into multi-family housing. The exterior facade of the warehouse will remain, but 40% of the interior will be demolished and replaced for interior new construction. New materials will be used for the new construction. To achieve points in the Materials and Resources Credit, Building Life-Cycle Impact Reduction, which credit path option would apply?

Historic Building Reuse

Building and Material Reuse

Whole-Building Life-Cycle Assessment

Renovation of Abandoned or Blighted Building

NEW QUESTION 35
A consultant specifies the required U-value, solar heat gain coefficient, and visible light transmittance for a project. What type of building envelope assembly would require these attributes?

Floors

Roofs

Walls

Windows

NEW QUESTION 36
Which site preparation and construction method contributes to earning the Materials and Resources Credit, Construction and Demolition Waste Management?

Reuse excavated soil and land-clearing debris

Implement in situ soil remediation and post removal of the existing concrete pavement

Salvage and recycle 50% of the existing materials (based on volume) generated during site demolition for three material streams

Ensure reduction of pollution from construction activities by using airborne dust generation capture systems

NEW QUESTION 37
A commercial new construction project consists of mixed space usage. When deciding which LEED rating system to use, the LEED AP should follow which of the following rules?

If a rating system is appropriate for less than 50% of the gross area of the LEED project space then the rating system must not be used

If a rating system is appropriate for more than 50% of the gross floor area of LEED project space, then that rating system must be used

If a rating system is appropriate for 30% to 60% of the gross floor area, the project team must independently assess their situation and decide which rating system is most applicable

If a rating system is appropriate for 40% to 60% of the gross floor area, the project team must independently assess their situation and decide which rating system is most applicable

USGBC LEED-AP-BD-C Exam Syllabus Topics:

Topic	Details
Topic 1	Water Efficiency: This topic measures the skills of LEED Green Associates in optimizing water use in building projects. It explores strategies for reducing outdoor water use through efficient irrigation practices, including landscape water requirements and irrigation systems. It also covers using native and adaptive plant species to minimize irrigation demands.
Topic 2	LEED Process: This topic tests the skills of LEED Green Associates involved in green building initiatives. It focuses on various methods to achieve LEED goals, such as developing credit interpretation rulings and utilizing Regional Priority Credits to explore synergies within the LEED system.
Topic 3	Energy and Atmosphere: In this topic, LEED Green Associates focuses on building reuse, including historic building renovations. It covers material reuse strategies, enclosure materials, and permanently installed interior components into new designs.
Topic 4	Sustainable Sites: It covers site assessment and planning that involves evaluating various site characteristics, such as topography, hydrology, climate, vegetation, and soil conditions. It also covers assessing a site’s potential as a resource for energy flows while addressing construction activity pollution prevention measures.
Topic 5	Location and Transportation: This topic measures the skills of LEED Green Associates in sustainable development. It addresses critical factors in site selection, including development constraints and opportunities related to environmental considerations, and community connectivity concepts, such as walkability and street design, which are vital for promoting sustainable transportation options.
Topic 6	Project Surroundings and Public Outreach: LEED Green Associates learn about promoting sustainable practices, regional design considerations that incorporate green construction measures, cultural awareness issues related to historic or heritage impacts, and ensuring that sustainability efforts are respectful of local values.
Topic 7	Integrative Strategies: It emphasizes the importance of an integrative process. The topic also covers their knowledge about the value of teamwork in developing integrative green strategies and how they can collaborate throughout different project phases.
Topic 8	Indoor Environmental Quality: This domain measures the skills of LEED Green Associates in creating healthy indoor environments. It emphasizes the importance of maintaining adequate ventilation levels through both natural and mechanical means. Additionally, candidates will be assessed on topics such as tobacco smoke control measures.