First Attempt Guaranteed Success in FCP_FGT_AD-7.4 Exam 2025 [Q51-Q74]

November 8, 2025 examdumps 0 Comment

Tags: FCP_FGT_AD-7.4 latest exam collection, FCP_FGT_AD-7.4 practice engine, FCP_FGT_AD-7.4 prep guide, FCP_FGT_AD-7.4 reliable test duration, FCP_FGT_AD-7.4 test blueprint, new FCP_FGT_AD-7.4 test topics pdf

4.9/5 - (7 votes)

First Attempt Guaranteed Success in FCP_FGT_AD-7.4 Exam 2025

Real FCP_FGT_AD-7.4 Exam Questions are the Best Preparation Material

Fortinet FCP_FGT_AD-7.4 Exam Syllabus Topics:

Topic	Details
Topic 1	Content Inspection: This section covers how to inspect encrypted traffic, configure inspection modes, apply web filtering, manage applications, set antivirus modes, and implement IPS for security.
Topic 2	Routing: This section covers how to set up packet routing with static routes and configure SD-WAN for efficient traffic load balancing.
Topic 3	Deployment and System Configuration: This section covers how to set up initial configurations, implement Fortinet Security Fabric, and configure an FGCP HA cluster; diagnose resources and connectivity.
Topic 4	Firewall Policies and Authentication: This topic covers how to set firewall policies, configure SNAT DNAT, implement authentication methods, and deploy FSSO.
Topic 5	VPN: In this section, the focus is on how to configure SSL VPNs for secure network access and implement meshed or redundant IPsec VPNs.

QUESTION 51
Which two statements correctly describe the differences between IPsec main mode and IPsec aggressive mode? (Choose two.)

The first packet of aggressive mode contains the peer ID, while the first packet of main mode does not.

Main mode cannot be used for dialup VPNs, while aggressive mode can.

Aggressive mode supports XAuth, while main mode does not.

Six packets are usually exchanged during main mode, while only three packets are exchanged during aggressive mode.

QUESTION 52
An employee needs to connect to the office through a high-latency internet connection.
Which SSL VPN setting should the administrator adjust to prevent SSL VPN negotiation failure?

SSL VPN idle-timeout

SSL VPN login-timeout

SSL VPN dtls-hello-timeout

SSL VPN session-ttl

QUESTION 53
An administrator is configuring an IPsec VPN between site A and site B. The Remote Gateway setting in both sites has been configured as Static IP Address.
For site A, the local quick mode selector is 192.168.1.0/24 and the remote quick mode selector is 192.168.2.0/24.
Which subnet must the administrator configure for the local quick mode selector for site B?

192.168.3.0/24

192.168.0.0/8

192.168.2.0/24

192.168.1.0/24

QUESTION 54
Which statement is a characteristic of automation stitches?

They can be run only on devices in the Security Fabric.

They can be created only on downstream devices in the fabric.

They can have one or more triggers.

They can run multiple actions at the same time.

QUESTION 55
In which two ways can RPF checking be disabled? (Choose two.)

Enable anti-replay in firewall policy.

Enable asymmetric routing.

Disable strict-src-check under system settings.

Disable the RPF check at the FortiGate interface level for the source check.

QUESTION 56
Which two settings can be separately configured per VDOM on a FortiGate device? (Choose two.)

FortiGuard update servers

System time

Operating mode

NGFW mode

QUESTION 57
Refer to the exhibits.

The exhibits show the application sensor configuration and the Excessive-Bandwidth and Apple filter details.
Based on the configuration, what will happen to Apple FaceTime if there are only a few calls originating or incoming?

Apple FaceTime will be allowed, based on the Video/Audio category configuration.

Apple FaceTime will be allowed, based on the Apple filter configuration.

Apple FaceTime will be allowed only if the Apple filter in Application and Filter Overrides is set to Allow.

Apple FaceTime will be blocked, based on the Excessive-Bandwidth filter configuration.

QUESTION 58
Refer to the exhibit, which shows a partial configuration from the remote authentication server.

Why does the FortiGate administrator need this configuration?

To authenticate only the Training user group.

To set up a RADIUS server Secret

To authenticate and match the Training OU on the RADIUS server.

To authenticate Any FortiGate user groups.

QUESTION 59
Refer to the exhibits, which show the firewall policy and the security profile for Facebook.

Users are given access to the Facebook web application. They can play video content hosted on Facebook but they are unable to leave reactions on videos or other types of posts.
Which part of the configuration must you change to resolve the issue?

Make the SSL inspection a deep content inspection

Add Facebook to the URL category in the security policy

Disable HTTP redirect to HTTPS on the web browser

Get the additional application signatures required to add to the security policy

QUESTION 60
Which statement is correct regarding the use of application control for inspecting web applications?

Application control can identify child and parent applications, and perform different actions on them.

Application control signatures are organized in a nonhierarchical structure.

Application control does not require SSL inspection to identify web applications.

Application control does not display a replacement message for a blocked web application.

QUESTION 61
Which statement is correct regarding the inspection of some of the services available by web applications embedded in third-party websites?

The security actions applied on the web applications will also be explicitly applied on the third-party websites.

The application signature database inspects traffic only from the original web application server.

FortiGuard maintains only one signature of each web application that is unique.

FortiGate can inspect sub-application traffic regardless where it was originated.

QUESTION 62
Which three strategies are valid SD-WAN rule strategies for member selection? (Choose three.)

Manual with load balancing

Lowest Cost (SLA) with load balancing

Best Quality with load balancing

Lowest Quality (SLA) with load balancing

Lowest Cost (SLA) without load balancing

QUESTION 63
An administrator is configuring an IPsec VPN between site A and site B. The Remote Gateway setting in both sites has been configured as Static IP Address.
For site A, the local quick mode selector is 192.168.1.0/24 and the remote quick mode selector is 192.168.2.0/24.
Which subnet must the administrator configure for the local quick mode selector for site B?

192.168.3.0/24

192.168.0.0/8

192.168.2.0/24

192.168.1.0/24

QUESTION 64
Refer to the exhibits.
The exhibits show a firewall policy (Exhibit A) and an antivirus profile (Exhibit B).

Why is the user unable to receive a block replacement message when downloading an infected file for the first time?

The volume of traffic being inspected is too high for this model of FortiGate.

The intrusion prevention security profile needs to be enabled when using flow-based inspection mode.

The firewall policy performs the full content inspection on the file.

The flow-based inspection is used, which resets the last packet to the user.

The flow-based inspection is used, which resets the last packet to the user.
Key to right answer is “unable to receive a block replacement message when downloading an infected file for the first time”.
* “ONLY” If the virus is detected at the “START” of the connection, the IPS engine sends the block replacement message immediately
* When a virus is detected on a TCP session (FIRST TIME), but where “SOME PACKETS” have been already forwarded to the receiver, FortiGate “resets the connection” and does not send the last piece of the file. Although the receiver got most of the file content, the file has been truncated and therefore, can’t be opened. The IPS engine also caches the URL of the infected file, so that if a “SECOND ATTEMPT” to transmit the file is made, the IPS engine will then send a block replacement message to the client instead of scanning the file again.
Two possible scenarios can occur when a virus is detected:
– When a virus is detected on a TCP session where some packets have been already forwarded to the receiver, FG resets the connection and does not send the last piece of the file. Although the receiver got most of the file content, the file has been truncated and therefore, can’t be opened. The IPS engine also caches the URL of the infected file, so that IF A SECOND ATTEMPT TO TRANSMIT THE FILE IS MADE, THE IPS ENGINE WILL SEND A BLOCK REPLACEMENT MESSAGE to the client instead of scanning the file again.
– If the virus is detected at the start of the connection, the IPS engine sends the block replacement message immediately.
In flow based inspection, when a virus is detected on a TCP session where some packets have been already forwarded to the receiver, FortiGate resets the connection and does not send the last piece of the file. Although the receiver got most of the file content, the file has been truncated and therefore, can’t be opened. The IPS engine also caches the URL of the infected file, so that if a second attempt to transmit the file is made, the IPS engine will then send a block replacement message to the client instead of scanning the file again.

QUESTION 65
Which of the following are valid actions for FortiGuard category based filter in a web filter profile ui proxy-based inspection mode? (Choose two.)

Warning

Exempt

Allow

Learn

QUESTION 66
Refer to the exhibit showing a debug flow output.

What two conclusions can you make from the debug flow output? (Choose two.)

The debug flow is for ICMP traffic.

A firewall policy allowed the connection.

A new traffic session was created.

The default route is required to receive a reply.

QUESTION 67
Which two statements about FortiGate antivirus databases are true? (Choose two.)

The quick scan database is part of the normal database.

The extreme database is available only on certain FortiGate models.

The extended database is available on all FortiGate models.

The extended database is available only if AI scanning is enabled.

QUESTION 68
Refer to the exhibit.

Which two statements are true about the routing entries in this database table? (Choose two.)

All of the entries in the routing database table are installed in the FortiGate routing table.

The port2 interface is marked as inactive.

Both default routes have different administrative distances.

The default route on porc2 is marked as the standby route.

QUESTION 69
Which statement about the policy ID number of a firewall policy is true?

It is required to modify a firewall policy using the CLI.

It represents the number of objects used in the firewall policy.

It changes when firewall policies are reordered.

It defines the order in which rules are processed.

QUESTION 70
Refer to the exhibits.

The exhibits show a diagram of a FortiGate device connected to the network, as well as the IP pool configuration and firewall policy objects.
The WAN (port1) interface has the IP address 10.200.1.1/24. The LAN (port3) interface has the IPaddress 10.0.1.254/24.
Which IP address will be used to source NAT (SNAT) the traffic, if the user on Local-Client (10.0.1.10) pings the IP address of Remote-FortiGate (10.200.3.1)?

10.200.1.1

10.200.1.149

10.200.1.99

10.200.1.49

QUESTION 71
A network administrator has enabled full SSL inspection and web filtering on FortiGate. When visiting any HTTPS websites, the browser reports certificate warning errors. When visiting HTTP websites, the browser does not report errors.
What is the reason for the certificate warning errors?

The option invalid SSL certificates is set to allow on the SSL/SSH inspection profile

The browser does not trust the certificate used by FortiGate for SSL inspection

The certificate used by FortiGate for SSL inspection does not contain the required certificate extensions.

The matching firewall policy is set to proxy inspection mode

QUESTION 72
You can configure FortiGate to store logs on syslog servers, FortiCloud, FortiSIEM, FortiAnalyzer, or FortiManager. These logging devices can also be used as a backup solution. Whenever possible, it is preferred to store logs externally.
If storing logs locally does not fit your requirements, you can store logs externally. You can configure FG to store logs on syslog servers, FortiCloud, FortiSIEM, FortiAnalyzer or FortiManager. These logging devices can also be used as a backup solution.
192.Examine this PAC file configuration.

Which of the following statements are true? (Choose two.)

Browsers can be configured to retrieve this PAC file from the FortiGate.

Any web request to the 172.25. 120.0/24 subnet is allowed to bypass the proxy.

All requests not made to Fortinet.com or the 172.25. 120.0/24 subnet, have to go through altproxy.corp.com: 8060.

Any web request fortinet.com is allowed to bypass the proxy.

QUESTION 73
Refer to the exhibits.

The exhibits show a diagram of a FortiGate device connected to the network, as well as the IP pool configuration and firewall policy objects.
The WAN (port1) interface has the IP address 10.200.1.1/24. The LAN (port3) interface has the IPaddress 10.0.1.254/24.
Which IP address will be used to source NAT (SNAT) the traffic, if the user on Local-Client (10.0.1.10) pings the IP address of Remote-FortiGate (10.200.3.1)?

10.200.1.1

10.200.1.149

10.200.1.99

10.200.1.49

QUESTION 74
Examine the IPS sensor and DoS policy configuration shown in the exhibit, then answer the question below.

When detecting attacks, which anomaly, signature, or filter will FortiGate evaluate first?