Free 300-410 Sample Questions and 100% Cover Real Exam Questions (Updated 630 Questions) [Q10-Q24]

January 26, 2026January 26, 2026 examdumpsFree 300-410 Sample Questions and 100% Cover Real Exam Questions (Updated 630 Questions) [Q10-Q24] 0 Comment

Tags: 300-410 exam pass guide, 300-410 reliable exam objectives pdf, 300-410 reliable exam simulator fee, 300-410 valid test questions and answers

4.7/5 - (3 votes)

Free 300-410 Sample Questions and 100% Cover Real Exam Questions (Updated 630 Questions)

Download Real Cisco 300-410 Exam Dumps Test Engine Exam Questions

What Does a Cisco Certified Entry Network Technician (CCENT) Do?

Explanation of these topics include configuration, cabling, patching, troubleshooting and security. Reach out to the global world and expand your business by achieving your goal. Explanation of concepts such as IP addressing, subnets, default gateway and routing are part of this Cisco certification. Learn the latest Cisco certification with the help of Cisco 300-410 exam dumps. Reach out to the global world by filling in the knowledge gap in the IT industry.

NEW QUESTION 10
How are MPLS Layer 3 VPN services deployed?

The RD and RT values must match under the VRR

The RD and RT values under a VRF must match on the remote PE router

The import and export RT values under a VRF must always be the same.

The label switch path must be available between the local and remote PE routers.

Explanation
https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/vpn/65x/b-l3vpn-cg-ncs5500-65x/b-l3vpn-cg-ncs5500-65x The ingress PE router must be able to reach the egress PE router for a packet to be relayed to its destination.

NEW QUESTION 11
Refer to the exhibit.

The administrator successfully logs into R1 but cannot access privileged mode commands. What should be configured to resolve the issue?

aaa authorization reverse-access

secret cisco123! at the end of the username command instead of password cisco123!

matching password on vty lines as cisco123!

enable secret or enable password commands to enter into privileged mode

NEW QUESTION 12

Refer to the exhibit. An engineer applied filter on R1 The interface flapped between R1 and R2 and cleaning the BGP session did not restore the BGP session and failed Which action must the engineer take to restore the BGP session from R2 to R1?

Apply the IPv6 traffic filter in the outbound direction on the interface

ICMPv6 must be permitted by the IPv6 traffic filter

Enable the BGP session, which went down when the session was cleared.

Swap the source and destination IP addresses in the IPv6 traffic filter

NEW QUESTION 13
Which mechanism provides traffic segmentation within a DMVPN network?

RSVP

BGP

MPLS

iPsec

NEW QUESTION 14
Refer to the exhibit.

Which action resolves the failed authentication attempt to the router?

Configure aaa authorization login command on line vty 0 4

Configure aaa authorization login command on line console 0

Configure aaa authorization console global command

Configure aaa authorization console command on line vty 0 4

In the debug output, we see that the Authorization (not Authentication) failed so we need to correct the authorization. In order to enable authorization, we must use the global command
“aaa authorization console” first.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/security/a1/sec-a1-cr-book/sec-cr-a1.html

NEW QUESTION 15
Drag and Drop Question
Drag and drop the IPv6 first hop security device roles from the left onto the corresponding descriptions on the right.

NEW QUESTION 16
Refer to the exhibit.

The security department recently installed a monitoring device between routers R3 and R5, which a loss of network connectivity for users connected to R5. Troubleshooting revealed that the monitoring device cannot forward multicast packets. The team already updated R5 with the correct configuration. Which configuration must be implemented on R3 to resolve the problem by ensuring R3 as the DR for the R3-R5 segment?

NEW QUESTION 17
Drag and drop the OSPF adjacency states from the left onto the correct descriptions on the right.

Explanation
Exchange = Each router compares the DBD packets that were received from the other router
2-way = Router exchange information with other routers in the multiaccess network Loading = The neighboring router requests the other routers to send missing entries Exstart = The network has already elected a DR and a backup BDR Init = The OSPF router ID of the receiving router was not contained in the hello message Down = No hellos have been received from a neighbor router

NEW QUESTION 18

Refer to the exhibit. An engineer noticed that the router log messages do not have any information about when the event occurred. Which action should the engineer take when enabling service time stamps to improve the logging functionality at a granular level?

Configure the debug uptime option

Configure the msec option

Configure the timezone option

Configure the tog uptime option

NEW QUESTION 19
Refer to the exhibit.

A network engineer finds that PC1 is accessing the hotel website to do the booking but fails to make payment.
Which action resolves the issue?

Allow stub network 10.10.202.168/30 on router R3 OSPF.

Decrease the AD to 5 OSPF route 192.168.94.0 on R1.

Increase the AD to 200 of static route 192.168.94.0 on R3.

Configure a reverse route on R1 for PC1 172.16.1.0/24.

NEW QUESTION 20
A network engineer is investigating a flapping (up/down) interface issue on a core switch that is synchronized to an NTP server. Log output currently does not show the time of the flap. Which command allows the logging on the switch to show the time of the flap according to the clock on the device?

service timestamps log uptime

clock summer-time mst recurring 2 Sunday mar 2:00 1 Sunday nov 2:00

service timestamps log datetime localtime show-timezone

clock calendar-valid

By default, Catalyst switches add a simple uptime timestamp to logging messages. This is a cumulative counter that shows the hours, minutes, and seconds since the switch has been booted up

NEW QUESTION 21
Refer to the exhibit.

R1 is configured with uRPF, and ping to R1 is failing from a source present in the R1 routing table via the GigatxtEthernet 0/0 interface. Which action resolves the issue?

Remove the access list from the interface GigabrtEthernet 0/0

Modify the uRPF mode from strict to loose

Enable Cisco Express Forwarding to ensure that uRPF is functioning correctly

Add a floating static route to the source on R1 to the GigabitEthernet 0/1 interface

NEW QUESTION 22
Refer to the exhibit.

The network administrator configured VRF lite for customer A. The technician at the remote site misconfigured VRF on the router. Which configuration will resolve connectivity for both sites of customer_a?

Option A

Option B

Option C

Option D

From the exhibit, we learned:
+ VRF customer_a was exported with Route target (RT) of 1:1 so at the remote site it must be imported with the same RT 1:1.
+ VRF customer_a was imported with Route target (RT) of 1:1 so at the remote site it must be exported with the same RT 1:1.
Therefore at the remote site we must configure the command “route-target both 1:1” (which is equivalent to two commands “route-target import 1:1” & “route-target export 1:1”.

NEW QUESTION 23

Refer to the exhibit. The default route is not advertised to the neighboring router. Which action resolves the issue?