Verified 200-301 Exam Dumps PDF [2024] Access using DumpsMaterials [Q238-Q257]

NO.238 Drag and Drop Question
Drag drop the descriptions from the left on to the correct configuration-management technologies on the right.
Select and Place:

NO.239 Refer to the exhibit. A network engineer must configure router R1 with a host route to the server.
Which command must the engineer configure?

NO.240 Which WAN topology has the highest degree of reliability?

NO.241 Refer to the exhibit.

A static route must be configured on R14 to forward traffic for the 172 21 34 0/25 network that resides on R86 Which command must be used to fulfill the request?

NO.242 Refer to Exhibit.

Refer to the exhibit. Each router must be configured with the last usable IP address in the subnet. Which configuration fulfills this requirement?

NO.243 A network engineer must configure the router R1 GigabitEthernet1/1 interface to connect to the router R2 GigabitEthernet1/1 interface. For the configuration to be applied the engineer must compress the address
2001:0db8:0000:0000:0500:000a:400F:583B. Which command must be issued on the interface?

NO.244 Drag and drop the AAA functions from the left onto the correct AAA services on the right

NO.245 Drag and drop the characteristics of network architectures from the left onto the type of architecture on the right.

NO.246 How does a switch process a frame received on Fa0/1 with the destination MAC address of 0e38.7363.657b when the table is missing the address?

NO.247 When a site-to-site VPN is used, which protocol is responsible for the transport of user data?

NO.248 When the LAG configuration is updated on a Cisco WLC which additional task must be performed when changes are complete?

NO.249 An engineer must configure a/30 subnet between two routers. Which usable IP address and subnet mask combination meets this criteria?

NO.250 Which technology supports multiple dynamic secure connections over an unsecure transport network?

NO.251 What is a benefit of using a Cisco Wireless LAN Controller?

NO.252 Refer to the exhibit.

Router R1 is running three different routing protocols. Which route characteristic is used by the router to forward the packet that it receives for destination IP 172.16.32.1?

NO.253 Drag and drop the SNMP components from the left onto the descriptions on the right.

NO.254 Refer to the exhibit.

Which command configures a floating static route to provide a backup to the primary link?

NO.255 A router running EIGRP has learned the same route from two different paths.
Which parameter does the router use to select the best path?

NO.256 Refer to the exhibit.

To which device does Router1 send packets that are destined to host 10.10.13.165?

NO.257 An engineer is tasked to configure a switch with port security to ensure devices that forward unicasts multicasts and broadcasts are unable to flood the port The port must be configured to permit only two random MAC addresses at a time Drag and drop the required configuration commands from the left onto the sequence on the right Not all commands are used.