[Aug-2025] Pass Cisco 350-401 Exam in First Attempt Guaranteed! [Q30-Q51]

August 25, 2025August 25, 2025 examdumps[Aug-2025] Pass Cisco 350-401 Exam in First Attempt Guaranteed! [Q30-Q51] 0 Comment

5/5 - (2 votes)

[Aug-2025] Pass Cisco 350-401 Exam in First Attempt Guaranteed!

Full 350-401 Practice Test and 361 unique questions with explanations waiting just for you, get it now!

NO.30 Refer to the exhibit.

A network engineer configures NAT on R1 and enters me show command to verity the configuration What toes the output confirm?

The first pocket triggered NAT to add on entry to NAT table

R1 is configured with NAT overload parameters

A Telnet from 160.1.1 1 to 10.1.1.10 has been initiated.

R1 to configured with PAT overload parameters

NO.31 Which two methods are used by an AP that is typing to discover a wireless LAN controller? (Choose two.)

Cisco Discovery Protocol neighbour

broadcasting on the local subnet

DNS lookup cisco-DNA-PRIMARY.localdomain

DHCP Option 43

querying other APs

NO.32 Refer to the exhibit.

Refer to the exhibit An engineer is troubleshooting a newly configured BGP peering that does not establish What is the reason for the failure?

BGP peer 10 255 255 3 is not configured for peenng wth R1

Mandatory BOP parameters between R1 and 10 255 255 3 are mismatched

A firewall is blocking access to TCP port 179 on the BGP peer 10 255 255.3

Both BGP pern are configured for passive TCP transport

NO.33 An engineer is configuring a new SSID to present users with a splash page for authentication.
Which WLAN Layer 3 setting must be configured to provide this functionally?

CCKM

WPA2 Policy

Local Policy

Web Policy

https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan- controllers/100787-splash-page-redirect.html

NO.34 Drag and drop the characteristics from the left onto the architectures on the right.

Explanation:

NO.35 What is the purpose of a data modeling language?

to establish a framework to process data by using an object-oriented programming approach

to specify the rules for transcoding between text and binary data encodings

to standardize the procedures that are executed when parsing sent and received data

to describe the structure and meaning of exchanged data

NO.36 Which feature is supported by EIGRP but is not supported by OSPF?

equal-cost load balancing

route filtering

unequal-cost load balancing

route summarization

EIGRP support unequal-cost load balancing via the “variance …” while OSPF only supports equalcost
load balancing.

NO.37 An engineer creates the configuration below. Drag and drop the authentication methods from the left into the order of priority on the right. Not all options are used.

NO.38 Which three statements about EVCs are true? (Choose three.)

Spanning Tree must use RSTP mode on EVC ports.

Spanning Tree must use MST mode on EVC ports.

LACP is supported on EVC ports.

Layer 2 multicast framing is supported.

Bridge domain routing is required.

PAGP is supported on EVC ports.

Explanation/Reference:

NO.39 Refer to the exhibit.

What are two effect of this configuration? (Choose two.)

Inside source addresses are translated to the 209.165.201.0/27 subnet.

It establishes a one-to-one NAT translation.

The 10.1.1.0/27 subnet is assigned as the inside global address range.

The 209.165.201.0/27 subnet is assigned as the outside local address range.

The 10.1.1.0/27 subnet is assigned as the inside local addresses.

NO.40 Drag and drop the characteristics from the left onto the infrastructure deployment models on the right.

Explanation:

NO.41 An engineer is working with the Cisco DNA Center API Drag and drop the methods from the left onto the actions that they are used for on the right.

Explanation

NO.42 Drag and drop the characteristics from the left to the correct Infrastructure deployment type on the right.

Explanation

NO.43 A wireless consultant is designing a high-density wireless network for a lecture hall for 1000 students Which antenna type is recommended for this environment?

sector antenna

dipole antenna

parabolic dish

omnidirectional antenna

Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/87/b_wireless_high_client_density_design_

NO.44 How is a data modeling language used?

To enable data to be easily structured, grouped validated, and replicated

To represent finite and well-defined network elements that cannot be changed.

To model the flows of unstructured data within the infrastructure.

To provide human readability to scripting languages

NO.45 Which two protocol exclude the source and destination IP addresses from the application data stream?
(Choose two.)

SNMP

SMTP

SSH

TFTP

NTP

NO.46 Drag and drop the characteristics from the left onto the infrastructure deployment models they describe on the right.

NO.47 Which function does a Cisco SD-Access extended node perform?

provides fabric extension to nonfabric devices through remote registration and configuration

performs tunneling between fabric and nonfabric devices to route traffic over unknown networks

used to extend the fabric connecting to downstream nonfabric enabled Layer 2 switches

in charge of establishing Layer 3 adjacencies with nonfabric unmanaged node

NO.48 What is a requirement for an Ansible-managed node?

It must have an Ansible Tower installed.

It must have an SSH server running

It must support ad hoc commands

It must be a Linux server or a Cisco device

Explanation
Ansible can communicate with modern Cisco devices via SSH or HTTPS so it does not require an SSH server -> Answer ‘It must have an SSH server running’ is not correct.
An Ansible ad-hoc command uses the /usr/bin/ansible command-line tool to automate a single task on one or more managed nodes. Ad-hoc commands are quick and easy, but they are not reusable -> It is not a requirement either -> Answer ‘It must support ad hoc commands’ is not correct.
Ansible Tower is a web-based solution that makes Ansible even more easy to use for IT teams of all kinds. But it is not a requirement to run Ansible -> Answer ‘It must have an Ansible Tower installed’ is not correct.
Therefore only answer ‘It must be a Linux server or a Cisco device’ is the best choice left. An Ansible controller (the main component that manages the nodes), is supported on multiple flavors of Linux, but it cannot be installed on Windows.

NO.49 Drag and drop the characteristics from the left onto the appropriate infrastructure deployment types on the right.

Explanation:

NO.50

Refer to the exhibit. Communication between London and New York is down. Which command set must be applied to the NewYork switch to resolve the issue?

The commands shown in Option C are the appropriate ones to resolve the connectivity issue. The command no interface po1 disables the port-channel interface, which might be causing a conflict or misconfiguration.
The interface range fa0/1-2 command selects the range of interfaces to be configured next. The channel-group
1 mode passive command adds these interfaces to an EtherChannel group in passive mode, which waits for LACP packets from another LACP-enabled device before forming an EtherChannel link. Finally, the end command exits the configuration mode.
References := This answer is based on the knowledge from the Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) course

NO.51 Refer to the exhibit.

Router 1 is currently operating as the HSRP primary with a priority of 110 router1 fails and router2 take over the forwarding role. Which command on router1 causes it to take over the forwarding role when it return to service?